1. Gabatarwa

Aluminum tsare na cakulan cakulan shi ne matsayin masana'antu don adana dandano, tsari da roko na gani a kan sarkar samar.

Cakulan yana da matukar hankali ga oxygen, danshi, Haske da balaguron zazzabi; Rufewar da ke kare mai ƙanshi da rubutu, Yana hana kitse, kuma yana gabatar da mahimmancin alama.

Wannan labarin yana kawo zurfi, Binciken horo mai yawa - Kimiyyar Kayan Aiki, masana'antu, shamaki yi, zabi tsirar, Gudanar da sarrafawa da dorewa - kuma ya haɗa da bayanai da yawa da shawarwarin amfani don injiniyoyi masu rufi, Manajan Samfuran Samfurin da CO-PACKERS.

Aluminum tsare na cakulan cakulan

2. Sihiri na kayan Cakulan Chocolate

Aikin Kayan Alineum a cikin Wankalin Cakulan mai tushe daga kayan yau da kullun, wanda ya ayyana halaye na mabuɗin kamar yadda aka kunna, tsari, aminci, da jituwa tare da layin kundin kayan masana'antu.

2.1 Maki na aluminium tsare na cakulan cakulan

AA1235 Aluminum Loil (Tsoro ≥ 99.35%)

• Mafi yawan gama gari Don cakulan tare da sutura
• Matsanancin -ushi (Ya fushi) Don kyakkyawan sassauci da kuma m rufewa
• Mafi girma pinhole juriya a gauuges na bakin ciki
• Ƙananan matakan fe da si, Rage karfin gwiwa

AA1145 Aluminum Loil (Tsoro ≥ 99.45%)

• Girman kai fiye da AA1235
• Kyakkyawan juriya na lalata
• Amfani lokacin da ake buƙatar inferness na sinadarai (misali, Primulan Cakulan)

AA8011 Aluminum Soleil (Al-fe-sighoy)

• Amfani a wasu hanyoyin da ake buƙata mafi girma
• Ya ƙunshi 0.5-1% fe, 0.3-0.8% Ee
• Ba a matsayin sassauƙa azaman jerin 1xxx amma yana ba da ingantaccen ƙarfin injin don samar da saurin gudu

2.2 Aluminum tsallake farin ciki zabi

Kauri mai mahimmanci ne mai mahimmanci, aikin inji, da tsada. Tsarin kauri na Kulawar Cakulan na Cakulan sun hada da:

6-9 μm (Utra-na bakin ciki)

• Amfani da babban girma, cakulan cakulan cakulan
• Mafi sassauci mafi girma
• Dan kadan karuwar hadarin pinholes
• Mafi kyawun injunan da aka kunna

10-12 μm (Premium a cikin tsare tsare)

• Yunƙuri da aka fi amfani da kauri don sandar cakulan
• Daidaitaccen ma'auni na:
  • Kaddarorin shinge
  • Pold Nemo
  • Ƙarfi
  • Farashin
• Kyakkyawan aiki da daidaitaccen tsari

12-20 μm (Ado ko embossed freils)

• Amfani da cakulan alatu da fatun
• Yana goyan bayan tsarin ci gaba
• Babban juriya na inji
• Ya dace da hannun jari ko kuma cakulan na otal

Kauri vs. Ayyukan Shamaki (M)

2.3 Rufi & lacquers (Ayyuka na gama gari)

• Lacquers na zafi: Sanya secketic na Hermetic lokacin da aka yi amfani da tsare a matsayin babban abin da ke ciki (sau da yawa ana amfani da shi a kan gefen saduwa da abinci ko a kan masu adawa da jakar PE a Lamates). Hatalin wuta mai zafi yana da mahimmanci don murkushe masu gudana da kuma matashin kai.
• Abinci na abinci na abinci / varnishes: Samar da haramtaccen shinge tsakanin cakulan da karfe (amfani da zaba a inda ake cigaba da dandano). Lacquers dole ne wanda ba macijin ba da kuma yarda da ka'idojin-abinci.
• Buga masu siyarwa & Fiye da varnnishes: Inganta tawada na tawada da kuma scratch juriya na waje kayan ado surface.
• Anti-tarnish / maganin anti-lan: Tsawaita shelf gabatarwa don m ƙarfe da ba a rufe shi ba.

