8011-H18 Aluminum Foil don Marufi na Pharmaceutical kayan marufi ne na farko da aka karɓa don rufe blister, jakar jakar leda, da laminated tsare-tsaren da aka yi amfani da su a cikin masana'antar harhada magunguna.
A cikin H18 (cike da wuya) fushi, wannan gami yana ba da babban juriya da huda, kyakkyawan kwanciyar hankali mai girma akan layin marufi mai sauri, da kuma ainihin shingen da ba zai iya jurewa ba ga oxygen, tururin ruwa, da haske-maɓalli masu mahimmanci don kare kwanciyar hankali na miyagun ƙwayoyi da tsawaita rayuwar shiryayye.
Gabaɗaya, 8011-H18 aluminum foil yana wakiltar daidaitaccen bayani wanda ya haɗa aikin shinge mai ƙarfi, inji dogara, da karbuwar tsari, sanya shi zaɓin da aka fi so don masana'antun da ke neman abin dogaro, m, da fakitin magunguna masu dacewa a cikin kewayon ƙwaƙƙwaran sifofi masu ƙarfi..
8011-H18 Aluminum Foil
8011-H18 shi ne na'ura mai juzu'i mai birgima 8000-jerin aluminum foil gami, kawota a cikin cikakken aikin sanyi H18 (cike da wuya) fushi, injiniyoyi don juyar da magunguna masu saurin gaske (kumburin kumburi, rufaffiyar jakar buhu da laminated foil) inda ake buƙatar shingen ƙarfe mai ci gaba da tsayi mai tsayi / tsayin daka a ma'auni na bakin ciki sosai.
Huasheng Aluminum Ma'aunin Kauri
| Abun ciki | Na yau da kullun (wt %) | Aiki / sharhi |
|---|---|---|
| Aluminum (Al) | Ma'auni (~ ≥ 98.0 %) | Matrix mai girma - yana ba da shinge da tsari. |
| Iron (Fe) | 0.50 - 1.2 | Najasa gama gari daga mirgina gami; sarrafawa don ingancin tsare. |
| Siliki (Kuma) | 0.20 - 0.80 | Rashin tsarki; yana rinjayar halayen motsi da injiniyoyi. |
| Manganese (Mn) | 0.05 - 0.30 | Ƙananan ƙari don sarrafa hatsi da kwanciyar hankali. |
| Magnesium (Mg) | ≤ 0.10 | Yawanci ƙasa sosai 8011 (sabanin 5xxx alloys). |
| Copper (Ku) / Zinc (Zn) | Trafi (≤ 0.10) | Adana kaɗan don adana lalata da kaddarorin shinge. |
| Titanium (Na), wasu | Trafi | Sarrafa don kula da fuskar bangon waya da daidaiton inji. |
Bayani mai amfani: 8011 an ƙera shi ya zama gaɓa mai ƙarancin ƙazanta; Madaidaicin iyakoki sun dogara ne akan injin niƙa da ƙayyadaddun samfur. Don amfani da magunguna, na buƙatar cikakken rahoton farko akan CoA.
Don ma'aunin ma'aunin foil mai kauri, ana yin daidaitattun gwaje-gwajen tensile/samar da ake yi akan samfuran tsiri/coupon.; Halin inji yana da ƙarfi ta hanyar ma'auni da tarihin birgima.
| Dukiya | Na yau da kullun / misali |
|---|---|
| Estimate tenerile ƙarfi (UTS) | ~ 180 - 260 MPa (mafi girma dabi'u don bakin ciki, foil mai nauyi mai nauyi) |
| Yawan amfanin ƙasa (idan aka ruwaito) | Yawanci mai girma; a yawancin lokuta masu samar da foil suna ba da rahoton "ƙarfin hujja" ko dogara ga UTS & elongation data |
| Tsawaitawa (A) | 0.5 - 3 % (H18 yana da wuyar gaske - ƙananan ductility) |
| Yaga / juriya na tattarawa | Good - muhimmanci mafi girma fiye da taushi fushi a daidai ma'auni |
| Tauri | Ba a saba amfani da shi ba don karɓar foil, amma cikakkun foils masu ƙarfi suna nuna haɓakar microhardness vs foil annealed |
Ma'anar aikin injiniya: H18 foil yana da ƙarfi kuma yana tsayayya da samuwar pinhole yayin juyawa da cikawa, amma ba za a iya zana mai zurfi ba - an inganta shi don rufewa (lebur rufin asiri) maimakon kafa cikin cavities.
