Application of 3105 Aluminium foil

3105 Aluminium foil

2024-03-27 09:04:08

Common thickness	7um, 8um, 9um, 10um, 11um, 15um, 20um, 25um, etc.
Tempers	O, H14, H18
Width	up to 1.5m
Length	costomized

3105 Aluminium foil chemical composition

Element	Content (%)
Aluminium (Al)	<= 95.9 %
Chromium (Cr)	<= 0.20
Copper (Cu)	<= 0.30
Iron (Fe)	<= 0.70
Magnesium (Mg)	0.20 – 0.80
Manganese (Mn)	0.30 – 0.80
Silicon (Si)	<= 0.60
Titanium (Ti)	<= 0.10
Zinc (Zn)	<= 0.40
Other, each	<= 0.05
Other, total	<= 0.15

3105 Aluminium foil thickness and specifications

Thickness Range

The thickness of Aluminium foil is typically measured in micrometers (µm) or in thousandths of an inch (mil). For 3105 Aluminium foil, common thicknesses can range from:

6 µm (0.006 mm or 0.24 mil) for very light-duty applications
10 µm (0.01 mm or 0.39 mil) for general-purpose use
15 µm (0.015 mm or 0.59 mil) for medium-duty applications
20 µm (0.02 mm or 0.79 mil) and above for heavier-duty use

Width and Length

The width and length of 3105 Aluminium foil rolls can vary greatly depending on the manufacturer and the specific application. Common widths range from a few centimeters to over a meter wide, and the length of the roll can extend up to several hundred meters or more.

Tempers

Aluminium foil can be produced in different tempers, which refer to the level of hardness and strength achieved through various heat treatments. For 3105 Aluminium foil, common tempers include:

O (Annealed): The softest temper, offering the best formability.
H14: A strain-hardened temper with moderate hardness and strength.
H18: A harder temper with increased strength compared to H14.

Application of 3105 Aluminium foil

The 3105 Aluminium alloy, known for its excellent formability, moderate strength, and good corrosion resistance, is used in a variety of applications across different industries. Here’s a detailed look at how 3105 Aluminium foil is utilized in each of the mentioned areas:

Heat Exchangers and HVAC Applications

Use Case	Description
Heat Exchanger Cores	3105 Aluminium foil is used in the manufacturing of heat exchanger cores due to its excellent thermal conductivity, which is crucial for efficient heat transfer between fluids.
HVAC Ducts	The foil’s resistance to corrosion makes it ideal for creating ductwork in heating, ventilation, and air conditioning (HVAC) systems, where it helps to maintain air quality and system longevity.

3105 aluminum foil for Heat Exchanger Cores

3105 Packaging Aluminium Foil

Use Case	Description
Food Packaging	The foil’s barrier properties make it suitable for packaging food products, preserving freshness and preventing contamination.
Pharmaceutical Packaging	Used for blister packs and vials, the foil ensures the protection and controlled release of pharmaceuticals.
Industrial Packaging	For packaging sensitive electronic components or other items that require a moisture and oxygen barrier, 3105 foil is an excellent choice.

aluminum foil for Pharmaceutical Packaging

Building Applications

Use Case	Description
Insulation	The foil’s thermal properties make it a good insulating material for building construction, helping to reduce energy consumption and improve indoor comfort.
Flashing	In roofing and other building envelope applications, 3105 Aluminium foil can be used as flashing to prevent water infiltration.
Decorative Cladding	Its durability and ease of forming make it suitable for decorative cladding on building exteriors.

3105 Aluminium Foil for Automobiles

Use Case	Description
Radiator Cores	The high thermal conductivity of 3105 Aluminium foil is utilized in the construction of radiator cores for cooling automotive engines.
Body Panels	In some car models, especially vintage or custom vehicles, 3105 Aluminium foil may be used for lightweight body panels.
Electrical Components	The foil’s good electrical conductivity and resistance to corrosion protect sensitive wiring and electrical components within the vehicle.

3105 Decorative Aluminium Foil

Use Case	Description
Architectural Features	The foil can be used to create decorative architectural elements, such as wall coverings or ceiling features, due to its malleability and aesthetic appeal.
Automotive Trim	Used for decorative trim on vehicles, 3105 Aluminium foil can be shaped into intricate designs and finishes.
Home Decor	For decorative purposes in home interiors, such as backsplashes or custom furniture accents, 3105 foil offers a durable and modern look.

Comparison with other types of Aluminium foil

When comparing 3105 Aluminium foil with other types of Aluminium foil, it’s essential to consider the alloy composition, thickness, temper, and intended application. Here’s a comparative overview focusing on some common Aluminium alloy grades used for foil applications:

1000 Series (Pure Aluminium)

Attribute	3105 Aluminium Foil	1050 Aluminium Foil
Alloy Composition	Mg and Mn in Al matrix	Pure Al (99.5% min)
Strength	Moderate	Low
Formability	Good	Excellent
Corrosion Resistance	Good	Very Good
Typical Thickness	0.006 mm to 0.2 mm	0.05 mm to 0.2 mm
Common Applications	Packaging, HVAC, automotive	Electrical, food service, general packaging

2000 Series (Copper-Aluminium Alloys)

Attribute	3105 Aluminium Foil	2024 Aluminium Foil
Alloy Composition	Mg and Mn in Al matrix	Cu in Al matrix
Strength	Moderate	High
Formability	Good	Moderate
Corrosion Resistance	Good	Fair
Typical Thickness	0.006 mm to 0.2 mm	0.1 mm to 0.3 mm (and thicker for some applications)
Common Applications	Packaging, HVAC, automotive	Aerospace, heavy-duty structures