1235 Aluminum face face

2.4 Yarda da Tsaron Abinci

Aluminum Capila da aka Amfani Don Cakulan Chocolate dole ne ya cika:

• EU 1935/2004 (kayan da aka yi niyya don sadarwar abinci)
• IN 602 (Aluminum da Aluminum mai aluminum)
• FDA 21 Cfr 175.300 (Resinous da polymicic iclerica)
• ISO 21469 (Abubuwan da ake buƙata na Lillricants da aka yi amfani da su a masana'antu)

3. Fa'idodi na kayan kwalliya na kayan cakulan

3.1 Babban katuwar shinge

• Haske: Yana hana hasken iskar shawa da canje-canje mai launi.
• Oksijen: Kusan-ze Permenabilan oxygen ya adana volatile dandano na dandano da jinkirin Rancidication-muhimmancin cikawa don ƙwanƙwaran ƙwanƙwasa.
• Danshi da ƙanshi: karamin musayar danshi da oroma riƙe lokacin da aka rufe ta da kyau.

Nuna bayanai: Ci gaba mai aluminum na iya rage watsa oxygen da ya wuce 0 cm³ / m²ho (a zahiri), Ganin cewa kayan aikin polymer na iya samun umarnin otrs na girma (misali, Pet ~ 1-10 cm³ / M²hoon ya dogara da kauri).

3.2 Haske mai sauƙi da kuma sassauƙa

• Abu ingancin: 10 μm foil yana da taro mai yawa ≈ 27 g/m² (2.7 g / cm³ × 0.001 IKoko kauri). Wannan ya samar da ƙarancin nauyi ƙari da mashaya kuma yana ba da gudummawa ga ƙananan jigilar kaya.
• Tabbatar da tsari: Tsare-tsare na ruwa, rage girman aljihunan iska waɗanda ke hanzarta lalata.

3.3 Tasiri

• Ingantaccen tsari da manyan hanyoyin yanar gizo suna rage farashin farashi. Babban faɗuwar ya amfana daga webs mai rufi ko kuma aka buga don kawar da matakan kare sakandare. Layin da ke sarrafawa na iya samun ragin scrap, da kuma murfin matsakaici na zamani suna gudana a ɗaruruwan kunshi a minti daya (Ya danganta da injin).

3.4 Kokarin Raba da Alamar Samfura

• Da ƙarfe na ƙarfe, embosing da kintsattsi na ninka sadarwa ta musamman. Fole yana ba da damar haɗuwa da ƙarfe tare da bugu mai girma akan webs na waje don shakatawa na yau da kullun.

3.5 Zaɓuɓɓukan masu ƙaunar muhalli

• Maimaituwa: Aluminum yana da iyaka; Kirkirar aluminum na amfani da amfani ≈ 95% Kadan kuzari fiye da firam na asali. Tsararren Mono-DINA (tsare + PE) na iya inganta sake dubawa dangane da takarda ga takarda / filastik / fannoni.
• Maimaitawa abun ciki: Masu ba da kuɗi na iya samar da abubuwan da ke cikin gida ko kuma bayan abin da aka sake amfani da shi zuwa ƙananan carbon.

Abvantbuwan amfãni na aluminium tsare don cakulan cakulan

4. Tsarin gine-gine & Laminates amfani da cakulan

Jawabin cakulan yana buƙatar ikon sarrafawa shamaki yi, injiniya, tsari, kuma Gabatarwa.

