Nhanganyaya ku 1100 Aluminium sheet & ndiro
The 1100 aluminium sheet uye ndiro ndeyemhuri yekutengeserana yakachena ine hushoma hwe 99.0% aluminium. Iri giredhi rinozivikanwa nekunyanya kusaita ngura, magetsi conductivity, uye thermal conductivity. Hunhu hwayo hunoita kuti ive yakakosha kune akasiyana maindasitiri, architectural, uye maapplication ekushongedza. Heino sumo inovhara zvimiro zvayo, applications, uye zvigadziro zvekugadzira:
Properties
- Kuchena: Iyo yakakwira aluminium yemukati (99.0% miniminimum) inopa kwakanakisa corrosion resistance, kuita kuti igare yakasimba munzvimbo dzakasiyana siyana.
- Formability: 1100 aluminium inogona kuumbwa zviri nyore kuita akasiyana maumbirwo, zvichiita kuti zvive zvakasiyana-siyana kune zvakasiyana-siyana zvekugadzira maitiro.
- Weldability: Iyo inoratidza yakanakisa weldability ine akawanda welding matekiniki, kunyange zvazvo simba paweld points ringave rakaderera pane dzimwe nzvimbo.
- Conductivity: Inozivikanwa nekuve neiyo yakanyanya kupisa uye magetsi conductivity pakati pealuminium alloys, zvichiita kuti zvive zvakanaka kune zvikumbiro zvinoda izvi zvivakwa.
- Simba: Kunyange zvazvo isiri iyo yakasimba yealuminium alloys, simba rayo rinogona kuwedzerwa kuburikidza nekushanda kunotonhora. Zvisinei, haigoni kupisa kupisa kuwedzera simba, kusiyana nemamwe maaluminium alloys.
Mafungiro ekugadzira
- Kutonhora Kushanda: 1100 aluminium inonyanya ductile, kuita kuti ive yakakodzera kugadzira maitiro. Inoomesa zvishoma nezvishoma kupfuura mamwe alloys, kubvumira kuumbwa kwakawanda.
- Welding: Inoonekwa seyakanakira welding, inogona kuvezwa nyore nyore nehunyanzvi hwakasiyana seTIG, ME, uye kuramba weldingasi iyo tekinoroji uye yekuzadza zvinhu zvinofanirwa kusarudzwa nekuchenjera kuti ive nechokwadi chekuvimbika kweiyo weld.
- Anodizing: Kunyange zvazvo inogona kuve anodized kuwedzera kuoma kwepamusoro uye kudzivirira, iyo inoguma yekupedzisira inogona kunge isiri yakafanana kana yakasimba senge mamwe maaruminiyamu alloys.
Zvinotsanangurwa zve 1100 Aluminium sheet & ndiro
| Alloy |
Temper |
Ukobvu (mm) |
Upamhi (mm) |
Urefu (mm kana Coil) |
Surface Finish |
Mataurirwo Akaitwa |
| 1100 |
O, H14, H24, H18 |
0.20 ku 6.0 |
20.0 ku 2,600 |
1,000 ku 4,000, kana Coil |
Mill Finish |
GB/T 3880, ASTM B209 |
Mechanical Properties:
| Temper |
Ultimate Simba Rm/MPa |
Goho Simba Rp0.2/MPa |
Elongation Min. % |
| O |
88 |
29 |
32 |
| H14 |
130 |
110 |
8.2 |
| H24 |
130 |
110 |
3.9 |
| H18 |
170 |
150 |
5.5 |
Kuumbwa Kwemakemikari:
| Element |
Aluminium (Al) |
Silicon (Uye) |
Iron (Fe) |
Mhangura (Cu) |
Manganese (Mn) |
Zinc (Zn) |
Remainder Imwe neimwe |
Remainder Total |
| muzana |
>= 99 % |
<= 1.0 %(Hongu+Kutenda) |
<= 1.0 %(Hongu+Kutenda) |
0.050 – 0.20 % |
<= 0.050 % |
<= 0.10 % |
<= 0.050 % |
<= 0.15 % |
Physical Data:
- Density (20°C): 2,710 kg/m³
- Melting Point: 643°C
- Thermal Kuwedzera (20°C ~100°C): 24 µm/m-K
- Modulus yeElasticity: 69 GPa
- Thermal conductivity (Temper O): 220 W·m-1·K-1
- Electrical Resistivity (Temper O): 0.0292 x10^-6 Ω·m
- Conductivity (Temper O): 59 %IACS
Aya ma specifications anoita 1100 Aluminium yakakodzera kushandiswa kwakasiyana-siyana, kusanganisira kushandiswa kwese, makemikari, chikafu nechinwiwa, ornamental, uye thermal applications.
Zvikumbiro zvakajairika zve 1100 aluminium sheet & ndiro
The 1100 aluminium sheet uye ndiro zvinoshandiswa zvakanyanya nekuda kwekunaka kwavo kuumbwa, corrosion resistance, uye conductivity yemagetsi. Heano mamwe maapplication akajairika:
1. Zvokudya & Chemical Industry
- Cookware uye midziyo yekicheni: Nekuda kwekugona kwayo kupikisa ngura uye kuchengetedzwa mukubata chikafu.
