1. Gabatarwa

5754 aluminium tekin checkered farantin farantin aluminum ne wanda aka tsara daga cikin 5754 gami da kawota a cikin kewayon ma'auni da tsarin tattake (lu'u-lu'u / lozenge, 3-bar, 5-bar, zagaye shugabannin).

Injiniyoyi suna tsara samfurin don sadar da juriya, taurin gida, da karfin gani. Masu amfani da yawa suna amfani da shi zuwa jirgin ruwa da kwale-kwale, Stair ya lalace, shimfidar abin hawa, hanyoyin shiga, hanyoyin masana'antu, da kammala gine-ginen da ke buƙatar juriya na lalata, weldability, da aikin anti-slip.

Wannan labarin yana ba masu ƙira da ƙungiyoyin sayayya masu amfani, bayanan injiniya-daidaitacce: abun da ke ciki da kuma halayen injiniya, lalata yi, masana'anta da sigogin yanayin yanayin, amfani da gazawa, aikace-aikace, da kuma yadda 5754 farantin karfe yana kwatanta da madadin kayan.

5754 Aluminum Tread Checkered Plate

2. Abun da ke ciki da Kaddarorin 5754 Aluminum Alloy

Haɗin Sinadari

The 5754 aluminum gami Aluminum-magnesium alloy ne (5Iyalin XXX). Matsakaicin abun da ke ciki (nauyi %) Ana amfani da su don zaɓi da ƙayyadaddun bayanai a ƙasa.

Ana buƙatar Takaddun Gwajin Mill (MTCs) don ƙimar karɓuwa akan kowane yawa.

Bayanan kula: magnesium shine babban abin ƙarfafawa kuma yana ba da gudummawa ga jurewar ruwan teku. 5754 ya ƙunshi fiye da MG fiye da 3003/1100 jerin da kuma dan kadan kasa da high-ƙarfi marine gami irin su 5083.

Kayayyakin Injini

Ƙimar injina sun dogara da ƙarfi akan fushi da kauri. Teburin da ke ƙasa yana bayarwa wakilcin injiniyoyi don yawan zafin rai da ake amfani da su a cikin farantin karfe (H22, Ana amfani da bambance-bambancen H111/H116 dangane da aikin niƙa da aikace-aikace):

Shawarar ƙira: yi amfani da ƙarancin garantin mai siyarwa don ƙirar ƙarfi da kuma tabbatar da fushi (H22, H114, H116 da dai sauransu.) a kan zana callouts. Don gajiya-m ko manyan bene na tsari sun fi son maki mafi girma-ƙarfi 5xxx (misali, 5083).

Gwada gwajin 5754 Aluminum Sheet

Juriya na Lalata

• Gabaɗaya aiki: 5754 nuna juriya mai kyau zuwa yanayi da lalata ruwan teku idan aka kwatanta da sauran alkama da yawa. Yana samar da fim mai kariya na Al₂O₃ kuma yana tsayayya da rami a yanayin yanayin ruwa.
• Fasa & fantsama-zone: dace da yawa bene da topside aikace-aikace; don ci gaba da nutsewa ko matsanancin yanayi na chloride 5083/5086 za a iya fifita.
• Crevice da galvanic bayanin kula: kamar yadda yake tare da duk aluminum, guje wa hulɗa kai tsaye tare da jan karfe/tagulla da kuma kare musaya tare da masu rufe fuska, sutura ko gaskets don hana lalata galvanic.

Yanayi mara nauyi

• Yawan yawa: ≈ 2.66-2.70 g/cm³.
• Mass kowane yanki misali: a 4.0 mm kauri 5754 farantin nauyi ≈ 2.7 kg/m² × 0.004 m = 10.8 kg/m². (Ƙari gabaɗaya: taro a kowace m² ≈ kauri (m) × 2,700 kg/m³.)
• Amfani mai amfani: idan aka kwatanta da karfe (≈7.85 g/cm³) Irin wannan kauri shine ~ 65% mai sauƙi - mai mahimmanci ga tasoshin, ababen hawa da tsarin inda nauyi ke shafar kaya, amfani da man fetur da kwanciyar hankali.

Anti-Slip Surface

• Tsarin lissafi: Ana ba da faranti da aka tattake a cikin lu'u-lu'u/lozenge, 3-bar, 5-mashaya ko zagaye shugaba alamu.
• Tsayin tsari: yawanci 0.5 - 2.0 mm dangane da ma'auni da saitunan mirgina.
• Tasirin aiki: ƙwararrun shugabanni suna haɓaka rikice-rikice na gida kuma suna ba da jagoranci; suna kuma ƙara taurin lanƙwasawa, ba da izinin ɓangarorin bakin ciki a wasu lokutan sabis.
• Tsaftacewa & sawa: Tsarin mafi girma yana ba da mafi kyawun riko amma mai da hankali kan lalacewa akan wuraren da aka haɓaka - haɓaka ƙimar rayuwa da yanke tsari ta takalman mai amfani da nau'in kaya.

