1. Okwu mmalite

8011-H18 Aluminom Foil maka nkwakọ ngwaahịa ọgwụ bụ ihe nkwakọ ngwaahịa bụ isi a nakweere nke ukwuu maka mkpuchi ọnya, sachet mkpuchi, na ihe owuwu foil laminated ejiri na ụlọ ọrụ ọgwụ.

Na H18 (zuru-ike) iwe iwe, Alloy a na-ebuga oke tensile na nkwụsị nkwụsị, ezigbo akụkụ kwụsie ike na elu-ọsọ nkwakọ ahịrị, na n'ezie ihe mgbochi ikuku oxygen, uzuoku mmiri, na ọkụ-ihe ndị bụ isi na-echekwa nkwụsi ike ọgwụ na ịgbatị ndụ nchekwa.

N'ozuzu, 8011-H18 aluminom foil na-anọchite anya ngwọta kwesịrị ekwesị na-ejikọta arụmọrụ mgbochi siri ike, n'ibu ntụkwasị obi, na nnabata usoro iwu, na-eme ka ọ bụrụ nhọrọ kachasị amasị maka ndị nrụpụta na-achọ ihe a pụrụ ịdabere na ya, scalable, na nkwakọ ngwaahịa ọgwụ na-akwado n'ofe ụdị usoro ọgwụgwọ siri ike na ọkara siri ike..

8011-H18 Aluminom Foil

2. Gịnị bụ 8011-H18 Aluminom Foil

8011-H18 bụ aluminom foil alloy usoro 8000 akpọrepu na azụmaahịa, ewepụtara ya na arụ ọrụ oyi zuru oke H18 (zuru-ike) iwe iwe, emebere maka ntụgharị ọgwụ ọsọ ọsọ (ọnya mkpuchi, ihe mkpuchi sachet na foil laminated) ebe a na-aga n'ihu metal mgbochi gbakwunyere elu mgbapu/anya mmiri na-eguzogide gauges dị nnọọ mkpa.

Alloy & iwe iwe

• "8011" na-akọwapụta usoro aluminom nke foil-ọkwa nke ahaziri maka ịtụgharị n'ime obere gauges nwere ezigbo elu elu yana nrụgide ọrụ.. E jiri ya tụnyere nri-ọkwa nri, 8011 emebere ya maka ịtụgharị arụmọrụ (ire ụtọ, obere pinhole omume, igwe na-agbanwe agbanwe).
• “H18” bụ akara iwe na-egosi na ejirila oyi rụọ foil zuru ike. Nke a pụtara n'ezie:
  • Ogologo elongation dị ala (obere pasent elongation tupu mgbaji).
  • Ike ike dị elu na nkwụsi ike jiri ya tụnyere iwe dị nro n'otu nlele ahụ.
  • Ọ dịghị mma maka ịbịaru miri emi - H18 foils bu n'obi ikwa aka (foils dị larịị), adịghị akpụ n'ime oghere.

Isi ihe na nlele

• Alloy ezinụlọ: 8000-usoro foil alloys (8011 bụ ihe nkịtị azụmahịa foil alloy).
• Iwe: H18 = siri ike (kacha bara uru ọrụ oyi; obere ductility, ike tensile/ntụpu dị elu).
• A na-eji ọgwụ izizi eme ihe: ịkwanye-site (PTP) ọnya mkpuchi, mkpuchi sachet otu dose, foil oyi akwa na laminated owuwu.
• Ihe nlele a na-ahụkarị maka mkpuchi mkpuchi: 20-40 µm (20-25 µm nkịtị maka mkpuchi ọnya mbadamba mbadamba; A na-eji nlele dị arọ karịa ebe achọrọ nchebe ọzọ).
• Gịnị mere e ji họrọ: metal impermeability (O₂/H₂O/ọkụ), nnukwu ntupu/nagide anya mmiri, nkwụsi ike webụ na ahịrị ọsọ dị elu, ezigbo ndakọrịta lacquer/okpomọkụ mgbe ejiri kpuchie ya nke ọma.

Huasheng Aluminom foil nha nha ịdị arọ

3. Njirimara nke 8011-H18 Aluminom Foil

Ihe mejupụtara kemịkal (tipikal, wt %)

Ederede bara uru: 8011 a na-emezi ka ọ bụrụ alloy foil na-adịghị ọcha; oke oke na-adabere na igwe igwe na ụdị ngwaahịa. Maka iji ọgwụ eme ihe, chọrọ mkpesa elementrị zuru oke na CoA.

