Hot Seal Aluminium Foil

2025-01-14 09:35:10

Tlhaloso	Tlhaloso/Range
Sebopeho sa Lintho	8011, 1235, 8079
Khalefo	O, H18, H22, H24
Botenya	10 – 50 microns (μm)
Mocheso oa ho Koala Mocheso	Sekhomaretsi se kentsoeng ke mocheso kapa polymer
Coating Weight	1 – 5 g/m²
Mocheso oa Tiiso ea Mocheso	180°C – 250°C (e itšetlehileng ka tlhahiso ea ho roala)
Tiiso Matla	2 – 5 lb/ka kapa 10 – 25 N/15mm (e itshetlehileng hodima kopo)

Rea u amohela ho Huasheng Aluminium, feme e etelletseng pele le morekisi oa thekiso ea boleng bo holimo ea Hot Seal Aluminium Foil. Sepheo sa rona ke ho fana ka botšepehi, e sebetsang hantle, le litharollo tse ncha tsa ho paka liindasteri ho pota lefatše.

Selelekela ho Hot Seal Aluminium Foil

Hot Seal Aluminium Foil, e tsejoang hape ka hore ke foil ea tiiso ea mocheso, e etselitsoe ka ho hlaka ho etsa tiiso ea hermetic ha e le tlas'a mocheso. Bokhoni bona bo ikhethang ba ho tiisa bo e etsa khetho e nepahetseng bakeng sa lits'ebetso tsa ho paka moo ho bolokoang bocha, tšireletso linthong tse kantle, 'me khanyetso ea tamper ke eona e ka sehloohong. Ho Huasheng Aluminium, re motlotlo ka ho kopana le ho feta litekanyetso tse phahameng ka ho fetisisa tsa tlhahiso ea foil ea aluminium, ho netefatsa hore lihlahisoa tsa rona li ikamahanya le maemo a machaba a kang ASTM B209, EN573-1, IN 546, ISO 209-1, GB/T 3198, GB/T 3190, GB/T 3880.1-2006, ISO 9001-2000, le ho feta. Lihlahisoa tsa rona li boetse li latela litekanyetso tsa lijo le lithethefatsi tse kang SGS le FDA.

Mocheso Ho Tiisa Aluminium Foil Litšobotsi

Our Hot Seal Aluminium Foil e tumme ka litšobotsi tsa eona tse ikhethang tse e etsang khetho e ratoang bakeng sa lits'ebetso tse fapaneng tsa ho paka.:

Litšobotsi	Tlhaloso
Puncture Resistance	E mamella ho phunya ntle le tšenyo, ho lumella lits'ebetso tse nyane tsa ho bula ntle le ho senya ts'ebetso ea ho tiisa.
Peelability	E ka arohanngoa habonolo le ntho e tiisitsoeng ha ho buloa ho hlokahala, ho netefatsa boiketlo le polokeho nakong ya sepalangoang le tshebediso.
Ho tiisa hape	E fana ka ts'ebetso e ka hlakisoang, ho etsa hore e lokele ho paka tse hlokang ho buloa le ho koaloa hangata.
Ho hanyetsa ho qhibiliha ho itekanetseng	E hanela metsoako ea lik'hemik'hale ho isa bohōleng bo itseng, ho netefatsa polokeho le botsitso ba dikahare tse pakiloeng.
Ho Sterilization ka Khatello e Phahameng	E khona ho mamella mocheso o phahameng le ho thibela likokoana-hloko ho 121°C, ho netefatsa bohloeki le polokeho ea likateng tse paketsoeng.

Litlhaloso tsa Foil ea Aluminium e Chesang

Ho Huasheng Aluminium, re fana ka mefuta e mengata ea litlhaloso ho sebetsana le litlhoko tse fapaneng tsa ho paka:

Tlhaloso	Tlhaloso/Range
Sebopeho sa Lintho	8011, 1235, 8079
Khalefo	O, H18, H22, H24
Botenya	10 – 50 microns (μm)
Mocheso oa ho Koala Mocheso	Sekhomaretsi se kentsoeng ke mocheso kapa polymer
Coating Weight	1 – 5 g/m²
Mocheso oa Tiiso ea Mocheso	180°C – 250°C (e itšetlehileng ka tlhahiso ea ho roala)
Tiiso Matla	2 – 5 lb/ka kapa 10 – 25 N/15mm (e itshetlehileng hodima kopo)
Tiisa Botšepehi	Setiiso sa Hermetic, e thibela ho kenella ha mongobo le oksijene
Khatiso	Khatiso ea boemo bo holimo bakeng sa li-logos le tlhahisoleseling
Surface Finish	E kganyang, matte, satin
Bophara Bophara	Customizable e ipapisitse le ts'ebeliso le mochini
Bolelele ba Roll	Customizable e ipapisitse le ts'ebeliso le mochini
Ho lumellana	E lumellana le polasetiki, pampiri, le substrates tse ling
Ho latela melao	E kopana le melao le maemo a indasteri
Ho paka le ho Boloka	Litaelo tsa ts'ireletso khahlanong le tšenyo ea 'mele, kganya, le mocheso o feteletseng
Tšebeliso	Sekoahelo sa foil bakeng sa ho paka lijana tse kang yoghurt, lebese, chisi, ice cream, metsi, lero, seno, kofi, tee, dijo, li-noodle, setlolo, seasoning, K-senoelo, kofi capsule, etc.

Mocheso Ho Tiisa Lisebelisoa tsa Aluminium Foil

Lisebelisoa tsa rona tsa ho koala mocheso li ka koahela lisebelisoa tse sa tšoaneng, ho etsa bonnete ba ho lumellana le li-substrates tse fapaneng tsa ho paka:

Lintho tse bonahalang	Tlhaloso
PP (Polypropylene)	E sebelisoa hangata lijong le liphutheloana tsa indasteri, ho netefatsa ho tiisa le ho nchafala ha dijo.
PS (Polystyrene)	E sebelisoa ka har'a liphutheloana tsa elektronike le li-tableware tse lahliloeng, ho fana ka ho hanyetsa le ho sireletsa mongobo.
PE (Polyethylene)	E sebelisoa haholo indastering ea ho paka, ho sireletsa lihlahisoa ho tsoa tšusumetsong ea kantle ea tikoloho.
PVC (Polyvinyl Chloride)	E sebelisoa ka ho kenngoa ha cable, thepa ea fatše, le ho paka thepa ea bongaka, e fanang ka ho hanyetsa mongobo hantle le ho hanyetsa boemo ba leholimo.
PET (Polyethylene Terephthalate)	Ponaletso e phahameng, se sebedisoang ka ho paka dijo le seno, ho etsa sephuthelo se ntlafetseng sa botjha.
AVE	Lisebelisoa tse khethehileng li ka fapana, ho hloka ts'ebeliso maemong a khethehileng.
DMSO (Dimethyl Sulfoxide)	E sebelisoa e le motsoako oa manyolo, e sebelisoang haholo indastering ea meriana le ea lik'hemik'hale bakeng sa ho paka lithethefatsi.

Melemo ea Seal Seal Aluminium Foil

Letlapa le chesang la aluminium foil le fana ka melemo e mengata e etsang hore e be khetho e ntle bakeng sa tharollo ea ho paka:

Melemo	Tlhaloso
Paballo ea Bocha	The hermetic seal e entsoeng ka hot seal foil e boloka bocha ba thepa e pakiloeng, ho lelefatsa sethala sa bona sa bophelo.
Tamper Resistance	Ho koaloa ho koaletsoeng mocheso ho fana ka tšobotsi e hlakileng ea tamper, ho netefatsa botshepehi ba dikahare.
Ho feto-fetoha ha maemo	Hot seal aluminium foil e sebetsa ka mokhoa o fapaneng ebile e khona ho ikamahanya le mefuta e fapaneng ea liphutheloana, ho kenyeletsa le mekotla, literei, le lipakete tsa blister.
Ponahalo ea Brand	The foil ka hatisoa le customized, ho matlafatsa ponahalo ea lets'oao le boipiletso ba sehlahisoa.

