| Sipesifikesonu | Apejuwe / Range |
| Ohun elo Tiwqn | 8011, 1235, 8079 |
| Ibinu | O, H18, H22, H24 |
| Sisanra | 10 – 50 microns (μm) |
| Ooru-Sealing aso | Ooru-ṣiṣẹ alemora tabi polima |
| Aso Iwuwo | 1 – 5 g/m² |
| Ooru Igbẹhin otutu | 180°C – 250°C (ti o gbẹkẹle lori ilana ti a bo) |
| Igbẹhin Agbara | 2 – 5 lb/ni tabi 10 – 25 N/15mm (ti o gbẹkẹle lori ohun elo) |
Kaabo si Huasheng Aluminiomu, awọn asiwaju factory ati osunwon ti ga-didara Hot Seal Aluminiomu Foil. Ise apinfunni wa ni lati pese igbẹkẹle, daradara, ati awọn solusan iṣakojọpọ imotuntun si awọn ile-iṣẹ kaakiri agbaye.
Gbona Igbẹhin Aluminiomu bankanje, tun mo bi ooru asiwaju bankanje, ti wa ni pataki apẹrẹ lati ṣẹda kan hermetic asiwaju nigba ti tunmọ si ooru. Agbara lilẹ alailẹgbẹ yii jẹ ki o jẹ yiyan pipe fun awọn ohun elo iṣakojọpọ nibiti ifipamọ tuntun, aabo lati ita eroja, ati tamper resistance ni o wa julọ. Ni Huasheng Aluminiomu, a igberaga ara wa lori ipade ati ki o koja ga awọn ajohunše ni aluminiomu bankanje gbóògì, aridaju awọn ọja wa ni ibamu pẹlu awọn ajohunše agbaye bii ASTM B209, EN573-1, IN 546, ISO 209-1, GB/T 3198, GB/T 3190, GB/T 3880.1-2006, ISO 9001-2000, ati siwaju sii. Awọn ọja wa tun faramọ ounjẹ ati awọn iṣedede oogun bii SGS ati FDA.
Igbẹhin Igbẹhin Aluminiomu Gbona wa jẹ olokiki fun awọn abuda alailẹgbẹ ti o jẹ ki o jẹ yiyan ti o fẹ fun ọpọlọpọ awọn ohun elo apoti:
| Awọn abuda | Apejuwe |
| Puncture Resistance | Withstands puncture lai bibajẹ, gbigba fun awọn iṣẹ ṣiṣi diẹ lai ṣe idiwọ iṣẹ ṣiṣe lilẹ. |
| Peelability | Le ni irọrun yapa lati nkan ti o ni edidi nigbati ṣiṣi ba nilo, aridaju wewewe ati ailewu nigba gbigbe ati lilo. |
| Tun-sealability | Nfun resealable iṣẹ, ṣiṣe awọn ti o dara fun apoti ti o nilo ọpọ šiši ati awọn pipade. |
| Iwontunwonsi Resistance | Koju awọn olomi kemikali si iye kan, aridaju aabo ati iduroṣinṣin ti awọn akoonu ti akopọ. |
| Atẹgun ti o gaju | Le duro ni iwọn otutu giga ati sterilization titẹ giga ni 121°C, aridaju ailesabiyamo ati ailewu ti awọn akoonu ti akopọ. |
Ni Huasheng Aluminiomu, ti a nse kan jakejado ibiti o ti ni pato lati ṣaajo si Oniruuru apoti ibeere:
| Sipesifikesonu | Apejuwe / Range |
| Ohun elo Tiwqn | 8011, 1235, 8079 |
| Ibinu | O, H18, H22, H24 |
| Sisanra | 10 – 50 microns (μm) |
| Ooru-Sealing aso | Ooru-ṣiṣẹ alemora tabi polima |
| Aso Iwuwo | 1 – 5 g/m² |