5000 Series (Magnesium-Aluminium Alloys)

Attribute	3105 Aluminium Foil	5052 Aluminium Foil
Alloy Composition	Mg and Mn in Al matrix	Mg in Al matrix
Strength	Moderate	Moderate to High
Formability	Good	Good
Corrosion Resistance	Good	Excellent (especially in marine environments)
Typical Thickness	0.006 mm to 0.2 mm	0.1 mm to 0.5 mm (and thicker for some applications)
Common Applications	Packaging, HVAC, automotive	Marine, transportation, structural applications

6000 Series (Silicon-Magnesium Alloys)

Attribute	3105 Aluminium Foil	6061 Aluminium Foil
Alloy Composition	Mg and Mn in Al matrix	Si and Mg in Al matrix
Strength	Moderate	Moderate to High
Formability	Good	Good
Corrosion Resistance	Good	Good (especially in anodized form)
Typical Thickness	0.006 mm to 0.2 mm	0.1 mm to 1 mm (and thicker for some applications)
Common Applications	Packaging, HVAC, automotive	Architectural, structural, automotive parts

8000 Series (Other Elements)

Attribute	3105 Aluminium Foil	8011 Aluminium Foil
Alloy Composition	Mg and Mn in Al matrix	Various elements in Al matrix
Strength	Moderate	Varies (depending on specific alloy)
Formability	Good	Varies
Corrosion Resistance	Good	Varies
Typical Thickness	0.006 mm to 0.2 mm	Varies
Common Applications	Packaging, HVAC, automotive	Specialized industrial applications

It’s important to note that the specific properties and applications of Aluminium foil can be further modified through various heat treatments and manufacturing processes. The choice of Aluminium foil depends on the balance of properties required for a particular application, as well as cost considerations.

Aluminium foil is a thin, flexible sheet of metal that has many uses in various industries and homes. Some of the most common applications of aluminium foil are:

Food packaging:

aluminium foil protects food from moisture, light and oxygen, maintaining its freshness and flavor. It can also be used for baking, toasting, grilling and reheating food.

Application of aluminium foil in food packaging

Household:

aluminium foil can be used for a variety of household tasks such as cleaning, polishing and storage. It can also be used for crafts, art, and science projects.

Household Foil and Domestic Uses

Pharmaceuticals:

aluminium foil can provide a barrier to bacteria, moisture and oxygen, ensuring the safety and effectiveness of medicines and pharmaceuticals. It is also available in blister packs, bags and tubes.

Pharmaceutical aluminum foil

Electronics:

aluminium foil is used for insulation, cables and circuit boards. It also acts as a shield against electromagnetic interference and radio frequency interference.

Aluminum foil used in insulation and cable wrapping

Insulation:

aluminium foil is an excellent insulator and is often used to insulate buildings, pipes and wires. It reflects heat and light, helping to regulate temperature and save energy.

Alufoil for Heat Exchangers

Cosmetics:

aluminium foil can be used for packaging creams, lotions and perfumes, as well as for decorative purposes such as manicures and hair coloring.

Alufoil for Cosmetics and Personal Care

Crafts and DIY Projects:

aluminium foil can be used in a variety of crafts and DIY projects, such as making ornaments, sculptures, and decorative ornaments. It is easy to shape and shape, making it a versatile material suitable for creative activities.

Artificial Intelligence (AI) Training:

In more high-tech applications, aluminium foil has been used as a tool to create adversarial examples to fool image recognition systems. By strategically placing foil on objects, researchers have been able to manipulate how artificial intelligence systems perceive them, highlighting potential vulnerabilities in these systems.

These are just a few examples of the many applications of aluminium foil in various industries and in daily life. Its versatility, low cost and effectiveness make it a widely used material around the world. In addition, aluminium foil is a recyclable and environmentally friendly material that reduces waste and saves energy.

Customization service for width, thickness and length

Huasheng aluminum can produce aluminium foil jumbo rolls with standardized outer diameters and widths. However, these rolls can be customized to a certain extent according to the customer’s requirements, especially in terms of thickness, length and sometimes even width.

Quality Assurance:

As a professional aluminum foil manufacturer, Huasheng Aluminum will frequently conduct quality inspections in all production links to ensure that the original aluminum foil rolls meet the prescribed standards and customer requirements. This may involve inspection of defects, thickness consistency and overall product quality.

Wrapping:

The jumbo rolls are often wrapped tightly with protective materials such as plastic film or paper to shield them from dust, dirt, and moisture.

Then,it is placed on a wooden pallet and secured with metal straps and corner protectors.

Afterwards, the aluminium foil jumbo roll is covered with a plastic cover or a wooden case to prevent damage during transportation.

The aluminium foil jumbo roll is placed on a wooden pallet

The wooden case packaging of aluminium foil jumbo roll

Labeling and Documentation:

Each package of aluminium foil jumbo rolls typically includes labeling and documentation for identification and tracking purposes. This may include:

Product Information: Labels indicating the type of aluminum foil, thickness, dimensions, and other relevant specifications.

Batch or Lot Numbers: Identification numbers or codes that allow for traceability and quality control.

Safety Data Sheets (SDS): Documentation detailing safety information, handling instructions, and potential hazards associated with the product.

Shipping:

Aluminum foil jumbo rolls are typically transported via various modes of transportation, including trucks, railroads, or ocean freight containers, and the ocean freight containers are the most common mode of transportation in international trade.depending on the distance and destination. During shipping, factors such as temperature, humidity, and handling practices are monitored to prevent any damage to the product.