Introducción u 1100 Ch'íin u aluminio
Leti'e' 1100 Le tira aluminio le jump'éel xooko'obo' jach versátil k'ajóolta'an tumen u excelente conformabilidad yéetel ka'anal resistencia ti' le corrosión. It’s a commercially pure aluminium alloy with a minimum purity of 99.00%, which makes it ideal for applications requiring good forming characteristics and corrosion resistance. Here are some key points about the 1100 Ch'íin u aluminio:
- Composition: It contains a minimum of 99.00% aluminium with small amounts of other elements to enhance its properties.
- Conformabilidad: This alloy is known for its excellent formability, particularly in the fully soft, annealed temper. It’s suitable for bending, hilado, boonol, pateadura, and roll forming.
- Conductividad térmica: With good thermal conductivity, it’s often used in heat exchangers and as heat sinks in electrical applications.
- Resistencia le corrosión: Its excellent corrosion resistance makes it suitable for use in various environments.
- Aplicaciones: Leti'e' 1100 aluminium strip is used in a wide range of industry applications, including electrical components, construction materials, and cooking utensils.
It’s also characterized by its low density and strong conductivity, further broadening its range of applications. Whether in industrial settings or everyday products, le 1100 aluminium strip plays a crucial role due to its beneficial properties.
1100 Aluminium Strip Common Temper
The common tempers for 1100 aluminum strip and their typical applications can be summarized in the following table:
Atemperar |
Descripción |
Aplicaciones |
O |
Recocido, soft |
Nu'ukulo'ob químicos, Meyajo'ob chapa metálica |
H12 |
Strain-hardened, 1/4 hard |
Spinning, hollowware |
H14 |
Strain-hardened, 1/2 hard |
Víveres & chemical handling equipment |
H16 |
Strain-hardened, 3/4 hard |
Spinning, hollowware |
H18 |
Strain-hardened, full hard |
Placas, Reflectores |
H19 |
Strain-hardened, extra hard |
Conductores eléctricos |
Le composición química ti' 1100 aluminum alloy is primarily pure aluminum with small additions of other elements to enhance its properties. Here’s a table summarizing the composition:
Elemento |
Contenido (%) |
Aluminio (Ti' le) |
99.00 (min) |
Cobre (Cu) |
0.05-0.20 |
Silicio (Wa) + Hierro (Fe) |
0.95 (k'aas) |
Manganeso (Mn) |
0.05 (k'aas) |
Zinc (Zn) |
0.10 (k'aas) |
Beryllium, Be |
<= 0.0008 |
Láak'o'ob (Each) |
0.05 (k'aas) |
Láak'o'ob (Total) |
0.15 (k'aas) |
This composition makes the 1100 aluminum strip highly ductile and formable, suitable for applications requiring bending, hilado, boonol, pateadura, and roll forming.
1100 Aluminium strip mechanical properties
here’s a table summarizing the typical mechanical properties of 1100 aluminum strip in various temper conditions:
Temper Condition |
Resistencia le tracción (Mpa) |
Límite elástico (Mpa) |
Alargamiento (%) |
Dureza (Brinell) |
O (Recocido) |
86.9 |
34.5 Mpa |
15 – 28 % |
23 HB |
H12 |
110 |
95.0 – 130 Mpa |
3.0 – 12 % |
28 HB |
H14 |
110 – 145 Mpa |
>= 95.0 Mpa |
1.0 – 10 % |
32 HB |
H16 |
130 – 165 Mpa |
>= 115 Mpa |
1.0 – 4.0 % |
38 HB |
H18 |
>= 150 Mpa |
150 MP |
1.0 – 4.0 % |
44 HB |
Páaybe'en:
- The values provided are approximate and may vary depending on specific manufacturing processes and conditions.
- Tensile strength is the maximum stress a material can withstand while being stretched or pulled before necking or fracture occurs.
- Yield strength is the stress at which a material begins to deform plastically without undergoing significant permanent deformation.
- Elongation is the percentage increase in length of a material when subjected to tensile loading before fracture occurs.
- Dureza (Brinell) is a measure of a material’s resistance to indentation or abrasion.
