| Tsanangudzo | Range kana Options |
| Ukobvu | 0.2mm kusvika 250mm |
| Upamhi | 500 mm kuti 2500 mm |
| Urefu | 1000 mm kuti 12000 mm |
| Temper | O, H111, H32, nevamwe (H12 kusvika H38) |
| Surface Treatment | Kukuya, kukwenenzvera, kukwesha, anodizing, etc. |
Aluminium alloys anozivikanwa nekusiyana-siyana uye simba-kusvika-uremu reshiyo, kuvaita sarudzo yakakurumbira mumaindasitiri akasiyana siyana. Pakati peizvi alloys, the 5454 Aluminium Sheet Plate inomira kunze nekuda kwesimba rayo repamusoro, yakanakisa corrosion resistance, uye chimiro chepamusoro. Chinyorwa ichi chinotarisa kune chaiwo eiyo 5454 Aluminium Sheet Plate, zvayakanakira, specifications, mechanical properties, applications, nezvimwe.
The 5454 Aluminium Sheet Plate ndeye yakakwirira-simba aluminium-magnesium alloy iyo inoshandiswa zvakanyanya mukuvaka ngarava uye maindasitiri ezvekufambisa.. Iyo inozivikanwa nekugona kwayo kusaita ngura, kunyanya mumvura yegungwa nedzimwe nzvimbo dzinoita ngura, zvichiita kuti zvive zvakanaka kune zvikumbiro zvegungwa.
Mushonga wemakemikari we 5454 aluminium sheet plate yakakosha kune yayo maitiro ekuita. Heino rondedzero yakadzama:
| Component Element | Metric Percentage Range |
|---|---|
| Aluminium (Al) | 94.4 – 97.1 % |
| Chromium (Cr) | 0.05 – 0.20 % |
| Mhangura (Cu) | ≤ 0.10 % |
| Iron (Fe) | ≤ 0.40 % |
| Magnesium (Mg) | 2.4 – 3.0 % |
| Manganese (Mn) | 0.50 – 1.0 % |
| Zvimwe, chimwe nechimwe | ≤ 0.05 % |
| Zvimwe, zvachose | ≤ 0.15 % |
| Silicon (Uye) | ≤ 0.25 % |
| Titanium (Of) | ≤ 0.20 % |
| Zinc (Zn) | ≤ 0.25 % |
The 5454 aluminium sheet sheet inopa huwandu hwemabhenefiti ayo anoita kuti ive sarudzo inosarudzika kune akawanda maapplication:
The 5454 aluminium sheet plate inowanikwa mumhando dzakasiyana siyana, widths, uye marefu, uye inogona kupihwa mumhando dzakasiyana:
| Tsanangudzo | Range kana Options |
| Ukobvu | 0.2mm kusvika 250mm |
| Upamhi | 500 mm kuti 2500 mm |
| Urefu | 1000 mm kuti 12000 mm |
| Temper | O, H111, H32, nevamwe (H12 kusvika H38) |
| Surface Treatment | Kukuya, kukwenenzvera, kukwesha, anodizing, etc. |
Kunzwisisa ma mechanical properties ye 5454 aluminium sheet plate yakakosha pakuona kukodzera kwayo kune akasiyana maapplication, since the mechanical properties of 5454 alloys of different temperatures vary greatly, taking the O state as an example, the following table shows the mechanical properties of 5454-O:
| Mechanical Property | Metric Value | Conditions/Comments |
|---|---|---|
| Kuoma, Brinell | 62 | AA; Typical; 500 g load; 10 mm bhora |
| Kuoma, Knoop | 85 | Converted from Brinell Hardness Value |
| Kuoma, Vickers | 72 | Converted from Brinell Hardness Value |
| Tensile Simba, Ultimate | 248 MPa | AA; Typical |
| 41.0 MPa | @ 371 °C / 700 °F | |
| 75.0 MPa | @ 316 °C / 601 °F | |
| 115 MPa | @ 260 °C / 500 °F | |
| 150 MPa | @ 204 °C / 399 °F | |
| 200 MPa | @ 149 °C / 300 °F | |
| 250 MPa | @ -28.0 °C / -18.4 °F | |
| 250 MPa | @ 24.0 °C / 75.2 °F | |
| 250 MPa | @ 100 °C / 212 °F | |
| 255 MPa | @ -80.0 °C / -112 °F | |
| 370 MPa | @ -196 °C / -321 °F | |
| Tensile Simba, Yield | 117 MPa | AA; Typical |
| 29.0 MPa | @ 371 °C / 700 °F | |
| 50.0 MPa | @ 316 °C / 601 °F | |
| 75.0 MPa | @ 260 °C / 500 °F | |
| 105 MPa | @ 204 °C / 399 °F | |
| 110 MPa | @ 149 °C / 300 °F | |
| 115 MPa | @ -80.0 °C / -112 °F | |
| 115 MPa | @ -28.0 °C / -18.4 °F | |
| 115 MPa | @ 24.0 °C / 75.2 °F | |
| 115 MPa | @ 100 °C / 212 °F | |
| 130 MPa | @ -196 °C / -321 °F | |
| Elongation paBreak | 25 % | @ 24.0 °C / 75.2 °F |
| 27 % | @ -28.0 °C / -18.4 °F | |
| 30 % | @ -80.0 °C / -112 °F | |
| 31 % | @ 100 °C / 212 °F | |