- Mishonga yemakemikari: Kupokana kwayo nekurwisa kwemakemikari kunoita kuti ive yakakodzera kune midziyo uye mapaipi mumakemikari ekugadzira makemikari.
2. Zvemagetsi & Thermal Applications
- Makondakita emagetsi: Iyo alloy's high magetsi conductivity yakanakira kushandiswa mumatambo emagetsi uye conductor zvinhu.
- Heat exchangers uye kutonhora masisitimu: Kubatsirwa kubva kune yakanakisa thermal conductivity, 1100 aluminium inoshandiswa muzvishandiso zvinoda kunyatsopisa kupisa.
3. Architectural & Decorative
- Kuvaka mafacade uye denga: Kuramba kwayo kwecorrosion uye aesthetic kukwezva kunoita kuti ive yakakodzera kune ekunze ekuvaka zvinhu.
- Interior design: Zvekushongedza zvinhu, kusanganisira madziro emadziro, zvigadziriso zvemwenje, uye mamwe mataurirwo emukati umo kutaridzika kwayo uye kuramba kune oxidation kunokosheswa.
4. Packaging
- Kurongedza chikafu nemidziyo: Iyo isiri-chepfu uye kushorwa kwayo kunoita kuti ive yakachengeteka kune yakananga kusangana nechikafu, inobatsira mumaindasitiri ekurongedza chikafu.
5. Motokari uye Kutakura
- Nameplates uye maindasitiri ekudzivirira: Kugara kwayo uye kuumbwa kwayo kunobatsira pakugadzira nameplates, nepo zvimiro zvayo zvinopisa zvichibatsira pakuisa zvikumbiro.
- Reflectors: Inoshandiswa kune yayo inopenya zvivakwa mumarambi uye marambi.
6. Kudhinda uye Masaini
- Kudhinda ndiro: Iyo alloy's surface inogona kugadziriswa kugadzira tsanga yakanaka inobata inki zvakaenzana, kuita kuti ive yakakodzera kudhinda kwe lithographic.
- Zviratidzo uye zvikwangwani: Kukwanisa kwayo kutsungirira mamiriro ezvakatipoteredza kunoita kuti ive sarudzo yakanaka yekunze kwezviratidzo.
7. General Manufacturing
- Spun hollowware: Yakagadzirwa zvakanyanya, inoshandiswa kugadzira zvakadzama, zvakarukwa kana kuti zvakadzika-kudhonzwa hollowware semapoto, mapani, uye zvinhu zvekushongedza.
- Ductwork uye HVAC zvikamu: Kuumbwa kwayo kwakanakisa uye kusagadzikana kwemarara kunoita kuti ive yakakodzera kupisa, kufefetedza, uye air conditioning zvikamu.
Sarudza ukobvu hwakakodzera uye saizi ye 1100 Aluminium sheet & ndiro yeprojekti yako
Kusarudza ukobvu uye saizi yakakodzera yako 1100 Aluminium sheet uye ndiro zvinoenderana nezvinodiwa zveprojekiti yako. Hezvino zvimwe zvinhu zvokufunga nezvazvo:
Project Zvinodiwa:
- Tsigiro Yezvimiro: Kana iyo aluminium pepa iri kushandiswa kune zvimiro, saizi yakakora ingave yakakodzera.
- Aesthetic Appeal: Zvekushongedza zvikumbiro, ukobvu hunogona kusiyana zvichienderana nechitarisiko chaunoda.
- Formability: Mashizha matete anonyandurika uye ari nyore kuumba kuita zvimiro zvakaoma.
Common Ukobvu:
- Mapepa Matete: Kazhinji kubva 0.2 mm kuti 3 mm. Inokodzera maapplication anoda kuumbwa kwepamusoro.
- Medium Sheets: Range kubva 3 mm kuti 6 mm. Ipa chiyero pakati pesimba uye kuumbwa.
- Makobvu Plates: Kupfuurisa 6 mm. Inoshandiswa kune maapplication anoda simba repamusoro uye kushoma kukotama.
Saizi Kufunga:
- Standard Sizes: Aluminium mapepa anouya muhukuru hwakakwana, asi inogonawo kuchekwa kune zvidimbu zvetsika.
- Waste Minimization: Sarudza saizi inoderedza marara zvichienderana nekurongeka kwezvikamu zvako.
Kusarudzwa kwehasha:
- Soft (O): Yakagadzirwa zvakanyanya, yakakodzera kune dzakaoma dhizaini.
- Semi-zvakaoma (H14): Kuenzanisa kwakanaka kwechimiro uye simba.
- Zvakaoma (H18): Zvishoma kuumbwa, simba rakakwirira.
Finish Type:
- Mill Finish: Yakajairika kune inoshanda maapplication.
- Polished Finish: Inofarirwa nekuda kwekushongedza.