Ngwongwo nke mebere (ahụkarị maka H18 foil - mkpa gauges)

Maka nlele foil dị obere, a na-eme ule tensile/mkpụrụ mkpụrụ n'ụdị mpempe akwụkwọ/ coupon.; nleba anya na akụkọ ntugharị na-emetụta omume n'ibu.

Mmetụta injinia: H18 foil siri ike ma na-eguzogide nguzobe pinhole n'oge ntụgharị na njuputa, mana enweghị ike ịdọrọ ya miri - ọ kachasị maka mkpuchi mkpuchi (foils dị larịị) kama etolite n'ime oghere.

Njirimara anụ ahụ

Rịba ama: ndidi ọkpụrụkpụ, Ọkpụkpụ n'elu na ịdị larịị dị oke mkpa maka igwe ọnya ọnya - kọwaa profaịlụ ọkpụrụkpụ nke ọ bụla ma hapụ ya ka ọ ghara ịdị larịị..

Njirimara mgbochi

Aluminom foil na-enye ihe dị mkpa ihe mgbochi ígwè na-aga n'ihu.

A na-ekpebi ịrụ ọrụ site na iguzosi ike n'ezi ihe (enweghị pinholes), lacquer / laminate usoro na ntụpọ.

• Oxygen nnyefe (Otr): nke kwere iheefu maka aluminom foil emebibeghị (ihe mgbochi ígwè na-apụghị imeri emeri). N'ihi na laminated owuwu OTR na-achịkwa ihe nkiri / laminate akara; oyi akwa aluminom na-enye aka na-adịghị mma.
• Nfefe ikuku mmiri (Wvr): aluminom foil dị irè enweghi ike na mmiri vepo. WVTR tụrụ atụ maka ngwugwu emechara dabere na iguzosi ike n'ezi ihe akara; maka foil emebibeghị, oyi akwa foil abụghị ihe na-egbochi ya.
• Ìhè Na Nso: opacity zuru oke na ọkụ UV/ahụ anya.
• Akaụntụ dị egwu: A na-achịkwa ọrụ mgbochi na omume site na pinholes, Seam na akara iguzosi ike n'ezi ihe na ndakọrịta lacquer / ihe nkiri - ọ bụghị site na nnukwu mkpọfe igwe..

Sachets maka ọgwụ

4. Uru nke 8011-H18 Aluminom Foil maka nkwakọ ngwaahịa ọgwụ

Arụmọrụ mgbochi

• Ihe mgbochi igwe zuru oke: na-egbochi oxygen, uzuoku mmiri na ọkụ - ndị bụ isi nyere aka na mmebi nke ọtụtụ API. Maka ọtụtụ mmemme nkwụsi ike nke mkpuchi mkpuchi aluminom na-ewepụ mkpa maka ndị ọzọ na-ekpochapụ ikuku oxygen ma ọ bụ ndị na-eri nri n'ime mkpọ mbụ..
• Amụma ịka nká: Ihe mgbochi metal anaghị abanye polymeric embrittlement ma ọ bụ ịkwaga plasticizer nke nwere ike ime ka ọ dị mgbagwoju anya naanị polymer..

Nrụ ọrụ igwe

• Nnukwu ntupu na nguzogide dọka mmiri na nha dị gịrịgịrị - Ọrụ oyi H18 na-emepụta ike nke na-echebe oghere ọnya na sachet elu site na mmebi na njuputa., njem na njikwa ndị ọrịa.
• Nkwụsi ike akụkụ na elu-ọsọ na-akpụ na lidding ahịrị ebelata web ezumike, misfeeds na-ajụ.

Naable & mmekọrịta mkpuchi

• 8011 emebere ya ka ọ nabata lacquers okpomọkụ-akara ọgwụ (Puvdc, acrylics, ọpụrụiche ọgwụ lacquers) nke na-enye a pụrụ ịdabere na ya, reproducible akàrà na-akpụ fim (PVC, PVdC/PVC, Ngwakọta PP).
• A ghaghị ịkwado mkpuchi mkpuchi na arụ ọrụ mkpuchi okpomọkụ maka kpọmkwem lacquer + akpụ ihe nkiri + window usoro (okpomọkụ / oge / nrụgide).

