1. Selelekela

Letlapa la aluminium le kentsoeng ka Stucco le emela thepa e sebetsang haholo le e sebetsang ka mokhoa o fapaneng, e bohlokoa indastering e mengata ea sejoale-joale..

Ka ho fana ka khetho e ikhethang, e sa tloaelehang “Stucco” mohlala holim'a maqephe a aluminium a bataletseng, thepa ena e fumana lintlafatso tse bohlokoa ho feta thepa ea eona ea mantlha.

Ts'ebetso ea embossing e eketsa karohano ea ho tiea ho ea ho boima ba leqephe, fokotsa “ho tšela oli” liphello, e hasanya kganya bakeng sa kganya e fokotsehileng, 'me e pata mefokolo e menyenyane ea bokaholimo.

Ho sebelisa lisebelisoa tse tloaelehileng tsa aluminium tse kang 1100, 3003, le 5005, le maikutlo a fapaneng, lishiti tse khabisitsoeng ka stucco li fana ka motsoako o nepahetseng oa matla a bobebe, khanyetso ea corrosion ka tlhaho, le ntlafatso ea nako e telele.

Ho etsoa ha eona ho kenyelletsa ho roala ka nepo le ho khabisa, e lateloa ke taolo e matla ea boleng ho netefatsa ho ts'oana ha mohlala le botšepehi ba lintho tse bonahalang.

Ka lebaka leo, aluminium e entsoeng ka stucco e fumana ts'ebeliso e pharaletseng kahong (khitla, ho rulela, ho kenya seaparo sa kahare), sehatsetsi, sepalangoang, le lisebelisoa tse fapaneng tsa indasteri le mekhabiso, ho feta lisebelisoa tse ling tse ngata maemong a ikhethileng ka lebaka la motsoako o ikhethang oa melemo ea botle le ts'ebetso.

Leqephe la Aluminium le khabisitsoeng ka Stucco

2. Litšobotsi tsa Motheo tsa Letlapa la Aluminium (Lintho tse iqapetsoeng)

2.1 Lintho tse Alloys

Khetho ea motsoako ke "enjene"; embossing ke "tuning." Li-alloys tse tloaelehileng tse sebelisetsoang ho khabisa stucco li kenyelletsa:

Molao o tšepahalang oa letsoho: haeba o hloka "sekoaelo sa "stucco" sa sepheo se akaretsang,” 3003/3105 ke likhetho tse tloaelehileng; bakeng sa sebopeho se phahameng haholo / ts'ebetso ea mocheso, 1xxx e tloaelehile; bakeng sa matla a phahameng le libaka tse thata, 5052 hangata e kena moqoqong.

2.2 Khalefo

Bohale bo laola matla khahlanong le sebopeho ho feta mokhoa oa emboss.

• O (annealed): boholo ductility le bendability; matla a tlhahiso e tlase; e bonolo bakeng sa ho taka ka botebo le sebopeho se thata.
• H1x / H2x / H3x (malapa a thatafetseng): matla a phahameng butle-butle ka bolelele bo fokotsehileng.
  • H14 / H24 li sebelisoa haholo compromise tempers bakeng sa lakane e tlamehang ho sebetsana le ho theha ha e ntse e hanela meno.
  • H18 (kapa tse tshoanang le tsona) e fana ka matla a holimo empa e ka fokotsa ho theha radius le botebo ba emboss pele likotsi tsa maqhetsoana li eketseha (haholoholo kamora ho roala).

Haeba likarolo li hloka ho etsoa ha bohlokoa ka mor'a ho embossing, meralo hangata khetha bohale bo boleta kapa mekhoa e sa tebang ho thibela litlhōrō tsa khatello ea sebaka ka seng "liphula" tse khabisitsoeng.