Saboda tsarkakakkun tsare aluminium yana da bakin ciki sosai kuma mai laushi a cikin kyawawan cakulan-marufi (6-20 μm), Masu kera galibi suna haɗu da shi tare da takarda, finafinan polymer, ko kwalliya na musamman don ƙirƙirar laminates inganta.

Injiniya suna tsara waɗannan hanyoyin don samar da kariya da yawa yayin samarwa, rarrabuwa, da kuma dillali nuni.

5. Masana'antu na kayan aluminium na aluminium na kayan cakulan

5.1 Raw kayan aiki

1. Karin Fasto: Iris na aluminum (1235 ko 8011 gami) ana jefa a 700 ° C, tare da tsauraran tsarin sarrafawa (misali, Fec..05% na 8011).
2. Hot Rolling: An yi birgima cikin kwanaki 3-5mm lokacin zanen gado a 400 ° C, Rage kauri ta 90% Ta hanyar abubuwa da yawa.
3. Cold Rolling: Ana kara yiwa zanen gado zuwa 0.1-0, tare da matsakaici angealing (350° C don 2 hours) don kula da bututu.
4. Tsare rollling: Zazzage zanen cokali mai sanyi a cikin ƙoshin ƙasa, Tare da kauri ya ragu zuwa 6-15 microns. Za a birgima zanen gado biyu (Tandem Rolling) Don cimma ajiyar kayan aiki, sannan rabu.

5.2 Shafi da jiyya na samaniya

1. Tsaftacewa: Gobali sun cika da alkaline mafita don cire mai mirgine mai, Tabbatar da kayan adesion.
2. Aikace-aikacen Rufi: Anti-Stick (kakin zuma / acrylic) ko shinge (PVDC / PLA) Ana amfani da mayafi ta hanyar gravure ko graot-dia, Tare da kauri mai sarrafawa zuwa ± 0.5 GSM.
3. Bushewa / Cuting: Ma'aikata sun bushe kakin zuma-mai rufi da 80-120 ° C ko warkar da kayan kwalliyar acrylic da hasken UV, Tabbatar da abubuwan da ake jujjuyawar tsayawa a tsakanin iyakokin FDA (≤5 mg / m²).

5.3 Bugawa da Embossing

1. Bugawa: Fitar da sassauya na amfani da inks na-abinci (Mai yarda da FDA 21 Kashe na CFR 176.170) Don amfani da zane, Tare da daidaito na rajista ± 0.1mm don kwafin launi da yawa.
2. Embossing: FoILS wucewa ta hanyar da aka sanya rollers a 60-80 ° C, ƙirƙirar tsarin 3D tare da zurfin 5-10 microns. An sarrafa matsin lamba don kauce wa tsinkaye (yawanci 50-70 N / cm²).
3. Slitting da Rewinding: Masu aiki su tsallake da aka gama da shi zuwa ga abokan ciniki (100-1000 mm) kuma sake juya su a 76 mm cores don bayarwa.

6. Aikace-aikace na kayan aluminium na kayan cakulan

6.1 Mutum ya rufe

Amfani da truffles, cakulan, da kuma bonbons. 6-8 Micron Wax-Coated 1235 aluminum foil misali ne, Kamar yadda ya rufe sosai a kusa da siffofin da ba a sani ba.

Brands kamar Godiya suna amfani da kayan zinare na zinare don truffs truffles, Inganta daukaka kara. Wannan asusun aikace-aikacen don 35% na cakulan tsararru (Ka'idojin / Ka'idojin Contaging).

6.2 Hade da kaya

Sandunan cakulan da Allunan suna amfani da tsare a matsayin katangar ciki, da aka haɗu da takarda mai amfani. 10-12 micron 8011 aluminum foil (PVDC-Coated) na kowa, samar da kariya na danshi yayin da takarda ke ba da tallafi na tsari da sarari.

Misalai sun hada da madara na cadbury (Al / Takarwa Layinate) da kuma cakulan madara (Al / Pet / Pe Laminates).