Ịdị ọcha

• A na-arụpụta foil nke emepụtara maka pharma n'okpuru ọnọdụ a na-achịkwa iji belata mmetọ ahụ na ihe fọdụrụ n'elu ionic.. Asambodo igwe na asambodo ịdị ọcha (eg, elu extractable ókè) bụ ọkọlọtọ ahịa chọrọ.

Ndakọrịta sterilization

• Gamma irradiation: Ngwa igwe anaghị emetụta ya; A ghaghị ịnwapụta lacquers/inks maka nkwụsi ike radieshon.
• Ethylene oxide (Kwụba n'ahịrị): ígwè foil na-anabata EtO, ma a ga-enyocha ihe ndị fọdụrụ na mkpochapụ site na mkpuchi ma ọ bụ laminates.
• Mmiri okpomọkụ (autoclave): ụfọdụ sistemụ lacquer / laminate nwere ike delaminate ma ọ bụ tụfuo ike akara - ejiri autoclave ga-akwadorịrị maka laminate na ngwaahịa akọwapụtara..

5. Ngwa nke 8011-H18 Aluminom Foil na Nkwakọ ngwaahịa ọgwụ

8011-H18 bụ foil na-arụ ọrụ maka nkwakọ ngwaahịa ọgwụ mbụ n'ihi na ọ na-ejikọta ihe mgbochi metal na-adịghị agwụ agwụ na nhụsianya dị elu na nhụsianya dị nro na omume weebụ kwụsiri ike na ahịrị ntụgharị ọsọ ọsọ..

8011-H18 Aluminom Foil maka nkwakọ ngwaahịa ọnya

Nkwakọ ngwaahịa ọnya

Push-through blisters chọrọ ihe mkpuchi nke ga-adịgide adịgide n'oge ndochi / njikwa mana nye onye ọrịa ohere ịkwanye mbadamba nkume na-enweghị ịdọka laminate na-atụghị anya ya..

8011-H18 na-abụkarị ihe mkpuchi mkpuchi nke nhọrọ n'ihi na ike ọrụ oyi dị elu nke H18 na-ebelata mmetụta pinhole ma na-eguzogide nsị site na iji ngwá ọrụ., mbadamba n'ọnụ na iga nchegbu.

Ihe owuwu a na-ahụkarị & nlele

• Otu mkpuchi mkpuchi (foil + lacquer): a na-ahụkarị maka ọtụtụ ọnya ORAL SOLID DOSE. Ụdị nlele: 20-25 µm maka ọkọlọtọ mbadamba; 25-35 µm maka mbadamba nkume buru ibu ma ọ bụ ebe achọrọ nkwụsi ike ọzọ.
• Ihe mkpuchi laminated (foil + polymer + lacquer): a na-eji ya mgbe akwa akwa akwa ọzọ, Enwere ike ibipụta ma ọ bụ omume peel/peelable emelitere ka achọrọ.

Mkpuchi na akara interface

Okpomọkụ-akara lacquer (Puvdc, acrylic, ma ọ bụ pụrụ iche pharma lacquers) A na-etinye ya na foil iji mee ka akara hermetic nwee ike ịmepụta weebụ (PVC, PVC/PVdC, Ihe nkiri mkpuchi PVdC).

Arọ uwe na-adịkarị site na 1-6 g/m² dabere na kemịkalụ lacquer na ike akara achọrọ.

Nkwakọ ngwaahịa aluminom foil

Mkpokọta ngwugwu

Nkwakọ ngwaahịa mwepu na-ezo aka na ibe ọnya ọnya na-aga n'ihu na mkpuchi nke enwere ike iji na sistemu inyefe otu dose ma ọ bụ ebe a na-achịkọta ọtụtụ doses na band na-aga n'ihu..

Nhọrọ injinia

• Nlele: yiri mkpuchi ọnya (20-35 µm), ahọpụtara ka ọ dabara ọsọ ahịrị yana mkpa nchedo ngwaahịa.
• Ọkpụkpọ igwe kwụ otu ebe & obosara gbawara agbawa: rịọ nkọwapụta coil/reel dabara na igwe gị (dayameta nke ime/mpụta, ọnụ ọgụgụ splices kwere, slit ndidi).

Formdị oyi (Alu-aghu)

"Alu-aghu” (foil ụdị oyi) na-ezokarị aka n'ihe owuwu aluminom nke nwere ọtụtụ oyi akwa ejiri ma dị ka ịmepụta webụ ma dị ka mkpuchi na aluminom zuru oke (foil / foil) ngwugwu ọnya.