| Dukiya | Na hankula darajar / bayanin kula |
|---|---|
| Yawan yawa | ≈ 2.70 garwa⁻³ (daidai da aluminium gabaɗaya) |
| Ƙarfafawar thermal (kusan) | ~ 230 - 240 W·m⁻¹·K⁻¹ (babban adadin aluminum) |
| Musamman zafi | ~ 880 - 900 J·k⁻¹·K⁻¹ |
| Ma'auni (kauri) - al'ada ga pharma lidding | ~20 - 40 µm (20-25µm na kowa don rufin rufin rufin; ma'auni masu kauri da aka yi amfani da su don ƙarin juriya na huda ko lamination mai sanyi) |
| Ƙarshen saman | Mill gama, matt ko mai haske dangane da mirgina da aikin anneal; lacquered don sealability da bugu |
Lura: haƙuri mai kauri, Ƙunƙarar saman ƙasa da ƙasƙanci suna da mahimmanci ga injunan blister - ƙididdige bayanan kauri na kowane-reel kuma an ba da izinin waje-na-gida..
Aluminum foil yana samar da gaske m karfe shãmaki.
Ana ƙididdige aikin ta hanyar amincin foil (rashi ramuka), lacquer / laminate tsarin da lahani.
Sachets don Magunguna
8011-H18 foil ne mai aikin doki don marufi na farko na magunguna saboda yana haɗa shingen ƙarfe na gaske wanda ba zai iya jurewa ba tare da juriya mai tsayi / tsagewa a ma'aunin sirara da kwanciyar hankali na yanar gizo akan layukan juyawa mai sauri..
8011-H18 Aluminum Foil don Marufi
Push-ta hanyar blisters na buƙatar abin rufewa wanda zai kasance cikakke yayin cikawa / sarrafawa amma ba da izinin majiyyaci ya tura kwamfutar hannu ba tare da yaga laminate ba tare da tabbas ba..
8011-H18 sau da yawa shine murfin rufewa na zaɓi saboda H18 babban ƙarfin aikin sanyi yana rage haɗarin pinhole kuma yana tsayayya da huda ta kayan aiki., gefuna kwamfutar hannu da damuwa na sufuri.
Gine-gine na al'ada & ma'auni
Shafi da hatimi dubawa
Heat-hatimin lacquer (Pvdc, acrylic, ko na musamman pharma lacquers) Ana amfani da foil don ba da damar hatimin hermetic zuwa kafa gidan yanar gizo (PVC, PVC/PVdC, PVdC masu rufin fina-finai).
Nauyin gashi yawanci ya tashi daga 1-6 g/m² dangane da sinadarai na lacquer da ƙarfin hatimi da ake buƙata.
Aluminum Foil Strip Packaging
Marufi na tsiri yana nufin ci gaba da ɗigon ramuka na blister da murfi waɗanda za a iya amfani da su a cikin tsarin rarraba kashi ɗaya ko kuma inda aka tattara allurai da yawa a cikin rukunin ci gaba..
Zaɓuɓɓukan injiniya
"Alu-Alu” (foil mai sanyi) kullum yana nufin gine-ginen bangon aluminum mai Layer Layer da aka yi amfani da su azaman yanar gizo da kuma matsayin rufi a cikin cikakken aluminum (foil / foil) fakitin blister.
Ana samar da foils masu sanyi na gaskiya tare da alloys da zafin zafin da aka zaɓa don high ductility don ba da izinin zane mai zurfi cikin cavities (misali, gami mai laushi ko taushin zafin rai fiye da H18).
Fakitin Alu-Alu na yau da kullun na iya samun yadudduka na aluminium guda biyu waɗanda aka haɗe tare da yadudduka na lilin.
Inda 8011-H18 ke
Cold-Form 8011-H18 Aluminum Foil
Jakunkuna na kashi-kashi don foda, granular kwayoyi, semisolids da Topical shirye-shirye. Ana iya amfani da foil azaman rufin rufi kai tsaye ko azaman babban shingen shinge a cikin laminates.
Gine-ginen laminate gama gari
Rubutun da ke rufe bakin kwalbar (dunƙule iyakoki, kwalaben dropper) da buɗaɗɗen kwantena don nuna shaida mara kyau da adana sabo.
Waɗannan na kowa ne don abubuwan gina jiki da wasu kwantena na ruwa/semissolid na magunguna.