| 39 % | @ -196 °C / -321 °F | |
| 50 % | @ 149 °C / 300 °F | |
| 60 % | @ 204 °C / 399 °F | |
| 80 % | @ 260 °C / 500 °F | |
| 110 % | @ 316 °C / 601 °F | |
| 130 % | @ 371 °C / 700 °F | |
| 22 % | @ Thickness 1.59 mm / 0.0625 mu | |
| Modulus yeElasticity | 70.3 GPa | AA; Typical; Avhareji yemakakatanwa uye kudzvanywa. Compression modulus is about 2% greater than tensile modulus. |
| Notched Tensile Strength | 221 MPa | 2.5 cm width x 0.16 cm thick side-notched specimen, Kt = 17. |
| Ultimate Bearing Strength | 427 MPa | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 165 MPa | Edge distance/pin diameter = 2.0 |
| Pisces Ratio | 0.33 | Estimated from trends in similar Al alloys. |
| Kuneta Simba | 120 MPa | @ 5.00e+8 cycles; unnotched R. R. Moore rotating beam |
| Shear Modulus | 26.0 GPa | Estimated from similar Al alloys. |
| Shear Simba | 159 MPa | AA; Typical |
This table provides a comprehensive overview of the mechanical properties of the 5454 alloy, including hardness, tensile simba, elongation, modulus of elasticity, nezvimwe, under various conditions and temperatures. The “Conditions/Comments” column provides additional details about the specific test parameters or the nature of the property measurement.
The 5454 aluminium sheet sheet inowana kushandiswa muhuwandu hwakawanda hwekushandisa nekuda kwekusanganiswa kwayo kwezvivakwa:
Iyo 5454-H32 aluminium sheet plate inoshandiswa kutangidzira matangi uye mota dzetangi dzakakwenenzverwa, inopa kuchinjika kune nharaunda dzinoora:
| Property | Value |
| Tensile Simba | 276 MPa |
| Goho Simba | 207 MPa |
| Modulus yeElasticity | 70.3 GPa |
| Elongation paBreak | 18%
@Temperature 24.0 °C |
| Kuoma | 73 Brinell |
The 5454 H111 aruminiyamu sheet plate inorapwa kupisa-yepamusoro simba uye yakaderera ductility, yakakodzera zvivakwa zvegungwa uye midziyo yekumanikidza:
| Property | Value |
| Tensile Simba | 262 MPa |
| Goho Simba | 179 MPa |
| Modulus yeElasticity | 70.3 GPa |
| Elongation paBreak | 14%
@Ukobvu 1.59 mm |
| Kuoma | 70 Brinell |
The 5454 O aluminium sheet plate, mu annealed state, inopa yakakwirira ductility uye yakanaka formability:
| Property | Value |
| Tensile Simba | 165 MPa |
| Goho Simba | 65 MPa |
| Modulus yeElasticity | 70 GPa |
| Elongation paBreak | 25% |
| Kuoma | 62 Brinell |
The 5454 Aluminium inozivikanwa nemhando dzakasiyana siyana, iyo inogona kunge iine misiyano mishoma mumagadzirirwo ekugadzira kana kushivirira:
Izvo zvakakosha kuti utarise iwo chaiwo chiyero chinodiwa pachikumbiro chako kuti uve nechokwadi chekuti zvinhu zvinosangana nezvinodiwa.
Kuti uwane mimwe mibvunzo, tsanangudzo dzakadzama, kana kuisa odha, kubata Huasheng Aluminium, yako yakavimbika '5454 Aluminium Sheet Plate’ fekitari uye mutengesi. Chikwata chedu chenyanzvi chakagadzirira kukubatsira nezvose zvaunoda aluminium.
Nhanganyaya 1060 Aluminium ……
Nhanganyaya: PaHuasheng Al…
Nhanganyaya Aluminium alloy ……
Nhanganyaya 1070 Aluminium ……
Nhanganyaya ku 3004 Aluminium……
Nhanganyaya Kugamuchirwa kuHuas……
Henan Huasheng Aluminium Co., Ltd (HHALU kwenguva pfupi), yakasimbiswa mu 2001, iri muHuiguo Town, iyo yakakurumbira Aluminium capital yeHenan Province, Inyanzvi yekugadzira uye inobata mukutsvagisa, development, production, kutengesa uye sevhisi yealuminium sheet plate, aluminium coil, aluminium foil, aluminium strip uye aluminium denderedzwa.
Pamusoro pe, HHALU inotengesawo aluminium ndiro yekuvaka uye ngarava, aluminium mirror plate, uye motokari aluminium alloy plate.
No.53, Dongming Road, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2023. Kodzero dzese dzakachengetwa.