Huasheng High Quality Stucco E Embossed Aluminium Sheet

2.3 Litlhaloso Tse Tloaelehileng

Lipampiri tsa aluminium tse sebelisetsoang ho khabisa li-stucco hangata li latela litekanyetso tsa machaba tsa sebopeho le thepa ea mochini..

• ASTM B209: Tlhaloso e Tloaelehileng bakeng sa Aluminium le Aluminium-Alloy Sheet le Plate. Sena se laola sebopeho sa lik'hemik'hale, thepa ea mochini, le mamello ea boholo ba maqephe a aluminium a bataletseng.
• IN 485: Lisebelisoa tsa aluminium le aluminium - Letlapa, hlobolisa le poleiti. Tekanyetso ena ea Europe e totobatsa litlhoko tse tšoanang.
• Botenya: Botenya ba lishiti tsa aluminium tse kentsoeng ka stucco li ka fapana haholo ho latela ts'ebeliso, hangata ho tloha ho 0.3 mm ho 3.0 mm (0.012 ho 0.118 litsoe). Botenya bo tloaelehileng bo kenyelletsa 0.5 mm, 0.8 mm, 1.0 mm, le 1.2 mm.
• Bophara: Bophara bo tloaelehileng bo tloha ho 1000 mm ho 1500 mm (39.4 ho 59 litsoe), le hoja bophara ba tloaelo bo fumaneha.

3. Ts'ebetso ea Tlhahiso ea Letlapa la Aluminium le khabisitsoeng ka Stucco

Ho hlahisa pampiri ea aluminium e entsoeng ka stucco ke mokhoa o nepahetseng oa indasteri o kenyelletsang mekhahlelo e mengata ea bohlokoa, e 'ngoe le e' ngoe e kenya letsoho boleng le litšobotsi tsa sehlahisoa sa ho qetela.

3.1 Ho lokisoa ha Letlapa la Aluminium

• Ingot casting & Hot Rolling: Ts'ebetso e qala ka ho lahlela li-ingots tsa aluminium ho tsoa ho li-alloys tse khethiloeng (mohlala, 1050, 3003, 5005). Joale li-ingots tsena li chesoa ka har'a li-slabs tse teteaneng.
• Cold Rolling: Li-slabs li feta letoto la lipalangoang tse batang tse batang, butle-butle ho fokotsa botenya ba tsona ho isa tekanyong e batloang (mohlala, 0.5 mm, 1.0 mm, 1.5 mm). Mokhahlelo ona ke oa bohlokoa bakeng sa ho fumana mamello e nepahetseng ea botenya le thepa e ts'oanang ea mochini.
• Anealing (haeba ho hlokahala): Ho ipapisitsoe le khalefo ea ho qetela eo u e batlang, letlapa le kolobisitsoeng ka serame le ka 'na la kena tšebetsong ea ho phunya. Ho hlapa ka botlalo (ho “O” bohale) eketsa ductility, ha a ntse a annealing e sa fellang (ho “Hx2” kapa “Hx4” bohale) e fana ka tekanyo e mahareng ya matla le ho sebetsa, e loketse ho kgabisa.
• Ho hloekisa & Tlhahlobo: Pele ho embossing, khoele ea aluminium e bataletseng e hloekisoa hantle ho tlosa oli efe kapa efe e setseng, ditshila, kapa ditshila tse ka hodimo. E ntan'o hlahlojoa ka matla bakeng sa mefokolo e ka holimo (mohlala, mekgoapo, likoti, mefuta e fapaneng ea likhakanyo) seo se ka ama boleng ba embossing.

Ts'ebetso ea Tlhahiso ea Letlapa la Aluminium le khabisitsoeng ka Stucco

3.2 Mokhoa oa ho Embossing

Ona ke mohato oa mantlha oa phetoho o etsang paterone e ikhethang ea stucco.