Weldability da Machinability

• Weldability: 5754 welds da kyau tare da daidaitattun matakan aluminum (MIG/GMAW, TIG/GTAW, gogayya-matsa waldi (Fsw)). Yi amfani da wayoyi masu cika Al-Mg (misali, Saukewa: ER5356) don ƙarfi da daidaituwar lalata. Sarrafa shigarwar zafi don rage murdiya da laushin HAZ.
• Injin iya aiki: janar machinability gaskiya ne; An fi yanke farantin ma'auni na bakin ciki ta hanyar shearing, Laser, plasma ko waterjet. Ƙirƙira da lanƙwasawa dole ne a yi lissafin jagorar ƙirar da taurin gida.

Huasheng Kunshin 5754 Aluminum Sheet

3. Amfanin 5754 Aluminum Tread Checkered Plate

5754 Aluminium tead checkered farantin yana ba da daidaitaccen haɗin haɗin aikin injiniya, juriya lalata, da kuma aikin saman zane, yin shi kayan da aka fi so don marine, masana'antu, da aikace-aikacen sufuri. Babban fa'idodinsa sun haɗa da masu zuwa:

Kyakkyawan juriya na lalata a cikin yanayin ruwa

Kamar Al-Mg alloy, 5754 yana nuna juriya mai ƙarfi ga lalatawar yanayi, ruwan teku fesa, da danshi yanayin bakin teku.

Fim ɗin aluminum oxide da ke samar da dabi'a yana kare farfajiya daga rami da lalata gabaɗaya, muhimmanci mika rayuwar sabis a cikin ruwa da na ketare aikace-aikace idan aka kwatanta da carbon karfe.

Babban ƙarfi-zuwa nauyi rabo

Tare da yawa kusan 2.7 g/cm³ da ƙarfin ɗaure yawanci jere daga 220 ku 290 MPa (ya danganta da fushi), 5754 farantin titin aluminium yana ba da ingantaccen aikin tsarin aiki yayin da ya kasance mai sauƙi fiye da ƙarfe.

Wannan fa'idar yana taimakawa rage nauyin tsarin gaba ɗaya, inganta ingancin man fetur da kuma iya biya a cikin jiragen ruwa da motoci.

Haɗin aikin hana zamewa

Ƙaƙƙarfan tatsi ko abin duba (kamar lu'u-lu'u, 3-bar, ko 5-bar zane) yana kara habaka juriya da zamewa.

Wannan fasalin yana da mahimmanci ga hanyoyin tafiya, bene, matakala, da ramps, musamman a jika, mai, ko kuma wuraren da ake yawan zirga-zirga, rage buƙatar ƙarin suturar rigakafin zamewa.

Kyakkyawan tsari da sassaucin ƙirƙira

5754 farantin da aka yi mata titin aluminium yana kula da ductility kuma ana iya lankwasa su, yanke, hatimi, kuma an kafa shi tare da daidaitattun kayan aikin ƙirƙira.

Idan aka kwatanta da mafi girma-magnesium gami kamar 5083, yana ba da sauƙin ƙirƙira yayin da har yanzu yana riƙe isasshen ƙarfi don yawancin fa'ida da fa'ida.

An Yi Amfani da Gadajen Motoci 5754 Aluminum Plate

Kyakkyawan walwala

Alloy ya dace sosai tare da hanyoyin walda na gama gari, ciki har da MIG da TIG waldi.

Abubuwan haɗin gwiwar welded suna nuna kyakkyawan ingancin injina da juriya na lalata lokacin da ake amfani da madaidaicin karafa da matakai., yana ba da damar ƙirƙira ingantacciyar ƙirƙira da shigarwa akan shafin.

Ƙananan kulawa da tsawon sabis

Godiya ga juriya na lalata da kuma tsayin daka, 5754 farantin titin aluminum yana buƙatar ƙaramar kulawa tsawon rayuwarsa.

Wannan yana rage yawan dubawa, shafi halin kaka, da downtime, yana haifar da rage farashin rayuwa gabaɗaya.

Dorewa da sake amfani da su

Aluminum ne 100% sake dubawa ba tare da asarar kaddarorin ba. Sake yin amfani da aluminum yana cinyewa har zuwa 95% karancin makamashi fiye da samarwa na farko, yin 5754 farantin titin aluminium wanda aka duba, zaɓi ne mai alhakin muhalli don aikin injiniya na zamani da ayyukan gini.