A na-emepụta foils nke ọma na-eji alloys na iwe ọkụ ahọpụtara maka elu ductility inye ohere ịbanye n'ime oghere (eg, alloy dị nro ma ọ bụ iwe dị nro karịa H18).

Otu mkpọ Alu-Alu nwere ike ịnwe akwa aluminom abụọ jikọtara ya na akwa mkpuchi.

Ebe 8011-H18 nwere

• 8011-H18 bụ n'ozuzu ọ bụghị adabara dị ka akpụ (oyi-ụdị) foil n'ihi na H18 zuru oke ma nwee elongation dị ala. Agbanyeghị:
  • 8011-A na-ejikarị H18 eme ihe ikwa aka akụrụngwa na ngwakọ ngwugwu (oghere oyi na-etolite site na aluminom nwere ike ịdọrọ ebe 8011-H18 na-eje ozi dị ka oyi akwa mkpuchi na-adịghị agwụ agwụ.).
  • N'ụfọdụ ihe arụrụ arụ Alu-Alu, A na-eji alloy aluminom dị nro mee ihe maka oyi akwa na-akpụ ebe a na-etinye obere foil H18 n'elu iji nye ihe mgbochi mpụta siri ike mgbe achọrọ akwa mkpuchi siri ike..

Ụdị oyi-ụdị 8011-H18 Aluminom Foil

Sachets na obere akpa

Sachets nke otu maka ntụ ntụ, ọgwụ granular, semisolids na Topical nkwadebe. Enwere ike iji foil dị ka oyi akwa mkpuchi ozugbo ma ọ bụ dị ka oyi akwa mgbochi na laminates.

Ihe owuwu laminate nkịtị

• Foil (8011-H18) / lacquer / PET / sealant - a ahụkarị multi-layer laminate inye mgbochi, n'ibu ike na sealability. Nhọrọ ihe nkiri sealant (PE, PP copolymers, ma ọ bụ okpomọkụ-akara lacquer tie layers) a na-ahọrọ ka dakọtara parampat igwe akpa.

Akara Foil maka karama na arịa

Ihe mkpuchi foil na-emechi ọnụ karama (ịghasa okpu, karama dropper) na oghere akpa iji gosi ihe akaebe mebie ma chekwaa ịdị ọhụrụ.

Ndị a bụ ihe a na-ahụkarị maka nutraceuticals na ụfọdụ arịa mmiri mmiri/semisolid ọgwụ.

Nhọrọ injinia

• Nlele: na-adị arọ karịa mkpuchi ọnya - 25-50 µm dabere na nhazi liner na njikwa.
• Ọdịdị Liner: eg, foil (8011) + mkpuchi okpomọkụ-akara + onye na-ebu polymer (akwụkwọ/PET/PE). Na induction akara, Enwere ike itinye akwa susceptor na nhazi laminate.

6. Ntughari na nrụpụta

Usoro nrụpụta bụ ọkachamara pụrụ iche iji gboo mkpa ọgwụ:

1. Nkedo na ikpo ọkụ: Nke 8011 a na-atụba alloy n'ime ingots ma kpochie ọkụ n'ime nnukwu eriri igwe.

2. Ntugharị oyi: A na-emegharị ihe ahụ ugboro ugboro ka ọ wee nweta ihe nlele ikpeazụ (na-adịkarị 20𝜇m ka 40 𝜇m ).

3. Na-ewe iwe na iwe: A na-etinye foil ahụ ka ọ bụrụ iwe achọrọ (H18) site na ọrụ oyi na-achịkwa.

4. Ọgwụgwọ elu: The foil na-enweta mmebi na ihicha iji hụ na elu ọkwa ọgwụ.

5. Mkpuchi: A na-etinye lacquer okpomọkụ-akara nke ọma n'otu akụkụ, na ihe nchebe primer / ebipụta lacquer na-etinye aka n'akụkụ nke ọzọ maka ibipụta.

6. Nleba anya na ịdị mma: A na-ekewapụ foil emechara na nkọwa ndị ahịa wee tinye ya n'ọnọdụ siri ike na nleba anya ogo elu.

Mbupu mbupu maka nnukwu mpịakọta nke foil aluminom

7. Asambodo na ụkpụrụ

Ihe nkwakọ ngwaahịa ọgwụ ga-agbasorịrị iwu mba ụwa siri ike iji hụ na nchekwa ndị ọrịa na ịdị mma ọgwụ.