• Roll Embossing (Mokhoa o ka sehloohong):
  • Thepa: Letlapa le lokisitsoeng la aluminium (ka sebopeho sa coil) e feptjoa ka ho tsoelang pele ka leloala la embossing. Leloala lena hangata le na le lirolara tsa tšepe tse boima, e le nngwe e betlilweng le e motona (phahamisitsoe) mohlala oa moralo oa stucco, mme e mong le e tshehadi e tsamaisanang le yona (recessed) mohlala, kapa ka linako tse ling moqolo o le mong o betliloeng o sebetsang khahlanong le boreleli, bekapo moqolo o thata.
  • Tshebetso: Ha lakane e bataletseng ea aluminium e feta pakeng tsa meqolo ena e betliloeng tlas'a bohlokoa, khatello e laoloang hantle, mohlala o fetisetsoa ka mochine holim'a likarolo tse peli tsa aluminium. Khatello e holofatsa tšepe, ho theha e sa tloaelehang, sebopeho sa sekoahelo se kang majoana.
  • Mekhahlelo ea Bohlokoa:
    • Moralo oa Roll & Boleng: Ho nepahala le boleng ba meqolo e betliloeng ke tsa bohlokoa bakeng sa phetisetso e ts'oanang ea mokhoa o ts'oanang le ho tsitsa ha botle..
    • Khatello ea Embossing: Khatello e laoloang ka nepo e netefatsa botebo bo nepahetseng ba paterone ntle le ho hatella haholo thepa kapa ho etsa mosesaane o sa batleheng..
    • Lebelo la Mola: E ntlafalitse ho etsa bonnete ba ho khabisa ka mokhoa o ts'oanang le ho sebetsa hantle.
    • Bohale ba Lintho: Bohale ba letlapa le tlang le sephara le susumetsa tsela eo le senyehang ka eona le boemo ba ho qetela bo thata ba mosebetsi. Boikutlo bo sola maikutlo (O) e tla hatisa habonolo empa e kanna ea se boloke botsitso ba morao-rao joalo ka khalefo e thata (H14).

3.3 Phekolo ea Bokaholimo

Ka mor'a ho embossing, Litlhare tse ling tse ka holimo li ka ntlafatsa ts'ebetso ea lakane kapa botle ba eona.

• Anodizing: Ts'ebetso ea electrochemical e tenya lera la oxide le hlahang ka tlhaho holim'a aluminium. Anodizing e ntlafatsa ho hanyetsa kutu, thatafalo, mme e ka fana ka mebala e fapaneng ea mekhabiso ha e ntse e boloka sebopeho sa stucco.
• Ho penta / Powder Coating: Bakeng sa litlhoko tse khethehileng tsa mebala kapa tšireletso e eketsehileng, maqephe a khabisitsoeng a ka penta kapa a koahetsoe ka phofo. Sebopeho sa stucco se lula se bonahala ka tlas'a seaparo, e fanang ka phello e ikhethang ea pono.
• Lijase tse Hlakileng: Tšebeliso ea li-lacquers tse hlakileng kapa li-varnish li ka sireletsa qetello ea aluminium ea tlhaho ho tloha ho oxidation le ho senya ho fokolang..
• Ho hloekisa / ho hloloa: Post-embossing, tlhoekiso ea ho qetela e ka etsoa ho etsa bonnete ba hore maqephe ha a na mafura kapa lerole la ts'ebetso, haholo-holo haeba li reretsoe ho qetela.

3.4 Taolo ea Boleng

Mehato e matla ea taolo ea boleng e kengoa tšebetsong mohatong o mong le o mong ho netefatsa hore sehlahisoa sa ho qetela se kopana le litlhaloso tse thata.