4. Key Applications na 5754 Aluminum Tread Checkered Plate

5754 Ana amfani da farantin tattake/checkered ko'ina a duk inda aka haɗa anti-slip yi, juriya lalata, weldability da ƙananan nauyi ake bukata.

A ƙasa na jera manyan wuraren aikace-aikacen, ba da jagorar takamaiman bayani (hankula kauri / fushi, nau'ikan tsari da bayanin shigarwa), da bayar da gajerun misalan aiki da za ku iya amfani da su wajen ƙira ko siyayya.

Ruwan saman saman, superstructures da sheltered bene

Me yasa ake amfani dashi: kyakkyawan juriya na ruwan teku/fasa, nauyi mai sauƙi da kuma kyakkyawan walƙiya don manyan gine-ginen jirgi, matattakala da bene na farko.
Yawan kauri: 2.0- 6.0 mm (2- 4 mm don bene na ƙafa; 4-6 mm don manyan zirga-zirgar ƙafa ko motocin sabis masu haske).
Haushi na al'ada: H22 / H114 / H116 dangane da tsari da ƙarfin da ake buƙata.
Tsarin & shugaba tsawo: lu'u-lu'u ko 3-bar; Tsawon shugaba 0.8-1.6 mm.

5754 Aluminum Takardun Takaddun Taka don Wuta

Kamfaninku na waje, hanyoyin tafiya na sabis da hanyoyin shiga (tsari)

Me yasa ake amfani dashi: lalata juriya da ƙananan topside taro rage tsarin halin kaka da sauƙi shigarwa.
Yawan kauri: 3.0- 6.0 mm, nauyi idan ana buƙatar samun abin hawa.
Tsarin: 3-mashaya ko mashaya 5 an fi so akan ramps don riƙon jagora.

Hanyoyin tafiya na masana'antu, matakala da dandamalin shuka

Me yasa ake amfani dashi: anti-zamewa surface, sauƙi na ƙirƙira, da juriya ga yanayin masana'antu (mai, m sunadarai).
Yawan kauri: 2.0- 4.0 mm ga hanyoyin tafiya na ma'aikata; 4.0- 6.0 mm inda manyan trolleys masu haske ko manyan motocin pallet ke aiki.
Daurewa: ƙwanƙwasawa tare da faranti na baya ko makafi; yi amfani da baya/sidiri a ƙarƙashin zanen gado na bakin ciki don hana ja-ta.

Sufuri: gadaje motoci, tirela benaye, matakai da allon gudu

Me yasa ake amfani dashi: yana inganta aikin ɗaukar nauyi ta hanyar rage nauyi yayin da ke samar da filaye masu ɗorewa masu ɗorewa.
Yawan kauri: 3.0- 6.0 mm (dangane da nauyin da ake sa ran: zirga-zirgar forklift mai nauyi → yi amfani da faranti mai kauri ko madadin).
Tsarin: lu'u-lu'u ko 3-bar; yi la'akari da haƙarƙarin walda a ƙarƙashin farantin don ƙara ƙarfin lodi ba tare da kauri mai yawa ba.
Saka dabarun: dace madaidaicin suturar lalacewa tare da waƙoƙin dabaran.

Tsakanin gine-gine, isa ga jama'a da kammala ginin

Me yasa ake amfani dashi: m masana'antu look, juriyar zamewa ga matakala da tudu, saukin gamawa (anodize / fenti).
Yawan kauri: 1.5- 3.0 mm don sutura da ramps inda manyan lodi ke kan tafiya.
Gama: goge ko rufaffiyar gamawa don ƙayatarwa; fim ɗin kariya a lokacin shigarwa don kauce wa karce.

5. Kwatanta da Sauran Aluminum Tread Plate

Teburin da ke ƙasa yana kwatanta 5754 tare da hanyoyin da aka saba amfani da su.

Tafsiri:

5083 an fi so don tsarin farko da mafi girman bayyanar ruwan teku;

5052 yana ba da mafi kyawun tsari fiye da 5754;

3003 yana da arha kuma mafi tsari amma ƙananan ƙarfi; bakin karfe yana ba da lalacewa da juriya na lalata amma yana da nauyi da tsada.

5754 yana zaune a daidaitaccen matsakaicin matsayi don faranti na saman gefe.

