1. Okwu mmalite

5A06 aluminum mpempe akwụkwọ bụ a elu-arụmọrụ, aluminom-magnesium na-adịghị agwọ ọrịa (Al-Mg) alloy, ama ama maka ike ya pụrụiche, magburu onwe corrosion eguzogide, na ezigbo Waldọl.

Dịka onye otu usoro 5xxx, njirimara nkọwa ya bụ nke ya nnukwu magnesium ọdịnaya (na-emekarị 5.8-6.8%), nke na-etinye ya na elu echelon nke ike n'etiti ihe niile aluminom alloys siri ike.

Site n'ike nhịahụ na-akarịkarị 315 MPa, ọ karịrị nnọọ nkịtị mmiri alloys dị ka 5083, na-eme ka ọ bụrụ ihe pụrụ iche maka ngwa na-achọ ike kachasị na nhazi welded.

Ọ bụ ezie na ngwa ngwa ya bụ akụkọ ihe mere eme dị na ngalaba ikuku na ndị agha- maka ihe ndị dị ka tankị mmanụ welded, ngwa agha casings, na ngwa agha dị mfe—ọ na-ejekwa ozi na gburugburu ebe nrụgide ndị ọzọ dị elu.

Ngwakọta pụrụ iche nke ike weldable dị elu na ịdịte aka na-eme ka 5A06 bụrụ nhọrọ doro anya maka ihe owuwu dị oke egwu ebe arụmọrụ enweghị ike imebi yana ebe alloy na-ekpo ọkụ dị ka usoro 7xxx anaghị arụ ọrụ n'ihi weldability ha adịghị mma..

5A06 aluminum mpempe akwụkwọ

2. Ngwakọta kemịkalụ nke 5A06 Aluminom mpempe akwụkwọ

Arụmọrụ alloy 5A06 na-enweta site na nguzozi nke izizi emebere n'ime ọtụtụ iri afọ nke nyocha ọla ndị China.:

3. Iwe na Njirimara nke 5A06 Aluminom mpempe akwụkwọ

Ụdị iwe ọkụ (GB/T 16475-1996)

Nyocha akụrụngwa akụrụngwa

Ọganihu ike:

Ntọala O-ọkụ nke 315–375 MPa UTS agafeela 5083-H116 (305- 385 MPa) na nso 5383-H116 (370- 420 MPa), na-egosipụta 5A06 siri ike ngwọta siri ike.

Ịrụ ọrụ oyi ruo H18 na-enweta 400-460 MPa, na-agba ọsọ okpomọkụ-treatable 6061-T6 (290- 330 MPa) na-enweghị thermal nhazi.

Azụmahịa ductility:

Ogologo oge na-agbada site na 15-22% (O) ruo 3-6% (H18), na-eso ahụkarị mmekọrịta-ike ọrụ.

Agbanyeghị, 5A06 na-ejigide ductility dị elu n'ogo ike nhata ma e jiri ya tụnyere 5056 n'ihi usoro nrụrụ silicon.

Njirimara Anisotropy:

Planar anisotropy index Δr = 0.2-0.4 na-emepụta 8-12% na-enweta ihe na-ese ihe na iko cylindrical - nke a na-ejikwa site na njikarịcha nrụgide njide oghere na nhọrọ mmanu mmanu..

2mm 5A06 aluminum mpempe akwụkwọ ule ịdị arọ

Njirimara anụ ahụ na ọkụ

4. Imepụta na nhazi nke 5A06 Aluminom mpempe akwụkwọ

Arụmọrụ nke 5A06 aluminum mpempe akwụkwọ nwere njikọ chiri anya na otu esi emepụta ya na nhazi ya.

N'ihi na 5A06 bụ a nnukwu magnesium, Al-Mg alloy na-adịghị agwọ ọrịa, ike n'ibu ya, iguzogide corrosion, na ntụkwasị obi nrụpụta na-adabere na njikwa ziri ezi nke kemịkalụ alloy, nrụrụ, na thermal akụkọ ihe mere eme n'oge mmepụta.

Na-agbaze na njikwa alloy

Mmepụta na-amalite na elu-ọcha isi aluminum, agbakwunyere ebe kwesịrị ekwesị site na aluminom emegharịrị arụgharị nke ọma.