Sebopeho sa Lik'hemik'hale sa Letlapa le Chesang la Aluminium Foil

Foil ea rona ea aluminium e chesang e entsoe ka li-alloys tsa boleng bo holimo tse nang le metsoako e nepahetseng ea lik'hemik'hale:

Element	8011	1235	8021	8079
Al	Likhopotso	99.3%	99.0%	Likhopotso
Le	0.50 – 0.90	0.65 (E+Tumelo)	0.6-1.0	0.50-0.90
Fe	0.60 – 1	≤0.1	0.70-1.3	–
Cu	≤ 0.10	≤ 0.05	≤0.1	≤0.05
Mong	≤ 0.20	≤ 0.05	≤0.05	≤0.05
Mg	≤ 0.050	≤ 0.05	≤0.05	≤0.05
Kr	≤ 0.050	–	–	–
Zn	≤ 0.10	≤ 0.10	≤0.10	≤0.10
Ea	≤ 0.080	≤ 0.06	≤0.08	–

Mechanical Properties of Hot Seal Aluminium Foil

Thepa ea mochini ea foil ea rona ea aluminium e chesang e tiisa matla le ho fetoha ha eona:

Alloy	Khalefo	Matla a Tensile Rm/MPa	Elongation A50mm(%)≥	Elongation A100mm(%)≥
8011 8079	O	50-120	13-15	0.5-4
H22	90-150	5-6	1.0-2.0
H24	120-170	2-5	–
H26	140-190	1-2	–
1235	H14 H24	110-160	4-6	2-3
H16 H26	125-180	2	1

Likopo tsa Hot Seal Aluminium Foil

Letlapa le chesang la aluminium foil le fumana ts'ebeliso e atileng liindastering tse fapaneng ka lebaka la thepa ea eona ea ho tiisa.:

Setiiso se Chesang sa Aluminium Foil bakeng sa Packaging ea Lijo

Setifikeiti sa rona sa aluminium foil e chesang bakeng sa ho paka lijo e entsoe ho fihlela litlhoko tse thata tsa indasteri ea lijo.:

Alloy	Khalefo	Botenya bo Tloaelehileng
8011	H18	10 – 20 microns

Likopo li kenyelletsa likoahelo tse koetsoeng ka mocheso lijaneng tsa yogurt, mekotlana ea lijo tse bobebe, le lipakete tsa blister bakeng sa li-condiments.

Hot Seal Aluminium Foil bakeng sa Meriana

E etselitsoe indasteri ea meriana, tiiso ea rona e chesang ea aluminium foil e tiisa botšepehi le tšireletso ea meriana:

Alloy	Khalefo	Botenya bo Tloaelehileng
8021	O	20 – 30 microns

Lisebelisoa tse tloaelehileng li kenyelletsa lipakete tsa blister bakeng sa matlapa, li-capsules, le sephutheloana sa tekanyo ea litekanyetso tsa motho ka mong bakeng sa lihlahisoa tsa meriana.

Hot Seal Aluminium Foil bakeng sa Litlolo

Setifikeiti sa rona sa aluminium se chesang se chesang bakeng sa litlolo se khotsofatsa litlhoko tsa indasteri tsa ho paka, ho boloka boleng ba lihlahisoa tsa litlolo:

Alloy	Khalefo	Botenya bo Tloaelehileng
1235 kapa 8011	H18	15 – 25 microns

Mehlala e kenyelletsa li-sachets tse koetsoeng ka mocheso bakeng sa litlolo, litlolo, le ho paka ka bomong bakeng sa litlolo tsa litlolo.

Hot Seal Aluminium Foil bakeng sa Lihlahisoa tsa Indasteri

Ho sebeletsa litlhoko tsa ho paka tsa mefuta e mengata ea lintho tsa indasteri, tiiso ea rona e chesang ea aluminium foil e fana ka tšireletso nakong ea polokelo le lipalangoang:

Alloy	Khalefo	Botenya bo Tloaelehileng
3003 kapa 8079	H22 kapa H24	20 – 40 microns

Sena se kenyelletsa sephutheloana se tiisitsoeng ka mocheso bakeng sa likarolo tsa hardware, likarolo tsa likoloi, le thepa e meng ea indasteri.

Setiiso se chesang sa Aluminium Foil Manufacturing process

Ho hlahisoa ha foil ea aluminium e chesang ho Huasheng Aluminium e kenyelletsa mokhoa o khethehileng oa tlhahiso:

Aluminium Rolling: Ts'ebetso e qala ka ho roala maqephe a Aluminium ho fihlela botenya bo lakatsehang.
Kopo ea ho roala: Ho roala ho tiisa mocheso ho sebelisoa ka lehlakoreng le leng la letlapa la Aluminium, hangata polima e kenang tshebetsong ha e pepesehetse mocheso.
Ho phekola: Aluminium e koahetsoeng e kena ts'ebetsong ea ho folisa ho netefatsa ho khomarela hantle le ho kenya ts'ebetso ea lera le koalang mocheso..
Slitting le Packaging: Ka mor'a moo, foil e aroloa ka lirolo tsa bophara bo hlokahalang ebe e phutheloa bakeng sa ho ajoa.