• FDA (U.s. Nri na ọgwụ ọgwụ): Achọrọ ihe ka ọ dị mma maka ịkpọtụrụ ọgwụ ozugbo.

• USP (United States Pharmacopeia) ⟨662⟩: Na-enye ụkpụrụ maka akụrụngwa nkwakọ ngwaahịa igwe, gụnyere ule ọrụ.

• EP (European Pharmacopoeia): Na-esetịpụ ụkpụrụ maka ihe eji eme ihe na arịa ọgwụ.

• ISO 15378: Na-akọwapụta ihe achọrọ maka ihe nkwakọ ngwaahịa mbụ maka ngwaahịa ọgwụ, gụnyere GMP (Omume nrụpụta ọma).

8. Tụnyere ihe ndị ọzọ aluminom

9. Mmechi

8011-H18 Aluminom Foil maka nkwakọ ngwaahịa ọgwụ mgbe ha chọrọ ihe mgbochi ígwè na ike ọrụ dị elu na nha dị mkpa..

Ya uru - impermeable mgbochi, nnukwu nkwụsịtụ, nkwụsi ike nke akụkụ na adabara maka ntụgharị ọsọ ọsọ - mee ka ọ bụrụ nhọrọ ndabara maka ntinye-site na ọnya mkpuchi na ọtụtụ ngwa mkpuchi / laminate..

Iji ya nke ọma na pharma, Otu ndị na-azụ ahịa ga-esi ọnwụ na ndị na-ebubata akwụkwọ GMP, extractables na sterilization data, uko ọkpụrụkpụ na elu nkọwa, nkwado lacquer / film pairings na nke ọma usoro nkwado (Ike, iguzosi ike n'ezi ihe, ndidi usability).

Na-etinye oge niile asambodo igwe igwe na akụkọ nkwado n'ime dossier iwu maka ngwaahịa emechara.

Ajụjụ gbasara 8011-H18 Aluminom foil maka nkwakọ ngwaahịa ọgwụ

Q1 - Kedu ihe nlele nke 8011-H18 bụ nke a na-ahụkarị maka mkpuchi ọnya mbadamba?
Ntugharị otu oyi akwa na-ahụkarị site na nlele mkpuchi bụ ~ 20-30 µm, na 20-25 µm na-ahụkarị maka ọtụtụ ngwugwu ọnụ siri ike. Ihe nleba anya (30-40 µm) A na-eji ya mgbe achọrọ nguzogide dị elu ma ọ bụ maka ngwa ọpụrụiche.

Q2 - Ọ bụ 8011-H18 dabara adaba maka ọnya oyi?
Mba - H18 siri ike na ọ dịghị mma maka ịkpụ oyi miri emi. Ọgba ọnya n'ụdị oyi chọrọ ka ọ dị nro, ọzọ ductile alloys ma ọ bụ dị iche iche iwe. Maka mkpuchi n'elu ọnya oyi, 8011-H18 dabara adaba dị ka mkpuchi, mana a ga-ahọpụtarịrị webụ na-akpụpụta iche.

Q3 - Kedu ka sterilization si emetụta ngwugwu laminate 8011-H18?
Igwe oyi akwa igwe kwụsiri ike n'okpuru gamma na EtO igba ogwu, ma lacquers, ink na polymer sealants ga-akwadorịrị. Ntugharị akpaaka (uzuoku) nwere ike imebi ụfọdụ sistemu lacquer/laminate - rụpụta nkwenye kpọmkwem usoro.

Q4 - Kedu akwụkwọ m ga-achọ n'aka onye na-ebubata foil?
Opekempe: akwụkwọ nyocha igwe igwe (kemịkalụ + tensile), data teknuzu lacquer/coat na akuko extractables, Ihe akaebe nke GMP/ISO15378 ma ọ bụ otu, na otutu traceability. Maka ngwaahịa edoziziri, gụnyere data ndakọrịta sterilization.

Q5 - Kedu otu m ga-esi ejikwa pinholes wee hụ na ọ bụ ihe mgbochi?
Ezipụta oke pinhole anabatara, chọrọ nleba anya anya na iguzosi ike n'ezi ihe na-abata (ihe nchọpụta pin-hole), nye iwu nleba anya n'ime usoro na ahịrị ịtụgharị wee kwado mkpọ mkpọ ntapu/nnwale ike zuru oke. (eg, agụụ ire ere, agba agba ebe ọdabara).