| Ooru Igbẹhin otutu | 180°C – 250°C (ti o gbẹkẹle lori ilana ti a bo) |
| Igbẹhin Agbara | 2 – 5 lb/ni tabi 10 – 25 N/15mm (ti o gbẹkẹle lori ohun elo) |
| Igbẹhin Iduroṣinṣin | Hermetic edidi, idilọwọ ọrinrin ati atẹgun atẹgun |
| Titẹ sita | Titẹ sita ti o ga fun awọn aami ati alaye |
| Dada Ipari | Imọlẹ, matte, yinrin |
| Yipo Iwọn | Asefara da lori ohun elo ati ẹrọ |
| Roll Gigun | Asefara da lori ohun elo ati ẹrọ |
| Ibamu | Ni ibamu pẹlu awọn pilasitik, iwe, ati awọn miiran sobsitireti |
| Ibamu | Pade awọn ilana ile-iṣẹ ati awọn iṣedede |
| Iṣakojọpọ ati Ibi ipamọ | Awọn itọnisọna fun aabo lati ibajẹ ti ara, imole, ati iwọn otutu iwọn otutu |
| Lilo | Ideri bankanje fun iṣakojọpọ awọn apoti bii wara, wara, warankasi, wara didi, omi, oje, ohun mimu, kọfi, tii, ounje, nudulu, ohun ikunra, igba, K-ago, kofi kapusulu, ati be be lo. |
Wa ooru lilẹ foils le bo kan orisirisi ti ohun elo, aridaju ibamu pẹlu o yatọ si apoti sobsitireti:
| Ohun elo | Apejuwe |
| PP (Polypropylene) | Wọpọ ti a lo ninu ounjẹ ati apoti ile-iṣẹ, aridaju lilẹ ati freshness ti ounje. |
| PS (Polystyrene) | Ti a lo ninu apoti ẹrọ itanna ati ohun elo tabili isọnu, pese ọrinrin resistance ati aabo. |
| PE (Polyethylene) | Ti a lo jakejado ni ile-iṣẹ apoti, aabo awọn ọja lati awọn ipa ayika ita. |
| PVC (Polyvinyl kiloraidi) | Lo ni USB idabobo, awọn ohun elo ilẹ, ati apoti ohun elo iṣoogun, laimu ti o dara ọrinrin resistance ati oju ojo resistance. |
| PET (Polyethylene Terephthalate) | Ga akoyawo, lo ninu ounje ati nkanmimu apoti, ṣiṣẹda daradara freshness apoti. |
| AVE | Awọn ohun elo pato le yatọ, nilo ohun elo ni pato awọn oju iṣẹlẹ. |
| DMSO (Dimethyl sulfoxide) | Lo bi ohun Organic epo, lilo pupọ ni awọn ile-iṣẹ elegbogi ati awọn ile-iṣẹ kemikali fun iṣakojọpọ oogun. |
Iwe bankanje aluminiomu ti o gbona nfunni ni ọpọlọpọ awọn anfani ti o jẹ ki o jẹ yiyan ti o dara julọ fun awọn solusan apoti:
| Awọn anfani | Apejuwe |
| Itoju ti Freshness | Igbẹhin hermetic ti a ṣẹda nipasẹ bankanje asiwaju gbigbona ṣe itọju alabapade ti awọn ẹru ti a ṣajọpọ, extending wọn selifu aye. |
| Tamper Resistance | Tiipa-ooru ti a fidi si n pese ẹya-ara ti o han gbangba, aridaju awọn iyege ti awọn akoonu. |
| Iwapọ | Gbona bankanje aluminiomu asiwaju jẹ wapọ ati ki o adaptable si orisirisi awọn ọna kika apoti, pẹlu awọn apo kekere, awọn atẹ, ati awọn akopọ roro. |