Zaɓuɓɓukan injiniya
Tsarin masana'anta ya ƙware sosai don saduwa da buƙatun magunguna:
1. Simintin gyare-gyare da Zafafan Girgizawa: The 8011 Ana jefa gawa a cikin ingots kuma ana jujjuya zafi zuwa cikin kauri mai kauri.
2. Cold Rolling: Kayan yana maimaita sanyi-birgima don cimma ma'aunin bakin ciki na ƙarshe (yawanci 20𝜇m zuwa 40 𝜇m ).
3. Annealing da fushi: An rufe foil ɗin zuwa zafin da ake so (H18) ta hanyar sarrafa sanyi aikin.
4. Maganin Sama: Rubutun yana jurewa da tsaftacewa don tabbatar da saman matakin magunguna.
5. Tufafi: Ana amfani da lacquer mai zafi mai zafi a gefe ɗaya, kuma ana amfani da lacquer mai kariya / bugu zuwa ɗayan gefen don bugawa.
6. Slitting da Ingantattun Dubawa: An tsaga foil ɗin da aka gama zuwa ƙayyadaddun abokin ciniki kuma an yi shi da ƙaƙƙarfan fitintinu da ingancin cak.
Fitar da marufi don manyan rolls na foil aluminum
Dole ne kayan marufi na magunguna su bi tsauraran ƙa'idodin ƙasa da ƙasa don tabbatar da amincin haƙuri da ingancin magunguna.
•FDA (U.S. Gudanar da abinci da magani): Yana buƙatar kayan don zama lafiya don hulɗa kai tsaye da kwayoyi.
•USP (Amurka Pharmacopeia) ⟨662⟩: Yana ba da ma'auni don abubuwan haɗin marufi na ƙarfe, gami da gwaje-gwajen aiki.
• EP (Turai Pharmacopoeia): Yana saita ƙa'idodi don kayan da ake amfani da su a cikin kwantena na magunguna.
•ISO 15378: Yana ƙayyadad da buƙatu don kayan marufi na farko don samfuran magani, hada da GMP (Kyakkyawar Ƙarfafa Ƙarfafawa).
| Kwatanta abu | 8011-H18 | 8021 / 8079-H18 | 1235-O | Tsarin sanyi | 8011-tushen laminated tsare |
|---|---|---|---|---|---|
| Ma'aunin magunguna na yau da kullun (µm) | 20-40 (20-25 gama gari don PTP) | 20-40 | 20-Way | 40-150 (kafa Layer kauri) | Layer Layer 20-40 (jimlar laminate ya bambanta) |
| Ƙarfin ƙarfi / elongation (buga.) | 180-260 MPA; Elong. <3% | UTS ~ 170-240 MPa; Elong. <3% | UTS ~ 70-140 MPa; Elong. ~ 20-45% | UTS ~ 80-200 MPa; Elong. >15-30% | Ya dogara da laminate; tsare yana ba da rigidity |
| Tsarin tsari | Rufewa kawai; ba zana | Rufewa kawai; ba zana | Yayi kyau sosai | Kyakkyawan ƙarfin nau'in sanyi mai zurfi | Rufewa yana da kyau; forming ya dogara da zane |
| Shamaki ga O₂ / H₂O / haske | Mahimman shingen ƙarfe mara ƙarfi | Mahimmanci mara ƙarfi | Mai yuwuwa | Cikakken shingen karfe-zuwa karfe | Mallake ta Layer Layer (babban shamaki) |
| Gidan teku / shafi dacewa | Yayi kyau tare da pharma lacquers (ingantacce) | Yayi kyau; lacquer tarihin maroki-dogara | Yana buƙatar lacquer don rufewa | Ta hanyar yadudduka na ciki | Madalla; polymer yadudduka tela hatimi / kwasfa |
| Daidaituwar haifuwa | Gamma / E da kyau (lacquer-dogara); autoclave ya dogara da tsarin | Mai kama da 8011 | makamantansu; Dole ne a tabbatar da suturar sutura | Gabaɗaya mai kyau; tabbatar da cikakken laminate | Ya dogara da polymer & tsarin lacquer |
| Aikace-aikacen kantin magani na yau da kullun | PTP blister rufi, jakar jakar leda, foil liners | Madadin blister | Cavities na sanyi, wani murfi | Alu-Alu blisters (kafa + yi kwana) | Sachets, bassuka, jakunkuna |
| Mabuɗin amfani | Babban juriyar huda a ma'aunin bakin ciki; kwanciyar hankali yanar gizo; tabbatar da amfani da pharma | Kwatanta da 8011; sassaucin mai bayarwa | Kyakkyawan ductility; zurfin zana iyawa | Mafi girman shinge + zurfi zana | Haɗa shinge tare da hatimi/bawo & m |
| Mabuɗin iyakoki | Ƙananan ductility; ba don kafawa ba | Makamantan iyaka kamar 8011 | Ƙananan juriya na huda a ma'auni iri ɗaya | Ya fi nauyi, farashi mafi girma, hadaddun juyawa | Sake sarrafa abubuwa; ƙarin aikin tabbatarwa |
8011-H18 Aluminum Foil don Packaging Pharmaceutical lokacin da suke buƙatar shingen ƙarfe da ƙarfin injina a ma'aunin bakin ciki.