Alloying element — isi magnesium (5.8-6.8%), yana manganese na chromium-na-agbakwunyere n'okpuru ọnọdụ a na-achịkwa nke ọma.

Ngwakọta nke ọma dị mkpa, n'ihi na ọbụlagodi obere ngbanwe dị na ọdịnaya Mg nwere ike imetụta ike na omume corrosion nke ukwuu.

Nkedo na homogenization

Mgbe alloying, a na-atụba ígwè a wụrụ awụ mbadamba nkume na-eji kpọmkwem oyi oyi (DC) nkedo.

A na-eme slabs ndị a ọgwụgwọ okpomọkụ homogenization, a na nso nke 450-500 Celsius.

Homogenization na-eje ozi:

• Belata nkewa kemịkalụ na nkedo
• Gbanyụọ usoro agbaze dị ala
• Melite ịrụ ọrụ ọkụ na-ekpo ọkụ
• Kwalite ịdị n'otu microstructural

Na-ekpo ọkụ Rolling

A na-akpụgharị slabs ndị na-ekpo ọkụ na-ekpo ọkụ na okpomọkụ dị elu iji belata oke ma mezie nhazi ọka. N'oge a ogbo:

• A na-enweta mbelata oke ọkpụrụkpụ nke ọma
• Ọdịdị ọka na-aghọ elongated na nụchaa
• A na-emechi ntụpọ dị n'ime

Nlekọta okpomọkụ nke ọma na-egbochi mgbawa elu ma hụ na omume nrụrụ kwụsiri ike, nke dị mkpa karịsịa maka elu-Mg alloys dị ka 5A06.

Ntugharị oyi na njikwa ịdị arọ

Mgbe ịpịsịrị ọkụ, A na-edozi ihe ahụ site na oyi na-atụgharị iru ikpeazụ ọkpụrụkpụ ma melite elu mma.

Uru nke ntụgharị oyi gụnyere:

• Izi ezi akụkụ emelitere (ahụkarị ọkpụrụkpụ ndidi n'ime ± 0.5%)
• Emelitere elu elu kwesịrị ekwesị maka ịkpụ ma ọ bụ ịgbado ọkụ
• Na-arụsi ọrụ ike na-achịkwa iji nweta iwe ọkụ

Aluminom mpempe akwụkwọ mpịakọta usoro

Nkwụsi ike na nkwụsi ike nke iwe

Dabere na iwe achọrọ, mpempe akwụkwọ nwere ike ịmalite:

• Ntugharị zuru oke (O iwe) maka kacha ductility na formability
• Nkwụsi ike ma ọ bụ nkwụsịtụ akụkụ maka H112, H116, ma ọ bụ iwe ndị yiri ya

Ngwucha elu na nyocha

Nhazi ikpeazụ gụnyere:

• Mbelata na nhazi ọkwa iji kwalite ịdị larịị
• Nhicha elu ma ọ bụ ịcha ọkụ iji wepụ oxides
• Nlele anya na akpaaka maka ncha, ihe ndi mmadu, na laminations

5. Ngwa nke 5A06 Aluminom mpempe akwụkwọ

Daalụ ya ike dị elu, magburu onwe corrosion eguzogide, pụtara weldability, na ọdịdị dị arọ, 5A na-eji akwụkwọ aluminom A06 eme ihe n'ọtụtụ ebe na ụlọ ọrụ na-achọ ogologo ndụ ọrụ na ntụkwasị obi nhazi.

Uru arụmọrụ ya na-eme ka ọ dabara adaba maka ya ihe owuwu welded na-arụ ọrụ na gburugburu corrosive ma ọ bụ nnukwu ibu.

Injinia mmiri na Offshore

Otu n'ime mpaghara ngwa kachasị mkpa maka mpempe akwụkwọ aluminom 5A06 bụ injinia mmiri.

