| Property | Value |
|---|---|
| Width | 1,000 mm to 2,500 mm |
| Length | 2,000 mm to 6,000 mm |
| Thickness | 0.2 mm to 6 mm |
| Tensile Strength | 18,855 PSI to 29,000 PSI |
| Yield Strength | 18,130 PSI |
| Elongation at Break | 8.3% to 28% |
| Density | 0.098 lb/in3 |
| Melting Point | 1,190-1,210 °F |
3003 aluminum sheet plate is a common type of aluminum alloy that has good formability, corrosion resistance, and weldability. It is mainly used for applications that require low weight and high strength, such as cooking utensils, decorative trim, pressure vessels, and piping. It is composed of about 98.7% aluminum, 1.0-1.5% manganese, 0.12-0.20% copper, and some other trace elements. It can be hardened by cold working, but not by heat treatment. It has a bright reflective finish and can be produced in various forms, such as coil, sheet, plate, treadplate, perforated sheet, and expanded sheet.
Huasheng Aluminum can provide you with 3003 Aluminium sheet & Plate in different sizes, shapes, and finishes, according to your specifications and needs. We have advanced equipment, strict quality control, and professional service to ensure your satisfaction. Contact us today to get a quote and place your order.
The mechanical properties of 3003 aluminum sheet plate vary depending on the temper, thickness, and product form. Here is a table that summarizes some of the typical mechanical properties of 3003 aluminum sheet plate from different sources:
| Temper | Thickness (mm) | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) |
| O | 0.5-6.0 | 110 | 40 | 28 |
| H12 | 0.5-6.0 | 130 | 100 | 11 |
| H14 | 0.5-6.0 | 160 | 130 | 8.3 |
| H16 | 0.5-4.5 | 180 | 170 | 5.2 |
| H18 | 0.5-3.0 | 210 | 180 | 4.5 |
The chemical composition of 3003 aluminum plate sheet is shown in the table below. The values are given as percentages of the total weight of the alloy.
| Element | Present |
| Si | <= 0.60 % |
| Fe | <= 0.70 % |
| Cu | 0.050 – 0.20 % |
| Mn | 1.0 – 1.5 % |
| Zn | <= 0.10 % |
| Al | 96.7 – 98.5 % |
The strength of 3003 aluminum sheet is measured by its tensile strength and yield strength. Tensile strength is the maximum stress that a material can withstand while being stretched or pulled before breaking. Yield strength is the stress that a material can withstand without permanent deformation. The strength of 3003 aluminum sheet depends on the temper, or the degree of cold work, applied to the material. The higher the temper, the higher the strength, but the lower the ductility. The strength of 3003 aluminum sheet can range from 110 MPa to 200 MPa in tensile strength, and from 40 MPa to 185 MPa in yield strength, depending on the temper.
Here is a table that summarizes some of the specifications of 3003 Aluminum Sheet Plate:
| Property | Value |
| Width | 1,000 mm to 2,500 mm |
| Length | 2,000 mm to 6,000 mm |
| Thickness | 0.2 mm to 6 mm |
| Tensile Strength | 110 to 240 MPa(16 to 34 x 103 psi) |
| Yield Strength | 40 to 210 MPa(5.7 to 30 x 103 psi) |
| Elongation at Break | 1.1 to 28 % |
| Density | 2.8 g/cm3 (0.098 lb/in3) |
| Melting Point | 643 – 654 °C(1190 – 1210 °F) |
Surface processing of 3003 aluminum sheet & plate can include mechanical and organic finishes, such as polishing, embossing, brushing, anodizing, painting, or coating. These finishes can improve the appearance, durability, and performance of the aluminum product. However, some finishes may affect the mechanical properties or corrosion resistance of the alloy, so they should be chosen carefully depending on the application and environment.
3003 Embossed aluminum sheet & plate is an aluminum sheet with a raised pattern on the surface. Some commonly used patterns are orange peel, rhombus, rhombus or square, also known as stucco or tread plate.
3003 embossed aluminum sheet & plate is often used for decorative, architectural, and industrial applications, such as cooking utensils, trim, awnings, siding, storage tanks, chemical equipment, staircases, wall art, signage, and more. It has a unique and attractive appearance, as well as enhanced rigidity and strength. The embossed pattern can also provide anti-slip and anti-skid properties, as well as reduce the contact area with corrosive substances.
3003 Aluminium Sheet Plate is a type of aluminium alloy with manganese as its primary alloying element. It has good formability, corrosion resistance, and cost-effectiveness. It is widely used in various industries and applications, such as:
Some of the advantages of 3003 aluminum plate are:
Here is a table that summarizes the main properties and characteristics of 3003, 6061, 3004, and 5052 aluminum:
| Property | 3003 Aluminum | 6061 Aluminum | 3004 Aluminum | 5052 Aluminum |
| Alloy Composition | Al-Mn-Cu | Al-Mg-Si-Cu-Cr | Al-Mn-Mg | Al-Mg-Cr-Zn |
| Strength | Low to moderate | High | Moderate | High |
| Hardness | Low | High | Moderate | High |
| Formability | Excellent | Average | Excellent | Average |
| Weldability | Excellent | Excellent | Good | Good |
| Corrosion Resistance | Good | Good | Excellent | Excellent |
| Heat Treatment | Non-heat-treatable | Heat-treatable | Non-heat-treatable | Non-heat-treatable |
| Common Applications | Cooking utensils, food packaging, heat exchangers, sheet metal work | Aerospace components, automotive parts, structural components, bike frames, marine applications | Beverage cans, lamp covers, storage tanks, building materials | Marine applications, fuel tanks, truck bodies, electronic |
Introduction: At Huasheng Al……
Introduction Aluminium alloy……
Introduction 1070 Aluminium ……
Introduction to 3004 Alumini……
Introduction Welcome to Huas……
Introduction At Huasheng Alu……
Henan Huasheng Aluminum Co., Ltd (HHALU for short), established in 2001, is located in Huiguo Town, the famous Aluminum capital of Henan Province, It's a professional manufacturer and engages in the research, development, production, sales and service of aluminum sheet plate, aluminum coil, aluminum foil, aluminum strip and aluminum circle.
In addition, HHALU also sell aluminum plate for construction and ships, aluminum mirror plate, and automotive aluminum alloy plate.
No.53, Dongming Road, Zhengzhou, Henan, China
Copyright © Huasheng Aluminum 2023. All rights reserved.