| Brand Hihan | Awọn bankanje le ti wa ni tejede ati adani, imudara hihan brand ati afilọ ọja. |
Igbẹhin aluminiomu ti o gbona wa ni a ṣe lati awọn ohun elo didara to gaju pẹlu awọn akojọpọ kemikali to peye:
| Eroja | 8011 | 1235 | 8021 | 8079 |
| Al | Awọn olurannileti | 99.3% | 99.0% | Awọn olurannileti |
| Ati | 0.50 – 0.90 | 0.65 (Bẹẹni+ Igbagbo) | 0.6-1.0 | 0.50-0.90 |
| Fe | 0.60 – 1 | ≤0.1 | 0.70-1.3 | – |
| Ku | ≤ 0.10 | ≤ 0.05 | ≤0.1 | ≤0.05 |
| Mn | ≤ 0.20 | ≤ 0.05 | ≤0.05 | ≤0.05 |
| Mg | ≤ 0.050 | ≤ 0.05 | ≤0.05 | ≤0.05 |
| Kr | ≤ 0.050 | – | – | – |
| Zn | ≤ 0.10 | ≤ 0.10 | ≤0.10 | ≤0.10 |
| Ti | ≤ 0.080 | ≤ 0.06 | ≤0.08 | – |
Awọn ohun-ini ẹrọ ti ẹrọ itanna aluminiomu ti o gbona wa ni idaniloju agbara ati irọrun rẹ:
| Alloy | Ibinu | Agbara Agbara RM/MPa | Elongation A50mm(%)≥ | Elongation A100mm(%)≥ |
| 8011 8079 | O | 50-120 | 13-15 | 0.5-4 |
| H22 | 90-150 | 5-6 | 1.0-2.0 | |
| H24 | 120-170 | 2-5 | – | |
| H26 | 140-190 | 1-2 | – | |
| 1235 | H14 H24 | 110-160 | 4-6 | 2-3 |
| H16 H26 | 125-180 | 2 | 1 |
Gbona seal aluminiomu bankanje ri ni ibigbogbo lilo ni Oniruuru ise nitori awọn oniwe-lilẹ-ini:
Igbẹhin aluminiomu ti o gbona wa fun iṣakojọpọ ounjẹ ti a ṣe atunṣe lati pade awọn ibeere ti o lagbara ti ile-iṣẹ ounjẹ:
| Alloy | Ibinu | Awọn sisanra ti o wọpọ |
| 8011 | H18 | 10 – 20 microns |
Awọn ohun elo pẹlu awọn ideri ti a fi di ooru lori awọn apoti wara, apo kekere fun ipanu, ati awọn akopọ roro fun awọn condiments.
Apẹrẹ fun elegbogi ile ise, wa gbona seal aluminiomu bankanje idaniloju awọn iyege ati aabo ti awọn oogun:
| Alloy | Ibinu | Awọn sisanra ti o wọpọ |
| 8021 | O | 20 – 30 microns |
Awọn ohun elo ti o wọpọ pẹlu awọn akopọ roro fun awọn tabulẹti, awọn agunmi, ati apoti iwọn lilo ẹni kọọkan fun awọn ọja elegbogi.
Igbẹhin aluminiomu ti o gbona wa fun awọn ohun ikunra n ṣakiyesi awọn ibeere iṣakojọpọ ti ile-iṣẹ, titọju didara awọn ọja ikunra:
| Alloy | Ibinu | Awọn sisanra ti o wọpọ |
| 1235 tabi 8011 | H18 | 15 – 25 microns |
Awọn apẹẹrẹ pẹlu awọn apo idalẹnu ooru fun awọn ipara, lotions, ati apoti kọọkan fun awọn wipes ohun ikunra.
Ṣiṣẹ awọn aini apoti ti ọpọlọpọ awọn ohun ile-iṣẹ lọpọlọpọ, wa gbona seal aluminiomu bankanje pese aabo nigba ipamọ ati gbigbe:
| Alloy | Ibinu | Awọn sisanra ti o wọpọ |
| 3003 tabi 8079 | H22 tabi H24 | 20 – 40 microns |
Eyi pẹlu iṣakojọpọ-ooru fun awọn paati ohun elo, ọkọ ayọkẹlẹ awọn ẹya ara, ati awọn ọja ile-iṣẹ miiran.
