| Espesor (milímetro) | 0.2 – 6 |
| Kóoch (milímetro) | 500 – 2800 |
| Largura (milímetro) | 1000 – 12000 |
| Opciones ti' meyajo'ob | Acabado molino, Pulido, Cepillado, etc. |
3004 Aluminium is an alloy known for its excellent strength, Conformabilidad, ka resistencia u corrosión. It is widely used in various industries due to these properties and its versatility in different applications.
3004 Aluminium typically contains about 1% manganese and 1% magnesio, enhancing its strength and corrosion resistance. It is stronger than 3003 alloy but has lower ductility.
| Elemento | Rango porcentual |
| Aluminio | 95.5-98.2% |
| Magnesio (Mg) | 0.8-1.3% |
| Manganeso (Mn) | 1.0-1.5% |
| Cromo (Cr) | 0.05-0.25% |
| Hierro (Fe) | k'aas 0.7% |
| Silicio (Wa) | k'aas 0.3% |
| Cobre (Cu) | k'aas 0.25% |
| Zinc (Zn) | k'aas 0.25% |
| Titanio (Teechi') | k'aas 0.15% |
| La elementos | k'aas 0.05% |
| Temper Designations | Descriptions |
| H19 | Strain hardened and partially annealed |
| H18 | Strain hardened and fully annealed |
| O | Noj recocido |
Dimensions Table
| Espesor (milímetro) | Kóoch (milímetro) | Largura (milímetro) | Opciones ti' meyajo'ob |
| 0.2 – 6 | 500 – 2800 | 1000 – 12000 | Acabado molino, Pulido, Cepillado, etc. |
| Buka'aj (Imperial) | Buka'aj (Métrico) |
| 4×8 | 1000 x 2000mm |
| 4×10 | 1250mm x 2500mm |
| 48×96 | 1220×2440 |
| … | … |
3004 Aluminium Sheet Plate is used in:
3004 Aluminio is ideal for beverage cans due to its high strength, Conformabilidad, and recyclability.
Can Packaging Advantages Table
| Ventajas | Descripción |
| Ka'anal resistencia | Durability in can production |
| High Extension | Formability for complex shapes |
| Reciclabilidad | Environmentally friendly |
3004 Placa chapa aluminio is used in exterior decoration due to its strength and corrosion resistance.
Used in manufacturing parts that require both strength and resistance to corrosion.
| Propiedad | Ku |
| Densidad | 2.72 g leti' cm³(0.0983 lb leti' in³) |
| Resistencia le tracción | >= 160 MPa @Thickness 6.35 – 76.2 milímetro |
| Límite elástico | >= 62.0 MPa @Thickness 6.35 – 76.2 milímetro |
| Xook elasticidad | 70 GPa |
| Ratio u Poisson | <= 0.35 |
| Alargamiento le rotura | 7.0 % @Thickness 6.35 – 76.2 milímetro |
Páaybe'en: data source.
Composition and Properties Comparison Table
| Característica | 3004 Aluminio | 3003 Aluminio |
| Composición (Mn%) | 1.0 – 1.5 | 1.0 – 1.5 |
| Composición (Mg%) | 0.8 – 1.3 | – |
| Conformabilidad | Slightly better | Ma'alob moldeable |
| Resistencia le corrosión | Better in salt water | Ma'alob |
| Muuk' | Higher | Lower |
3004 Aluminium is hot rolled, ka' jo'op 3003 can be cast and hot rolled. 3004 is used for beverage cans, Fachadas kúuchilo'ob, and storage tanks, ka' jo'op' u 3003 is used for cookers, Intercambiadores ooxoj, and roof panels.
Introduction In the world of……
8011 H18 blister aluminum fo……
Introducción u 1050 Epoxy C……
1. Introducción 8011 Embosse……
1. Introducción u 3003 Alumbre......
Introduction Coated Aluminum……
Henan Huasheng Aluminio Co., Ltd (HHALU utia'al u abreviar), establecida ti' 2001, Kula'an tu kaajil Huiguo, le famosa capital u aluminio u provincia u Henan, Leti' jump'éel fabricante ku yéetel ku meentik le investigación, ma'alo'ob, producción, sales and service of aluminio sheet plate, bobina aluminio, ju'un aluminio, Ch'íin aluminio yéetel wóoliso' aluminio.
Beey xan, HHALU xan ku placas aluminio yo'osal le construcción yéetel le chéem, placa néeno' aluminio, ka placa aleación aluminio automotriz.
No.53, Bejo' u Dongming, Zhengzhou, Henan, China
P'iskambal autor © Huasheng Aluminium 2025. Tuláakal le p'iskambal reservados.
