| Ukutyeba (mm) | 0.2 – 6 |
| Ububanzi (mm) | 500 – 2800 |
| Ubude (mm) | 1000 – 12000 |
| IiNdlela zokuNyangwa koMphezulu | Mill Gqiba, Ilungisiwe, Ibrashi, njl. |
3004 I-aluminiyam yialloyi eyaziwa ngokuba namandla ayo abalaseleyo, ukubumbeka, kunye nokumelana nomhlwa. Isetyenziswa ngokubanzi kumashishini ahlukeneyo ngenxa yezi zakhiwo kunye nokuguquguquka kwayo kwizicelo ezahlukeneyo.
3004 Ialuminiyam idla ngokuqulatha malunga 1% manganese kunye 1% imagnesium, ukwandisa amandla ayo kunye nokumelana nomhlwa. Yomelele kuno 3003 i-alloy kodwa ine-ductility esezantsi.
| Isiqalelo | Uluhlu lwepesenti |
| Aluminiyam | 95.5-98.2% |
| Magnesium (Mg) | 0.8-1.3% |
| IManganese (Mnu) | 1.0-1.5% |
| Chromium (Cr) | 0.05-0.25% |
| Intsimbi (Fe) | max 0.7% |
| Isilicon (Kwaye) | max 0.3% |
| Ubhedu (Cu) | max 0.25% |
| Zinc (Zn) | max 0.25% |
| I-Titanium (Kwe) | max 0.15% |
| Ezinye izinto | max 0.05% |
| Ukutyunjwa koMoya | Iinkcazelo |
| H19 | Uxinzelelo lwenziwe lukhuni kwaye luthintelwe kancinci |
| H18 | Uxinzelelo luqina kwaye lufakwe ngokupheleleyo |
| O | Imeko eyongezelelweyo |
Itheyibhile yemilinganiselo
| Ukutyeba (mm) | Ububanzi (mm) | Ubude (mm) | IiNdlela zokuNyangwa koMphezulu |
| 0.2 – 6 | 500 – 2800 | 1000 – 12000 | Mill Gqiba, Ilungisiwe, Ibrashi, njl. |
| Ubungakanani (Impiriyali) | Ubungakanani (Metric) |
| 4×8 | 1000 x 2000mm |
| 4×10 | 1250mm x 2500mm |
| 48×96 | 1220×2440 |
| … | … |
3004 Icwecwe leAluminiyam lisetyenziswa kwi:
3004 Aluminiyam ilungele iitoti zesiselo ngenxa yamandla ayo aphezulu, ukubumbeka, kunye nokusebenziseka kwakhona.
Itheyibhile yokuPakisha izinto eziluncedo
| Iingenelo | Inkcazo |
| Amandla aphezulu | Ukuqina kwimveliso yetoti |
| Ukwandiswa okuphezulu | Ukuqulunqwa kweemilo ezinzima |
| Ukurisayikilisha | Indawo intle |
3004 Icwecwe leAluminiyam yePhepha isetyenziselwa ukuhlobisa kwangaphandle ngenxa yamandla ayo kunye nokuxhathisa ukubola.
Isetyenziswe kwiindawo zokuvelisa ezifuna zombini amandla kunye nokuchasana nokubola.
| Ipropati | Ixabiso |
| Ukuxinana | 2.72 g/cm³(0.0983 lb/ngaphakathi³) |
| Tensile strength | >= 160 MPa @Ukutyeba 6.35 – 76.2 mm |
| Unikeze Amandla | >= 62.0 MPa @Ukutyeba 6.35 – 76.2 mm |
| Imodyuli yeElasticity | 70 GPA |
| Umlinganiselo wePoisson | <= 0.35 |
| Ukwandiswa ngexesha lekhefu | 7.0 % @Ukutyeba 6.35 – 76.2 mm |
Phawula: Umthombo weDatha.
Itheyibhile yokuThengisa ukuBunjwa kunye neePropati
| Uphawu | 3004 Aluminiyam | 3003 Aluminiyam |
| Ukuqamba (Mn%) | 1.0 – 1.5 | 1.0 – 1.5 |
| Ukuqamba (Mg%) | 0.8 – 1.3 | – |
| Ukuqulunqwa | Ngcono kancinci | Eyakheke kakhulu |
| Ukunyangwa kokuMhlwa | Kungcono emanzini anetyuwa | Kulungile |
| Amandla | Phezulu | Ngasezantsi |
3004 I-Aluminiyam ishushu iqengqeleke, ngelixa 3003 ingaphoswa kwaye ishushu isongwe. 3004 isetyenziselwa iitoti zesiselo, ukwakha iifacade, kunye neetanki zokugcina, kanti 3003 isetyenziselwa abapheki, abatshintshi bobushushu, kunye neepaneli zophahla.
1. Intshayelelo 3003 aluminiyam……
1. Intshayelelo Njengeshishini……
Intshayelelo Ehlabathini le……
8011 H18 blister aluminiyam fo.......
Intshayelelo ku 1050 Epoxy C……
1. Intshayelelo 8011 Embosse……
UHenan Huasheng Aluminium Co., Ltd (HHALU ngokufutshane), isekwe kwi 2001, ibekwe kwidolophu yaseHuiguo, iAluminiyam eyinkunzi edumileyo yePhondo laseHenan, Ngumvelisi oqeqeshiweyo kwaye uzibandakanya kuphando, uphuhliso, imveliso, ukuthengisa kunye nenkonzo ye aluminiyam ipleyiti yephepha, ikhoyili ye-aluminium, ifoyile yealuminiyam, aluminiyam strip kunye nesangqa aluminiyam.
Ukwengeza, I-HHALU iphinda ithengise ipleyiti ye-aluminium yokwakha kunye neenqanawa, ipleyiti yesipili yealuminiyam, kunye nepleyiti yealluminiyam yemoto.
No.53, Indlela yaseDongming, Zhengzhou, Henan, eTshayina
Copyright © Huasheng Aluminiyam 2025. Onke Amalungelo Agciniwe.