6.3 Kayan aikin cakulan

Mafi girman asali (misali, Lindt kyau, Neuya) yi amfani 12-15 micron foils a cikin laminates tare da embossed ko masu launin cinye.

Lamuni na tsare a cikin akwatunan kyautar suna hana intrust na danshi daga kwali, Yayin da ƙarfe na ƙarfe a kan kwalaye na waje suna isar da alatu.

Likita na alatu 40% na cakulan leiil, Duk da lissafin kawai 15% na girma (ERUMONA).

7. Kwatanta da Sauran Kayan Marufi

8. Kammalawa

Aluminum Fati ya ci gaba da wuce gona da cakulan shamaki yi, sassauci, amincin abinci, Aesttawani, da sake yin amfani da su.

Daga mutum bonbons don kayan kwalliya, Ikonsa na karewa daga hadawa, Danshi Cire, hasara mai ƙanshi, da lalacewar jiki yana haifar da rayuwar shiryayye kuma yana tabbatar da ingancin samfurin.

Bangare ta hanyar Kimiyya ta Kimiyya, Fasahar masana'antu ta ci gaba, da abubuwan da aka dorewa, Aluminum tsare ya kasance abu mai mahimmanci a cikin masana'antar cakulan duniya.

Kamar yadda masu amfani da masu amfani suka tashi da alamomin neman mafi kyawun kayan aikin, Aluminum Loil zai ci gaba da samar da darajar da ba a kwance ba.

FAQs

Q1 - shine yanki mai aminci a cikin sadarwar kai tsaye tare da cakulan?

Ee. Abinci-sa kayan abinci aluminum face (misali, Ka'idodin EU 1935/2004, Shiryarwar abinci na FDA) bashi da lafiya don hulɗa kai tsaye tare da cakulan. Tabbatar da suturar kwalliya / Lacquers da adhereavers don ƙaura cikin abinci mai kyau.

Q2 - Abin da kuka fi kauri?

Babu wani lokacin kauri na duniya - sigogi na layi da kuma kayan kwalliya na kayan kwalliya - amma 8-12 μm abu ne na yau da kullun akan layin gudu; don abubuwa masu rauni ko kuma masu kulawa, 12-16 μm yana rage yiwuwar tunanin.

Q3 - Can Canjen Aluminum Dakatar da Mai Bloom?

FOIL yana rage abubuwan da suka haifar da kits na bloom ta toshe haske da oxygen; duk da haka, Rigakafin ra'ayoyin Bloom ya dogara da shi da farko don yin fushi, kirkirar, da kuma sarrafa zazzabi yayin ajiya da sufuri.

Q4 - sune Foil Lamunts?

Tsarkakakke kayan aluminum yana sake amfani. Haɗin kai (foil tare da shirye-shiryen ko shirye-shirye) suna da wahala a sake dawowa kuma sau da yawa suna buƙatar koguna; Zabi Mono-DINO-DINAM-RAYUWAR CIKIN MULKIN A CIKIN SAUKI.

Q5 - Wane gwaji ya kamata a yi akan fakitin cakulan ta amfani da tsare?

Yaba: Alamar amincin, oxygen & watsa danshi (inda ake iya amfani da shi), Gwajin ƙaura tare da mim, Tushen / Hawaye gwaji, An hanzarta gwaji na rayuwa (Haɗa T da Rh), da fants na penory don gano-dandano.

Q6 - Me yasa aka fi ƙarfin filastik don cakulan?

FOIL na kusa-Zero otr da MVTr tsawaita shiryayye rayuwa ta 2-4 sau, Yana hana bloating da rancidity, kuma tlocks haske-batutuwa filastik filastik (har ma) ba zai iya cikakken adireshin ba.

Q7 -Can aluminum fage a buga tare da inks abinci?

Ee. Fitar da sassauya na amfani da FDA-wanda ya dace da kayan aikin ruwa, tare da sermers tabbatar da tawada na anda kuma babu hijirarsa zuwa cakulan.