| Property | Value |
| Tensile Strength | 200 to 330 MPa |
| Yield Strength | 80 to 280 MPa |
| Modulus of Elasticity | 68 GPa |
| Elongation at Break | 2.0 to 19 % |
| Hardness (HB) | 52 to 88 |
| Shear Strength | 26 GPa |
Welcome to Huasheng Aluminum, your premier source for high-quality 5754 aluminum sheet plates. As a leading factory and wholesaler, we take pride in delivering top-notch aluminum products tailored to meet the diverse needs of our clients across various industries. Our 5754 aluminum sheets are renowned for their excellent properties, making them suitable for a wide range of applications.
5754 aluminum is an aluminum-magnesium alloy with excellent corrosion resistance, good weldability, and moderate strength. It is commonly used in marine, automotive, and industrial applications where durability and lightweight are critical. Here, we delve into the details of our 5754 aluminum sheet plates, covering their properties, temper variations, applications, and chemical composition.
| Property | Value |
| Tensile Strength | 200 to 330 MPa |
| Yield Strength | 80 to 280 MPa |
| Modulus of Elasticity | 68 GPa |
| Elongation at Break | 2.0 to 19 % |
| Hardness (HB) | 52 to 88 |
| Shear Strength | 26 GPa |
This is a strain-hardened alloy that has been partially annealed to improve its formability.
Sheet 0.2mm to 6.00mm
| Property | Value |
|---|---|
| Tensile Strength | 160 – 200 MPa |
| Yield Strength | 60 Min MPa |
| Elongation A50 mm | 12 Min % |
| Hardness (HB) | 44 |
| Shear Strength | 105 MPa |
Data comes from 5754 – H111 Treadplate Chemical Composition
Applications:
Specific Examples:
This is a strain-hardened alloy that has been partially annealed to reduce internal stresses and increase strength.
| Property | Value |
| Tensile Strength | 245 MPa |
| Yield Strength | 185 MPa |
| Modulus of Elasticity | 70.3 GPa |
| Elongation at Break | 15% |
| Hardness (HB) | 75 |
| Shear Strength | 150 MPa |
Applications:
Specific Examples:
This is the annealed state of the alloy, characterized by low strength and high formability.
| Property | Value |
| Tensile Strength | 210 MPa |
| Yield Strength | 90 MPa |
| Modulus of Elasticity | 68 GPa |
| Elongation at Break | 19% |
| Hardness (HB) | 52 |
| Shear Strength | 130 MPa |
Applications:
Specific Examples:
| Element | Chemical Symbol | Percentage (%) |
|---|---|---|
| Aluminum | Al | 93.6 – 97.3 % |
| Magnesium | Mg | 2.6 – 3.6 % |
| Manganese | Mn | <= 0.50 % |
| Chromium | Cr | <= 0.30 % |
| Iron | Fe | <= 0.40 % |
| Silicon | Si | <= 0.40 % |
| Zinc | Zn | <= 0.20 % |
| Copper | Cu | <= 0.10 % |
| Titanium | Ti | <= 0.15 % |
| Other, each | <= 0.05 % | |
| Other, total | <= 0.15 % | |
At Huasheng Aluminum, we offer a wide range of customization options to meet specific requirements, including:
1. Introduction As industrie……
Introduction In the world of……
8011 H18 blister aluminum fo……
Introduction to 1050 Epoxy C……
1. Introduction 8011 Embosse……
1. Introduction to 3003 Alum……
Henan Huasheng Aluminum Co., Ltd (HHALU for short), established in 2001, is located in Huiguo Town, the famous Aluminum capital of Henan Province, It's a professional manufacturer and engages in the research, development, production, sales and service of aluminum sheet plate, aluminum coil, aluminum foil, aluminum strip and aluminum circle.
In addition, HHALU also sell aluminum plate for construction and ships, aluminum mirror plate, and automotive aluminum alloy plate.
No.53, Dongming Road, Zhengzhou, Henan, China
Copyright © Huasheng Aluminum 2025. All rights reserved.