• Ihe owuwu ụgbọ mmiri na ọdụ ụgbọ mmiri
• Bulkheads na superstructures
• Akụkụ ikpo okwu dị n'ụsọ osimiri
• Ndị tankị mmiri na ogige

Ụgbọ mmiri ejiri mpempe akwụkwọ aluminom 5A06 mee ihe

Ụgbọ mmiri nrụgide na tankị nchekwa

Ndị injinia na-ahọrọkarị mpempe akwụkwọ aluminom 5A06 maka arịa nrụgide na sistemụ nchekwa mgbe nguzogide corrosion na mbelata ibu.

• Ụgbọ mmiri mmanụ na tankị nchekwa mmanụ
• Gas cylinders na ihe nrụgide
• Cryogenic na obere okpomọkụ arịa

Ụlọ ọrụ ụgbọ njem

Na ngalaba njem, 5A06 aluminum mpempe akwụkwọ na-akwado atụmatụ dị fechaa na arụmọrụ ike.

• Ụgbọ ala mmanụ ụgbọala na akụkụ ahụ
• Ụlọ ụgbọala na ụgbọala na-adọkpụ
• Ogwe ụgbọ okporo ígwè na okpokolo agba

Usoro nchekwa na ikuku metụtara

Ndị na-emepụta ihe na-eji mpempe akwụkwọ aluminom 5A06 na-agbachitere na ngwa ikuku dị n'akụkụ n'ihi na ọ na-enye oke ike na ịdị arọ na nguzogide siri ike na mmebi gburugburu ebe obibi..

• Ngwa agha na igba egbe sistemu
• Ogwe nhazi ihe nchekwa
• Ụgbọ elu ala-nkwado na ihe inyeaka

Ngwa kemịkalụ na ụlọ ọrụ mmepụta ihe

Nguzogide corrosion nke mpempe akwụkwọ aluminom 5A06 na-eme ka ọ baa uru nhazi kemịkalụ na gburugburu ụlọ ọrụ mmepụta ihe.

• Akpa kemịkalụ na pipeline
• Ụlọ ọrụ mmepụta ihe na ụlọ
• Akụrụngwa ekpughere na ikuku iru mmiri ma ọ bụ nke dị nro na-emebi emebi

5A06 aluminum mpempe akwụkwọ maka akpa kemịkalụ

6. Uru nke 5A06 Aluminom mpempe akwụkwọ

5A na-amata mpempe akwụkwọ A06 aluminom dị ka a Al-Mg alloy na-arụ ọrụ dị elu nke na-ejikọta ike n'ibu, iguzogide corrosion, na ntụkwasị obi nrụpụta.

Uru ndị a na-eme ka ọ bụrụ ihe kachasị amasị maka mmiri, njem njem, arịa nrụgide, na ngwa nhazi ebe ogologo oge ịdịte aka na arụmọrụ dị arọ dị mkpa.

Nguzogide corrosion dị elu

Otu n'ime uru dị ịrịba ama nke 5A06 aluminum mpempe akwụkwọ bụ ya magburu onwe corrosion eguzogide, karịsịa na gburugburu mmiri na iru mmiri.

• Nke nnukwu magnesium ọdịnaya (5.8-6.8%) na-akwalite guzobe a ok, ihe nkiri oxide kwụsiri ike n'elu, nke na-echebe nke ọma ihe onwunwe site na mmiri oké osimiri na ikuku corrosion.
• Ọdịnaya ọla kọpa dị ala na-ebelata corrosion galvanic na ọgụ intergranular.
• Tụnyere ya na carbon ígwè, 5A06 aluminum mpempe akwụkwọ nwere ike belata corrosion metụtara nrụzi site foduru 50% n'akụkụ osimiri ma ọ bụ n'ụsọ osimiri.

Oke Ike-na-ibu Ratio

5A06 aluminum mpempe akwụkwọ na-enye a ike itule n'etiti n'ibu ike na ala njupụta, na-ebuga ọmarịcha nhazi arụmọrụ.

• Njupụta: ihe dị ka 2.66 g/cm³, ihe dị ka otu ụzọ n'ụzọ atọ nke ígwè.
• Ike tensile na-ahụkarị: ≥315 MPa, tụnyere ụfọdụ ígwè alloy dị ala n'usoro ike-kwa-arọ.

Ọkachamara Weldability na arụ ọrụ

N'adịghị ka okpomọkụ-agwọta aluminum alloys, 5A06 aluminum mpempe akwụkwọ na-ekwusi ike ike n'ibu Njirimara mgbe ịgbado ọkụ, na-eme ka ọ dị mma maka ihe owuwu ndị dị mgbagwoju anya.

• Kwesịrị ekwesị maka ME, TIG, na iguzogide ịgbado ọkụ
• Obere ohere maka mgbawa ọkụ
• Opekempe nbibi ike weld

Nzaghachi Anodizing dị elu

5A06 aluminum mpempe akwụkwọ na-egosipụta a nzaghachi anodizing dị elu, na-agbakwụnye ma uru arụmọrụ na aesthetic.

• Mepụta uwe, nnukwu anodic oxide n'ígwé
• Ike elu elu ma na-eyi nguzogide mgbe anodizing gasịrị
• Nchekwa corrosion emelitere na mkpuchi ọkụ eletrik

Aluminom mpempe akwụkwọ 5A06 anodized

7. Ntụnyere na Alloys Alternative

8. Kedu ihe kpatara ịhọrọ Huasheng Aluminom?

Huasheng Aluminom bụ ọkachamara aluminom ihe na-ebubata ihe na-enyefe Mpempe akwụkwọ aluminom 5A06 dị elu maka ngwa na-achọsi ike.

Isi ike nke Huasheng Aluminom

• siri ike njikwa ihe mejupụtara kemịkalụ na traceability zuru oke
• Nke zuru oke n'ibu na corrosion ule
• Ọkpụkpọ siri ike nke otutu iwe na akụkụ omenala
• nnabata na ụkpụrụ mba ụwa na ihe a chọrọ n'ọrụ akọwapụtara
• Nkwado nka na ụzụ maka nhọrọ ihe na nduzi nrụpụta

Site na ijikọta nka n'ichepụta ihe na mmesi obi ike, Huasheng Aluminom na-enyere ndị ahịa aka ibelata ihe egwu ma melite arụmọrụ ọrụ.

9. Mmechi

5A06 aluminum mpempe akwụkwọ abụghị ihe n'ozuzu-ebumnobi ihe; ọ bụ a ọkachamara engineering ngwọta emebere maka oke.

Ọ na-anọchite anya oke ike n'ime ezinụlọ nke ndị na-adịghị agwọ ọrịa, aluminum alloys weldable.

Uru ya adabereghị na ngbanwe ya, ma n'ikike ya inye ihe ngwọta dị mkpa maka ngwa dị warara ma dị oke egwu na mbara igwe, agha, na nnukwu arụmọrụ mpaghara mmiri.

Maka ndị injinia na-alụso ihe ịma aka aka ebe a ga-enwerịrị ike kachasị ike na-achụghị weldability, 5A06 na-eguzo dị ka nhọrọ ihe egosipụtara ma dị ike.

Ajụjụ

Q1: A na-agwọ ya 5A06 aluminum mpempe akwụkwọ okpomọkụ?
Mba. 5A06 bụ alloy anaghị agwọ ọrịa; ike ya sitere na ọdịnaya magnesium ma na-arụ ọrụ ike.

Q2: Bụ 5A06 dabara maka gburugburu mmiri?
Ee. Ọdịnaya magnesium ya dị elu na-enye ezigbo nguzogide mmiri mmiri na ikuku mmiri.

Q3: Kedu ka 5A06 si atụnyere 5083 aluminom?
Ha abụọ na-enye ezigbo nguzogide corrosion; 5A06 na-enyekarị ike dị elu karịa, mgbe 5083 bụ nke zuru ụwa ọnụ ahaziri maka iwu ụgbọ mmiri.

Q4: Nwere ike 5A06 aluminum mpempe akwụkwọ welded mfe?
Ee. Ọ nwere magburu onwe weldability na ntakiri ọnwụ nke n'ibu Njirimara mgbe ịgbado ọkụ.

Q5: Kedu oke oke dị?
5A06 aluminom mpempe akwụkwọ na-adịkarị site na mpempe nlele dị mkpa ruo na nnukwu efere, dabere na ngwa na ike ndị na-eweta ya.