8011-H18 Aluminium Foil bakeng sa Pharmaceutical Packaging ke sesebelisoa sa mantlha se amohetsoeng ka bongata bakeng sa li-blister lidding, sekoahelo sa sachet, le meaho ea laminated foil e sebelisoang indastering ea meriana.
Ka H18 (e tletseng ka thata) bohale, motsoako ona o fana ka khanyetso e phahameng ea ho tenyo le ho phunya, botsitso bo botle ba dimensional meleng ea ho paka ka lebelo le phahameng, le tšitiso e ke keng ea qojoa ea oksijene, mouoane oa metsi, le leseli-lintho tsa bohlokoa ho sireletseng botsitso ba lithethefatsi le ho lelefatsa bophelo ba sethala.
Ka kakaretso, 8011-H18 aluminium foil e emela tharollo e leka-lekaneng e kopanyang ts'ebetso e matla ea thibelo, botšepehi ba mochine, le kamohelo ya taolo, ho etsa khetho e ratoang bakeng sa bahlahisi ba batlang ho tšeptjoa, scalable, le liphutheloana tsa meriana tse lumellanang le mefuta e mengata e fapaneng ea litekanyetso tse tiileng le tse tiileng.
8011-H18 Aluminium Foil
8011-H18 ke motsoako oa khoebo oa 8000-series foil foil alloy, e fanoang ka sefutho se batang ka botlalo H18 (e tletseng ka thata) bohale, e etselitsoe phetolo ea meriana e potlakileng (sekoahelo sa blister, sekoaelo sa sachet le foil ea laminated) moo ho hlokahalang hore ho be le mokoallo oa tšepe o sa khaotseng hammoho le ho phunya ho hoholo / ho hanyetsa ho taboha ka li-gauge tse tšesaane haholo.
Huasheng Aluminium Foil Tekanyo ea Botenya
| Element | Mefuta e tloaelehileng (wt %) | Karolo / hlahisa maikutlo |
|---|---|---|
| Aluminium (Al) | Ho leka-lekanya (~ ≥ 98.0 %) | Bulk matrix - e fana ka mokoallo le sebopeho. |
| Tšepe (Fe) | ~0.50 – 1.2 | Ho se hloeke ho tloaelehileng ho tsoa ho li-alloys; e laoloang bakeng sa boleng ba foil. |
| Silicone (Le) | ~0.20 – 0.80 | Ho se hloeke; e susumetsa boitšoaro ba ho thella le metjhini. |
| Manganese (Mong) | ~0.05 – 0.30 | Keketso e nyane bakeng sa taolo ea lijo-thollo le botsitso ba matla. |
| Magnesium (Mg) | ≤ 0.10 | Hangata e tlase haholo 8011 (ho fapana le li-alloys tse 5xxx). |
| Koporo (Cu) / Zinki (Zn) | Trace (≤ 0.10) | E bolokoa e le nyane ho boloka kutu le thepa e thibelang. |
| Titanium (Ea), Ba bang | Trace | E laoloa ho boloka bokaholimo ba foil le ts'ebetso ea mochini. |
Molaetsa o sebetsang: 8011 e entsoe hore e be motsoako oa foil o nang le litšila tse tlase; meeli e nepahetseng e itšetlehile ka leloala le lihlahisoa tsa lihlahisoa. Bakeng sa tšebeliso ea meriana, hloka tlaleho e felletseng ea mantlha ea CoA.