Iṣelọpọ ti bankanje aluminiomu ti o gbona ni Huasheng Aluminiomu jẹ ilana iṣelọpọ pataki kan:
Lati rii daju pe awọn ipo lilẹ to dara julọ ati ibamu pẹlu awọn ohun elo apoti rẹ, tẹle awọn ero wọnyi:
Ni Huasheng Aluminiomu, ti a nse kan orisirisi ti gbajumo gbona seal aluminiomu awọn ọja bankanje lati ba awọn aini rẹ pato:
| Apejuwe | Sisanra |
| 115 mm Eerun Pierce Igbẹhin Bankanje | 115 mm |
| 115 mm Sterile Roll Gas Perm Igbẹhin | 115 mm |
| 78 mm Sterile Roll Peeli Igbẹhin DMSO bankanje | 78 mm |
| 115 mm Sterile Roll Pierce Igbẹhin Igbẹhin PS | 115 mm |
| 115 mm Eerun Peeli Igbẹhin DMSO bankanje | 115 mm |
| 78 mm Sterile Roll Clear Seal Weld | 78 mm |
| 78 mm Sterile Roll Pierce Igbẹhin Bankanje | 78 mm |
| 115 mm Sterile Roll Clear Seal Weld | 115 mm |
| 78 mm Eerun Clear Seal Weld | 78 mm |
| 115 mm Sterile Roll Pierce Igbẹhin Bankanje | 115 mm |
| 78 mm Sterile Roll Ko Igbẹhin Peeli | 78 mm |
| 78 mm Eerun Ko Igbẹhin Peeli | 78 mm |
| 85 µm Aluminiomu yẹ (Dudu) ooru lilẹ bankanje | 85 µm |
| 115 mm Eerun Clear Seal Weld | 115 mm |
| 78 mm Eerun Peeli Igbẹhin Bankanje | 78 mm |
| 78 mm Sterile Roll Gas Perm Igbẹhin | 78 mm |
| 78 mm Eerun Clear Seal Pierce | 78 mm |
| 115 mm Eerun Pierce Igbẹhin Fọil PS | 115 mm |
| 78 mm Sterile Roll Clear Seal Perf | 78 mm |
| 70 µm peelable AVE Aluminiomu (Pupa) ooru lilẹ foils | 70 µm |
| 78 mm Eerun Ko Igbẹhin Perf | 78 mm |
| 115 mm Sterile Roll Clear Seal Perf | 115 mm |
| 78 mm Eerun Pierce Igbẹhin Bankanje | 78 mm |
| 78 mm Eerun Peeli Igbẹhin DMSO bankanje | 78 mm |
| 115 mm Eerun Peeli Igbẹhin Bankanje | 115 mm |
| 38 µm Pierceable ati Aluminiomu Peelable (Buluu) ooru lilẹ foils | 38 µm |
| 115 mm Sterile Roll Clear Seal Pierce | 115 mm |
| 78 mm Sterile Roll Pierce Igbẹhin Igbẹhin PS | 78 mm |
| 78 mm Sterile Roll Clear Seal Pierce | 78 mm |
| 78 mm Eerun Gas Perm Igbẹhin | 78 mm |
| 78 mm Ifo Roll Peeli Igbẹhin Bankanje | 78 mm |
| 115 mm Ifo Roll Peeli Igbẹhin Bankanje | 115 mm |
| 115 mm Eerun Ko Igbẹhin Peeli | 115 mm |
| 115 mm Sterile Roll Peeli Igbẹhin DMSO bankanje | 115 mm |
| 115 mm Eerun Gas Perm Igbẹhin | 115 mm |
| 115 mm Sterile Roll Ko Igbẹhin Peeli | 115 mm |
| 115 mm Eerun Clear Seal Pierce | 115 mm |
| 78 mm Eerun Pierce Igbẹhin Fọil PS | 78 mm |
| 20 PP/PS lilu irọrun µm (Alawọ ewe) ooru asiwaju foils | 20 µm |
| 115 mm Eerun Ko Igbẹhin Perf | 115 mm |
Kaabọ si HuaSheng Aluminiomu……
Ni HuaSheng Aluminiomu, awa pri……
Kaabọ si Huasheng Aluminiomu…
Kaabọ si HuaSheng Aluminiomu……
Kaabọ si Huasheng aluminiomu…
Ifaara Huasheng Alu…
Henan Huasheng Aluminum Co., Ltd., Ltd (HHALU fun kukuru), iṣeto ni 2001, wa ni Ilu Huiguo, awọn gbajumọ Aluminiomu olu ti Henan Province, O jẹ olupilẹṣẹ alamọdaju ati ṣe alabapin ninu iwadii naa, idagbasoke, gbóògì, tita ati iṣẹ ti aluminiomu dì awo, aluminiomu okun, aluminiomu bankanje, aluminiomu rinhoho ati aluminiomu Circle.
Ni afikun, HHALU tun ta awo aluminiomu fun ikole ati awọn ọkọ oju omi, aluminiomu digi awo, ati Oko aluminiomu alloy awo.
No.53, Ọna Dongming, Zhengzhou, Henan, China
Aṣẹ-lori-ara © Huasheng Aluminiomu 2023. Gbogbo awọn ẹtọ wa ni ipamọ.