These mechanical properties give an overview of how 1100 aluminum strip behaves under different temper conditions, ranging from the soft and ductile annealed state (O temper) to the stronger but less formable strain-hardened conditions (H12, H14, H16, H18). These properties are crucial considerations in determining the suitability of 1100 aluminum strip for various applications in industries such as electrical, automotor, construcción, ka embalaje.
1100 Aluminium Strip Common Specifications
It’s important to consult with the supplier or manufacturer to get precise specifications tailored to your needs when sourcing 1100 aluminum strip.
Especificación |
Range/Options |
Espesor |
0.15 mm u 4.0 milímetro (0.006 inches to 0.157 Pulgadas) |
|
Common thicknesses: 0.2 milímetro, 0.25 milímetro, 0.3 milímetro, 0.4 milímetro, |
|
0.5 milímetro, 0.6 milímetro, 0.8 milímetro, 1.0 milímetro, 1.2 milímetro, 1.5 milímetro, 2.0 milímetro, |
|
2.5 milímetro, 3.0 milímetro, 4.0 milímetro |
Kóoch |
20 mm u 1500 milímetro (0.79 inches to 59.06 Pulgadas) |
|
Common widths: 100 milímetro, 150 milímetro, 200 milímetro, 250 milímetro, 300 milímetro, |
|
400 milímetro, 500 milímetro, 600 milímetro, 800 milímetro, 1000 milímetro, 1200 milímetro, |
|
1250 milímetro, 1500 milímetro |
Largura |
Coil length: Typically in coils with standard lengths |
|
Custom lengths available based on coil or sheet needs |
Atemperar |
O (Recocido), H12, H14, H16, H18, etc. |
Acabado superficial |
Acabado molino (uncoated), Bright finish, Anodized finish |
|
Painted finish (with protective coatings) |
Standards |
ASTM B209/B209M, AMS-QQ-A-250/1, TI' 573-3, etc. |
Embalaje |
Coils or on wooden pallets, Wrapped with protective |
|
packaging materials (plastic film or paper), Custom |
|
packaging available based on needs |
1100 Aluminium strip surface treatment and quality
Estándar
Propiedad |
Detalles |
Material |
1100 aluminum strip, made of pure aluminum |
Estándar |
ASTM B209 |
Specifications |
Specifies chemical composition, Propiedades mecánicas, dimensional deviation, surface quality, and other requirements |
Surface Treatments of 1100 Ch'íin u aluminio
Treatment Type |
Tuukula' |
Yáantajo'ob |
Anodizado |
Electrochemical reaction forms a durable oxide layer. |
Improved corrosion resistance, decorative finish, available in various colors. |
Cepillado |
Mechanical drawing process using abrasives. |
Smooth or matte finish, hides scratches, decorativo. |
With Holes (Perforated) |
Perforation process punches holes into the strip. |
Customizable pattern, Buka'aj, spacing; used for ventilation, filtration, or decoration. |
Pulido |
Polishing process with abrasives and compounds. |
Reflective and glossy appearance, suitable for decorative applications. |
Recubrimiento tu lu'umil |
Electrostatic application of powder coating, cured under heat. |
Duradero, uniform surface, available in various colors, enhances corrosion resistance. |
1100 Aluminum Strip Common Applications
Ka'anatako'ob |
Óoltaj búukinta'al |
Beneficios |
Transformer |
Winding material in coil construction. |
Electrical conductivity, good formability, thermal conductivity. |
Capacitor Casing |
Raw material for shells. |
Moderate tensile strength, high elongation, low ear rate, good mechanical properties. |
Intercambiadores ooxoj |
Manufacturing of fins and tubes. |
Good thermal conductivity, suitable for air conditioning and refrigeration. |
Edificación ka Construcción |
Techos, revestimiento, architectural elements. |
Resistencia le corrosión, Conformabilidad, ideal for outdoor use. |
Industria Automotriz |
Heat shields, molduras decorativas, Paneles le carrocería. |
Peso ligero, contributes to improved fuel efficiency. |
Embalaje |
Production of foil containers, lids. |
Conformabilidad, Resistencia le corrosión, suitable for packaging. |
Reflectors and Lighting |
Production of reflectors for lighting fixtures. |
High reflectivity, preferred for surfaces requiring reflection. |