Bakeng sa li-gauge tsa foil tse tšesaane haholo, liteko tse tloaelehileng tsa tensile/ chai li etsoa ho mehlala ea strip/coupon.; boits'oaro ba mochini bo angoa haholo ke nalane ea li-gauge le rolling.
| Thepa | Mefuta e tloaelehileng / example |
|---|---|
| Matla a Khopolo-kholo (UTS) | ~180- 260 MPa (boleng bo phahameng bakeng sa mosesaane, foil e sebetsang haholo) |
| Ho hlahisa Matla (haeba e tlalehiloe) | Ka tloaelo e phahame; maemong a mangata barekisi ba foil ba tlaleha "matla a bopaki" kapa ba itšetleha ka UTS & data elongation |
| Elongation (A) | ~0.5– 3 % (H18 e tletse ka thata - ductility e tlase) |
| Keledi / Ho Ts'oaea Haholo | E ntle - e phahame haholo ho feta bohale bo bonolo ka gauge e lekanang |
| Ho thatafala | Ha e sebelisoe hangata bakeng sa kamohelo ea foil, empa li-foil tse thata ka botlalo li bonts'a boema-fofane bo phahameng khahlanong le foil e kentsoeng |
Tlhaloso ea boenjiniere: H18 foil e matla 'me e hanela ho thehoa ha likoti nakong ea ho fetola le ho tlatsa, empa ha e khone ho huloa ka botebo - e ntlafalitsoe bakeng sa ho koahela (likhahla tse sephara) ho ena le hore e iketsetse mekoting.
| Thepa | Boleng bo tloaelehileng / Hlokomela |
|---|---|
| Botenya | ≈ 2.70 Gz ch⁻³ (joalo ka aluminium e akaretsang) |
| Thermal conductivity (hoo e ka bang.) | ~230 - 240 W·m⁻¹·K⁻¹ (mefuta e mengata ea aluminium) |
| Mocheso o khethehileng | ~880- 900 J·kg⁻¹·K⁻¹ |
| Lekhalo (botenya) - e tloaelehileng bakeng sa sekoahelo sa pharma | ~20 – 40 µm (20-25 µm e tloaelehileng bakeng sa sekwahelo sa lera le le leng; litekanyo tse teteaneng tse sebedisoang bakeng sa kganyetso e eketsehileng ya ho phunya kapa ho lamination ka mokgwa o batang) |
| Qetello ea bokaholimo | Mill finish, matt kapa e khanyang ho ipapisitse le ho roala le ho ikwetlisa; e lacquered bakeng sa ho tiisa le ho hatisa |
Hlokomela: mamello ea botenya, botenya ba bokaholimo le ho batalla ke tsa bohlokoa bakeng sa mechini ea blister - hlalosa boemo ba botenya ba per-reel le sebaka se lumelletsoeng se kantle ho bata..
Aluminium foil e fana ka ntho ea bohlokoa tšitiso ea tšepe e tsoelang pele.
Ts'ebetso e khethoa ke botšepehi ba foil (ho ba sieo ha masoba), lacquer / laminate tsamaiso le mefokolo.
Li-sachets tsa Pharmaceutical
8011-H18 ke foil e matla bakeng sa liphutheloana tsa mantlha tsa meriana hobane e kopanya mokoallo oa tšepe o ke keng oa qojoa o nang le ho phunya / ho lla ho matla ka li-gauge tse tšesaane haholo le boits'oaro bo tsitsitseng ba webo mehalang e fetohang ka lebelo le holimo..
8011-H18 Aluminium Foil bakeng sa Packaging ea Blister
Li-blister tse phunyeletsang li hloka sekoahelo se tla lula se tiile nakong ea ho tlatsa / ho tšoara empa ho lumella mokuli hore a phunye letlapa ntle le ho tabola laminate ka mokhoa o sa lebelloang..
8011-H18 hangata ke sekoaelo sa sekoaelo sa khetho hobane matla a phahameng a ho sebetsa a batang a H18 a fokotsa sekhahla sa sekoti mme a hana ho phunya ka lisebelisoa., lithako tsa letlapa le khatello ea maikutlo.
Kaho e tloaelehileng & likhakanyo
Liaparo le sebopeho sa tiiso
Mocheso-seal lacquer (Pvdc, acrylic, kapa li-lacquers tse khethehileng tsa pharma) e sebelisoa ho foil ho thusa ho tiisa hermetic ho theha marang-rang (PVC, PVC/PVdC, Lifilimi tse koahetsoeng ka PVdC).