Litaelo bakeng sa Tšebeliso

Ho netefatsa maemo a nepahetseng a ho tiisa le ho lumellana le lisebelisoa tsa hau tsa ho paka, latela maikutlo ana:

Maemo a Matle a Tiiso: Latela tataiso e khothalelitsoeng ea ho koala mocheso le likhatello bakeng sa liphetho tse ntle.
Teko ea Tšebelisano: Etsa tlhahlobo ea tšebelisano pele ho tlhahiso e felletseng ho netefatsa hore foil e chesang ea tiiso e sebetsa hantle ka thepa eo u e khethileng ea ho paka..

Lihlahisoa tse tummeng tsa Seal Seal Aluminium Foil

Ho Huasheng Aluminium, re fana ka mefuta e fapaneng ea lihlahisoa tse tsebahalang tsa hot seal aluminium foil ho lumellana le litlhoko tsa hau tse ikhethileng:

Tlhaloso	Botenya
115 limilimithara Roll Pierce Seal Foil	115 mm
115 limilimithara Sterile Roll Gas Perm Seal	115 mm
78 mm Sterile Roll Peel Seal DMSO Foil	78 mm
115 limilimithara Sterile Roll Pierce Seal Foil PS	115 mm
115 limilimithara Roll Peel Seal DMSO Foil	115 mm
78 mm Sterile Roll Clear Seal Weld	78 mm
78 limilimithara Sterile Roll Pierce Seal Foil	78 mm
115 mm Sterile Roll Clear Seal Weld	115 mm
78 limilimithara Hlakola Seal Weld	78 mm
115 limilimithara Sterile Roll Pierce Seal Foil	115 mm
78 mm Sterile Roll Clear Seal Peel	78 mm
78 limilimithara Hlakola Seal Peel	78 mm
85 µm Aluminium e sa feleng (Ntsho) mocheso ho tiisa foil	85 µm
115 limilimithara Hlakola Seal Weld	115 mm
78 mm Roll Peel Seal Foil	78 mm
78 limilimithara Sterile Roll Gas Perm Seal	78 mm
78 mm Roll Hlakola Seal Pierce	78 mm
115 limilimithara Roll Pierce Seal Foil PS	115 mm
78 mm Sterile Roll Clear Seal Perf	78 mm
70 µm Aluminium ea AVE e peelable (Khubedu) likhaba tsa ho koala mocheso	70 µm
78 mm Roll Clear Seal Perf	78 mm
115 mm Sterile Roll Clear Seal Perf	115 mm
78 limilimithara Roll Pierce Seal Foil	78 mm
78 limilimithara Roll Peel Seal DMSO Foil	78 mm
115 mm Roll Peel Seal Foil	115 mm
38 µm Aluminium e Hlahang le e Peeleble (Boputsoa) likhaba tsa ho koala mocheso	38 µm
115 mm Sterile Roll Clear Seal Pierce	115 mm
78 limilimithara Sterile Roll Pierce Seal Foil PS	78 mm
78 mm Sterile Roll Clear Seal Pierce	78 mm
78 mm Roll Gas Perm Seal	78 mm
78 mm Sterile Roll Peel Seal Foil	78 mm
115 mm Sterile Roll Peel Seal Foil	115 mm
115 limilimithara Hlakola Seal Peel	115 mm
115 mm Sterile Roll Peel Seal DMSO Foil	115 mm
115 mm Roll Gas Perm Seal	115 mm
115 mm Sterile Roll Clear Seal Peel	115 mm
115 mm Roll Hlakola Seal Pierce	115 mm
78 limilimithara Roll Pierce Seal Foil PS	78 mm
20 µm PP/PS e phunyeletsoeng habonolo (Botala) mocheso tiiso foils	20 µm
115 mm Roll Clear Seal Perf	115 mm

Lihlahisoa tsa rona tsa aluminium foil li sebelisoa indastering le lits'ebetsong tse fapaneng tse fapaneng, ho kenyeletsa le ho paka, koloi, kaho, elektronike le malapa. Mehlala e meng ea lits'ebetso ke ena: