| Temper | O (Annealed), H14, H24 |
| Thickness | 0.2-6.35 mm |
| Width | 100-1524mm |
| Length | Customizable |
| Surface Finishes | Mill finish, Brushed, Anodized |
| Standards | ASTM B209, EN573, EN485 |
At Huasheng Aluminum, we pride ourselves on offering a wide range of aluminum products, including the highly versatile 3105 Aluminium Sheet Plate. Our commitment to quality, precision, and customer satisfaction sets us apart as a leading factory and wholesaler in the aluminum industry.
Key Features:
Temper Options:
Dimensions:
Surface Finishes:
Density: 2.72 g/cm³
Standards: ASTM B209, EN573, EN485
3105 alloys of different temperatures have different Mechanical Properties, the following table shows the specific mechanical properties of different temper:
3105-H12
| Property | Value | Unit | Notes |
| Hardness, Brinell | 41 | 500 kg load with 10 mm ball. Calculated value. | |
| Tensile Strength, Ultimate | 152 | MPa | |
| Tensile Strength, Yield | 131 | MPa | |
| Elongation at Break | 7.0 % | @Thickness 1.59 mm (0.0625 in) | |
| Modulus of Elasticity | 68.9 | GPa | Average of tension and compression. |
| Poissons Ratio | 0.33 | ||
| Shear Modulus | 25.0 | GPa | |
| Shear Strength | 96.5 | MPa | AA; Typical |
here is the chemical composition table for the 3105 aluminum alloy:
| Component Element | Percentage (%) |
| Aluminum (Al) | ≤ 95.9 |
| Chromium (Cr) | ≤ 0.20 |
| Copper (Cu) | ≤ 0.30 |
| Iron (Fe) | ≤ 0.70 |
| Magnesium (Mg) | 0.20 – 0.80 |
| Manganese (Mn) | 0.30 – 0.80 |
| Other, each | ≤ 0.05 |
| Other, total | ≤ 0.15 |
| Silicon (Si) | ≤ 0.60 |
| Titanium (Ti) | ≤ 0.10 |
| Zinc (Zn) | ≤ 0.40 |
Please note that the percentage of aluminum is given as less than or equal to 95.9%, which means it is the remainder of the composition after accounting for the other elements. The “Other” category includes any additional elements that may be present in the alloy but are not specifically listed.
3003 vs. 3105:
5052 vs. 3105:
Introduction 1060 Aluminium ……
Introduction: At Huasheng Al……
Introduction Aluminium alloy……
Introduction 1070 Aluminium ……
Introduction to 3004 Alumini……
Introduction Welcome to Huas……
Henan Huasheng Aluminum Co., Ltd (HHALU for short), established in 2001, is located in Huiguo Town, the famous Aluminum capital of Henan Province, It's a professional manufacturer and engages in the research, development, production, sales and service of aluminum sheet plate, aluminum coil, aluminum foil, aluminum strip and aluminum circle.
In addition, HHALU also sell aluminum plate for construction and ships, aluminum mirror plate, and automotive aluminum alloy plate.
No.53, Dongming Road, Zhengzhou, Henan, China
Copyright © Huasheng Aluminum 2023. All rights reserved.