Boima ba seaparo hangata bo fapana ho tloha ho ~1–6 g/m² ho itšetlehile ka k'hemistri ea lacquer le matla a hlokahalang a tiiso.
Aluminium Foil Strip Packaging
Packaging ea li-strip e bolela lithapo tse tsoelang pele tsa blister cavities le sekwahelo tse ka sebelisoang litsing tsa phepelo ea litekanyetso tsa yuniti kapa moo litekanyetso tse ngata li kenngoeng ka sehlopha se tsoelang pele..
Likhetho tsa boenjiniere
“Nako eohle” (foil e nang le serame) hangata e bolela meaho ea aluminium e nang le mekhahlelo e mengata e sebelisoang e le ho etsa marang-rang le joalo ka sekwahelo ka aluminium e felletseng. (foil/foile) lipakete tsa blister.
Li-foil tsa 'nete tse batang li hlahisoa ka li-alloys le bohale bo khethiloeng ductility e phahameng ho lumella ho hula ka botebo ka har'a mekoti (mohlala, motsoako o bonolo kapa bohale bo bobebe ho feta H18).
Pakete e tloaelehileng ea Alu-Alu e ka 'na ea e-ba le likarolo tse peli tsa aluminium tse kopantsoeng le likarolo tse tiisitsoeng.
Moo 8011-H18 e leng teng
Cold-Form 8011-H18 Aluminium Foil
Li-sachets tsa tekanyo ea unit bakeng sa phofo, lithethefatsi tse granular, li-semisolids le litokisetso tsa lihlooho. Foil e ka sebelisoa e le sekoahelo se tobileng kapa e le mokoallo oa mokoallo oa laminate.
Mehaho e tloaelehileng ea laminate
Li-liner tse koalang molomo oa botlolo (li-screw caps, libotlolo tsa dropper) le ho buleha ha lijana ho bontša bopaki ba ho senya le ho boloka bocha.
Tsena li tloaelehile bakeng sa phepo e nepahetseng le lijana tse ling tsa pharma liquid/semisolid.
Likhetho tsa boenjiniere
Ts'ebetso ea tlhahiso e khethehile haholo ho fihlela litlhoko tsa meriana:
1. Casting le Hot Rolling: The 8011 alloy e kenngoa ka har'a li-ingots 'me e chesehile ka li-coil tse teteaneng.
2. Cold Rolling: Thepa e phetoa khafetsa ho fihlela tekanyo e tšesaane ea ho qetela (hangata 20𝜇m ho 40 𝜇m ).
3. Ho halefa le ho halefa: The foil e annealed ho khalefo e lakatsehang (H18) ka mosebetsi o batang o laoloang.
4. Phekolo ea Bokaholimo: The foil feta degreasing le ho hloekisa ho etsa bonnete ba hore bokaholimo ba meriana.
5. Ho roala: Lacquer-seal-seal lacquer e sebelisoa hantle ka lehlakoreng le leng, 'me lesela la tšireletso la primer / print lacquer le sebelisoa ka lehlakoreng le leng bakeng sa khatiso.
6. Slitting le Tlhahlobo ea Boleng: Foil e feliloeng e arotsoe ho latela litlhaloso tsa bareki 'me e tlas'a maemo a thata le ho hlahlojoa boleng ba bokaholimo..
Liphutheloana tsa kantle ho naha bakeng sa meqolo e meholo ea foil ea aluminium
Lisebelisoa tsa ho paka tsa meriana li tlameha ho latela melao e thata ea machabeng ho netefatsa polokeho ea mokuli le katleho ea lithethefatsi..
•FDA (U.S. Tsamaiso ea Lijo le Lithethefatsi): E hloka lisebelisoa hore li bolokehe bakeng sa ho kopana ka ho toba le lithethefatsi.