Its abũbuwan amfãni - impermeable shãmaki, high huda juriya, kwanciyar hankali mai girma da dacewa don jujjuyawa mai sauri - sanya shi zaɓi na asali don turawa ta hanyar blister lidding da yawancin aikace-aikacen rufewa / laminate.
Don amfani da shi cikin nasara a cikin kantin magani, ƙungiyoyin sayayya dole ne su dage kan takaddun GMP mai kaya, extractables da sterilization data, m kauri da surface bayani dalla-dalla, ingantattun lacquer / fim ɗin haɗin gwiwa da ingantaccen aiki (murfi da ƙarfi, mutunci, haƙuri mai amfani).
Koyaushe cusa takaddun shaida na niƙa da ingantattun rahotanni a cikin kundin tsari don ƙãre kayayyakin.
Q1 - Menene ma'auni na 8011-H18 shine na yau da kullun don rufewar blister na kwamfutar hannu?
Yawancin tura-Layer guda ɗaya ta hanyar ma'auni masu rufewa sune ~ 20-30 µm, tare da 20-25 µm na kowa don yawancin fakitin kashi na baka. Ma'auni masu kauri (30- 40 µm) ana amfani dashi lokacin da ake buƙatar juriya mafi girma ko don aikace-aikacen musamman.
Q2 - Shin 8011-H18 ya dace da blisters mai sanyi?
A'a - H18 cikakke ne kuma bai dace da sanyi mai zurfi ba. Ƙwayoyin blister mai siffar sanyi suna buƙatar laushi, more ductile alloys ko daban-daban fushi. Don rufewa akan blisters masu sanyi, 8011-H18 ya dace a matsayin murfin, amma gidan yanar gizon kafa dole ne a zaɓi daban.
Q3 - Ta yaya haifuwa ke shafar fakitin laminate 8011-H18?
Ƙarfe-ƙarfe yana da ƙarfi a ƙarƙashin gamma da EtO sterilization, amma lacquers, Dole ne a inganta tawada da silinda polymer. Ciwon kai (tururi) na iya yin sulhu da wasu tsarin lacquer/laminate - aiwatar da ƙayyadaddun ingantaccen tsari.
Q4 - Wane takarda zan nema daga mai siyar da foil?
A kalla: takardar shaidar niƙa (sinadaran + mai zafi), lacquer / gashi bayanai fasaha da kuma extractables rahoton, shaida na GMP/ISO15378 ko makamancin haka, da yawan ganowa. Don samfuran da aka tsara, sun haɗa da bayanan dacewa da haifuwa.
Q5 - Ta yaya zan sarrafa ramuka da tabbatar da amincin shinge?
Ƙayyade iyakoki mai karɓuwa, yana buƙatar duba mai zuwa na gani da mutunci (fil-rami ganowa), ba da umarnin duba hangen nesa a cikin aiwatarwa kan canza layukan da kuma tabbatar da kammala fakitin leak/mutunci gwaje-gwaje (misali, gurɓataccen ɓarna, rini ingress inda ya dace).
Henan Huasheng Aluminum Co., Ltd., Ltd (HHALU a takaice), kafa a 2001, yana cikin Garin Huiguo, Shahararren babban birnin Aluminum na lardin Henan, Kwararren masana'anta ne kuma yana yin bincike, ci gaba, samarwa, Talla da sabis na aluminum farantin karfe, karfen aluminum, aluminum foil, aluminum tsiri da aluminum da'ira.
Bugu da kari, Har ila yau, HHALU yana sayar da farantin aluminum don gine-gine da jiragen ruwa, aluminum madubi farantin, da mota aluminum gami farantin.
Na 53, Hanyar Dongming, Zhengzhou, Henan, China
Haƙƙin mallaka © Huasheng Aluminum 2025. An kiyaye duk haƙƙoƙi.