6. Ka'idojin inganci da Takaddun shaida

Lokacin tantancewa 5754 Tread farantin, na buƙatar bayyanannen takardu da bin ƙa'idodi:

• Matsayin kayan aiki: EN AW-5754 (Bature), Kwatankwacin ASTM don gwajin sinadarai / injina-ƙayyade ma'auni da fushi akan PO.
• Takaddar Gwajin Mill (MTC): IN 10204 3.1 (ko makamancin haka) kowane zafi / kuri'a tare da nazarin sinadarai da sakamakon tensile.
• Girma & haƙuri: saka kauri haƙuri, fili, nau'in tsari da tsayin shugaba.
• Binciken saman: sharuɗɗan yarda na gani don karce, alamar naɗi da haɗawa.
• Amincewar aji: don amfani da ruwa ko na waje, bayanin kula idan DNV / ABS / Lloyd ta / Ana buƙatar karɓar BV kuma a nemi takaddun shaida.
• Hanyoyin walda: suna buƙatar ƙwararrun WPS / Bayanan PQR idan za a yi waldi a cikin samarwa ko a cikin filin.

7. Huasheng Aluminum Gabatarwa

Huasheng Aluminum - masana'anta da ke iya isar da inganci mai inganci 5754 tattake farantin yawanci yayi:

• Cikakken sarrafa tsari: sama alloying, narke tacewa, sarrafa mirgina da embossing tare da madaidaicin bayanan martaba.
• Kewayon samfur: ma'auni masu ajiya 2-8 mm, nisa tsakanin 1000-2500 mm, mahara juna iri (lu'u-lu'u, 3-bar, 5-bar) da anodize/primer na zaɓi.
• inganci & ganowa: IN 10204 3.1 takaddun shaida, zafi/yawan ganowa, da gwajin inji a cikin gida.
• Tallafin ƙira: yankan, Bayanan Bayani na CNC, al'ada tsayi tsayin daka da pre-forming sabis; nasihar walda da taro ga ma'aikatan jirgin ruwa da masana'anta.
• Takaddun shaida: ISO 9001 da iyawa don samar da takaddun da ake buƙata na aji don ayyukan ruwa.

Jerin abubuwan dubawa: Lokacin kimanta masu kaya kamar Huasheng Aluminum, nemi bayanin tsari (narke tacewa, embossing roll tolerances), Samfuran MTC, Ƙididdiga na lahani na saman ƙasa da nassoshi daga ayyukan marine / sufuri.

8. Kammalawa

5754 aluminium tekin checkered farantin yayi nisa fiye da takarda mai sauƙi mai sauƙi. Kayan aikin injiniya ne mai ƙarfin gaske wanda ke ba da a “babu sulhu” bayani don matsakaicin matsakaici- zuwa aikace-aikace masu nauyi.

Ya yi nasarar cike gibin da ke tsakanin maƙasudi na gaba ɗaya da maɗaurin ƙarfi mai ƙarfi, samar da haɗin gwiwa na musamman kuma mai ban sha'awa, marine-sa lalata juriya, da kyakkyawan ƙirƙira.

Ga masu zanen kaya da injiniyoyi masu neman dorewa, lafiya, da abu mara nauyi wanda zai iya dogara da matsi, 5754 tattake farantin ne mai hankali da dabarun zabi.

FAQs

Q1 - Ina 5754 dace da jirgin ruwa plating?
A: A'a - faranti na ƙwanƙwasa da faranti na farko gabaɗaya suna buƙatar gawawwakin ruwa masu ƙarfi kamar su 5083/5086. 5754 yana da kyau ga topsides, superstructures da kuma ba na farko bene.

Q2 - Wane tsayin tsari zan zaɓa don yin ado?
A: Matsakaicin tsayin ƙirar ƙira 0.8- 1.8 mm. Zaɓi ƙananan tsayi inda hatimi/tsaftacewa ke da mahimmanci kuma mafi girma don iyakar riko ƙarƙashin yanayi mai mai/m. Tabbatar da ma'aunin ƙirar mai kaya.

Q3 - Can 5754 za a welded farantin karfe zuwa bakin karfe?
A: Ee, amma ware galvanically (insulating washers/seals) da kuma ƙirƙira haɗin gwiwa don guje wa lalata ɓarna. Yi amfani da karafan filler masu jituwa da ingantattun hanyoyin walda.

Q4 - Ta yaya zan ƙayyade 5754 farantin karfe akan PO?
A: Haɗa gami & fushi (misali, EN AW-5754 H22), kauri & haƙuri, nau'in tsari da tsayin shugaba, fadi/tsawon takardar, MTC da ake bukata (IN 10204 3.1), gama, da duk wani bukatu na al'umma.

Q5 - Abin da kulawa ke yi 5754 farantin karfe bukata?
A: tsaftacewa na yau da kullum (cire gishiri, grit, mai), duba fasteners da hadaya anodes (idan aka yi amfani da shi), da sake gyarawa inda lalacewa mai lalacewa yana rage kauri ko kaddarorin kariya.