•USP (United States Pharmacopeia) ⟨662⟩: E fana ka litekanyetso tsa likarolo tsa ho paka ka tšepe, ho kenyeletsa le liteko tsa tshebetso.
•EP (Pharmacopoeia ea Europe): E beha litekanyetso tsa lisebelisoa tse sebelisoang lijaneng tsa meriana.
•ISO 15378: E totobatsa litlhoko tsa lisebelisoa tsa mantlha tsa ho paka bakeng sa lihlahisoa tsa meriana, ho kenyelletsa GMP (Mokhoa o Molemo oa Tlhahiso).
| Ntho ea papiso | 8011-H18 | 8021 / 8079-H18 | 1235-O | Cold-form foil | 8011-e thehiloeng laminated foil |
|---|---|---|---|---|---|
| Tekanyo e tloaelehileng ea pharma (µm) | 20-40 (20-25 e tloaelehileng bakeng sa PTP) | 20-40 | 20-60 | 40-150 (ho etsa lera le letenya) | Foil lera 20-40 (laminate kaofela e fapana) |
| Matla a tšepe / elongation (mofuta.) | 180-260 MPA; bolelele. <3% | UTS ~ 170–240 MPa; bolelele. <3% | UTS ~70–140 MPa; bolelele. ~20–45% | UTS ~80–200 MPa; bolelele. >15-30% | E itšetlehile ka laminate; foil e fana ka rigidity |
| Formability | Ho koaheloa feela; ha e hohelwe | Ho koaheloa feela; ha e hohelwe | Draability e ntle haholo | Bokhoni bo botle bo tebileng ba sebopeho se batang | Lidding e ntle haholo; ho theha ho ipapisitse le moralo |
| Tšitiso ho O₂ / H₂O / kganya | Ha e le hantle, mokoallo oa tšepe o sa kenelleheng | Ha e le hantle e sa kenellehe | E sa kenelleheng | Tšitiso e felletseng ea tšepe ho isa ho tšepe | E laoloa ke lera la foil (mokoallo o phahameng haholo) |
| Ho tsilatsila / ho lumellana ha ho roala | E ntle ka li-lacquers tsa pharma (tiisitsoe) | E ntle; lacquer histori ea mofani oa thepa-e itšetlehileng ka eona | E hloka lacquer bakeng sa ho tiisa | Ka likarolo tse ka hare tsa sealant | E kgabane; likarolo tsa polymer seal seal/peel |
| Ho lumellana le sterilization | Gamma / EtO e ntle (e itšetlehileng ka lacquer); autoclave e ipapisitse le sistimi | E ts'oanang le 8011 | E tšoanang; li-coatings li tlameha ho netefatsoa | Ka kakaretso e ntle; netefatsa laminate e feletseng | E itšetlehile ka polymer & tsamaiso ea lacquer |
| Lisebelisoa tse tloaelehileng tsa pharma | Sekoaelo sa PTP blister, sekoahelo sa sachet, li-foil liner | Sekoahelo se seng sa blister | Li-cavities tse nang le serame, sekoaelo se itseng | Mahlaseli a Alu-Alu (ho bopa + Lits'oants'o) | Lipehelo, mahlaseli a peelable, mekotlana |
| Melemo ea bohlokoa | Ho hanyetsa ho phunya ho phahameng ka tekanyo e tšesaane; botsitso ba webo; ts'ebeliso ea pharma e netefalitsoeng | E bapisoang le 8011; ho tenyetseha ha mofani | Ductility e ntle haholo; bokhoni ba ho hula bo tebileng | Boholo ba mokoallo + Tloaelo e tebileng | E kopanya mokoallo le tiiso / peel & e ka hatisoang |
| Mefokolo ea bohlokoa | Ductility e tlase haholo; eseng bakeng sa ho bopa | Meeli e tšoanang le 8011 | Thibelo e tlase ea ho phunya ka tekanyo e tšoanang | Boima ho feta, theko e phahameng, phetoho e rarahaneng | Ho rarahana ka ho tsosolosa; mosebetsi o eketsehileng oa ho netefatsa |
8011-H18 Aluminium Foil bakeng sa Pharmaceutical Packaging ha ba hloka tšitiso ea tšepe le matla a phahameng a mochini ho li-gauge tse tšesaane..
Melemo ea eona - impermeable mokoallo, khanyetso e phahameng ea ho phunya, botsitso bo boholo le ho lekana bakeng sa ho fetolela ka lebelo le phahameng - etsa hore e be khetho ea kamehla bakeng sa li-push-through blister lidding le lits'ebetso tse ngata tsa lidding/laminate.
Ho e sebelisa ka katleho pharma, lihlopha tsa ho reka thepa li tlameha ho tsitlallela ho fana ka litokomane tsa GMP, lintlha tse ka ntšitsoeng le tsa sterilization, botenya bo thata le litlhaloso tsa bokaholimo, li-pairings tse tiisitsoeng tsa lacquer / filimi le netefatso e phethahetseng ea ts'ebetso (Matla a Horetsi, botshepehi, ts'ebeliso ea mokuli).
Kamehla u kenye litifikeiti tsa leloala le litlaleho tsa netefatso ho dossier ea taolo bakeng sa lihlahisoa tse felileng.
Q1 - Ke gauge efe ea 8011-H18 e tloaelehileng bakeng sa sekoaelo sa letlapa?
Li-gauge tse tloaelehileng tsa lera le le leng ke ~20–30 µm, e nang le 20–25 µm e tloaelehileng bakeng sa lipakete tse ngata tsa molomo tse tiileng. Li-gauge tse teteaneng (30-40 µm) li sebelisoa ha ho hlokahala khanyetso e phahameng ea ho phunya kapa bakeng sa lits'ebetso tse khethehileng.
Q2 - Na 8011-H18 e loketse mahlaseli a mofuta o batang?
Che - H18 e tletse ka thata 'me ha e tšoanelehe bakeng sa ho etsa serame se tebileng. Maqhubu a nang le serame a batang a hloka hore a be bonolo, li-alloys tse ngata tsa ductile kapa bohale bo fapaneng. Bakeng sa ho koaheloa holim'a li-blister tse batang, 8011-H18 e loketse joalo ka sekwahelo, empa sebaka sa marang-rang se tlamehang ho khethoa ka thoko.
Q3 - Ho etsa sterilization ho ama joang 8011-H18 laminate packs?
Lera la tšepe le tsitsitse tlas'a gamma le EtO sterilization, empa li-lacquers, li-inks le li-polymer sealants li tlameha ho netefatsoa. Autoclaving (mouoane) e ka sekisetsa lits'ebetso tse ling tsa lacquer / laminate - etsa netefatso e ikhethileng ea ts'ebetso.
Q4 - Ke litokomane life tseo ke lokelang ho li batla ho mofani oa thepa ea foil?
Ka bonyane: setifikeiti sa teko ea leloala (khemikhale + Tense), lacquer / coat data tekheniki le extractables tlaleho, bopaki ba GMP/ISO15378 kapa e lekanang, le traceability e ngata. Bakeng sa lihlahisoa tse laoloang, kenyeletsa lintlha tse tsamaellanang tsa ho thibela likokoana-hloko.
Q5 - Ke laola likoti joang le ho netefatsa botšepehi ba lithibelo?
Hlalosa meeli e amohelehang ea likoti, e hloka tlhahlobo e tlang ea pono le botšepehi (lisebelisoa tsa pin-hole), laela tlhahlobo ea pono ea ts'ebetso ea ho fetola mela le ho netefatsa liteko tse felileng tsa ho lutla / botšepehi (mohlala, ho senyeha ha vacuum, ho kenya dae moo ho hlokahalang).
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