• Tlhahlobo ea Mohala: Nakong ea ts'ebetso ea embossing, li-sensor tsa optical le bahlahlobi ba batho ba lekola ho tšoana ha paterone, botebo, le ho se be le mefokolo (mohlala, ho fafatsa habeli, matheba a bataletseng, dikeledi).
• Dimensional Checks: Post-embossing, botenya, bophara, 'me litekanyo tsa bolelele li netefatsoa ka hloko khahlano le mamello.
• Tlhahlobo ea Pono: Lipampiri tse phethiloeng kapa li-coil li hlahlojoa bakeng sa mefokolo e ka holimo, Mmala oa ho nahanisisa (haeba e pentiloe esale pele), le boleng ba botle ka kakaretso.
• Teko ea Mechini: Mehlala e nkuoa khafetsa bakeng sa liteko tse senyang (mohlala, Tense, Khefutsa, thatafalo) ho etsa bonnete ba hore thepa ea mochine e lumellana le litlhaloso ka mor'a ho embossing.

3.5 Sephutheloana

Ho paka ka nepo ho bohlokoa ho sireletsa lipampiri tsa aluminium tse kentsoeng ka stucco nakong ea polokelo le lipalangoang.

• Sephutheloana sa Coil: Li-coils hangata li phuthetsoe ka lifilimi tse sireletsang (mohlala, otlolla filimi, Pampiri ea VCI bakeng sa tšireletso ea kutu) ebile e tiisitsoe holim'a liphalete tsa lehong kapa skids.
• Sephutheloana sa Maqephe: Lipampiri ka bomong li atisa ho aroloa ka pampiri e kopantsoeng kapa filimi ea polasetiki ho thibela ho senya, e phuthetsoeng ka mapolanka a lehong, le ho tlamelloa ka mokhoa o sireletsehileng. Litšireletso tsa moeli li sebelisoa hangata.

Melemo ea Stucco E Embossed Aluminium Sheet

4. Melemo ea Stucco E Embossed Aluminium Sheet

4.1 E bobebe ebile e Matla

Boima bo tlase ba aluminium bo fana ka liphanele tse bobebe; embossing e ka ntlafala boima bo bonahalang le ho fokotsa tšenyo e bonahalang ea ho tšoara ntle le ho eketsa boima.

4.2 Khanyetso ea Corrosion

Aluminium ka tlhaho e etsa oxide e sireletsang. Bakeng sa libaka tse mabifi, anodizing kapa PVDF coat e ntlafatsa haholo ts'ebetso ea nako e telele.

4.3 Boipiletso ba Aesthetic

Sebopeho sa Stucco:

• e fokotsa glare,
• e etsa hore mefokolo e nyane e se bonahale,
• e fana ka tekeno e tsitsitseng ea pono ea "tegeniki" e sebelisoang lisebelisoa le likoahelo tsa mohaho.

4.4 Ntlafatso ea ho tšoarella

Eseng “e sa senyeheng,” empa e mamella ho feta:

• scuffs,
• mekgoapo e bobebe,
• metsu e nyane,
• matshwao a ho tshwara nakong ya ho kenya.

4.5 Thermal le Motlakase Conductivity

Esita le ka li-embossing le liaparo tse ngata, aluminium e lula e le conductor e matla ea mocheso ha e bapisoa le litšepe le li-polymers-e molemo ho liphanele tsa HVAC, Sisteme ea Insulation, le matlo a thepa.

5. Lisebelisoa tsa Stucco Embossed Aluminium Sheet

Ho feto-fetoha ha maemo le thepa e ntlafalitsoeng ea letlapa la aluminium e entsoeng ka stucco e etsa hore e be khetho e ratoang har'a liindasteri tse ngata..

Kaho e Sebelisitsoeng Stucco Aluminium Sheet

5.1 Indasteri ea Kaho

• Mehaho ea Mehaho ea Meaho le Lifahase: E sebelisoa haholo bakeng sa ho roala lebota ka ntle, likoahelo tsa kholomo, le fascia. Sebopeho se bobebe se fokotsa moroalo oa sebopeho, athe khanyetso ea kutu e tiisa hore motho o phela nako e telele 'me pheletso e phatlalalitsoeng e fokotsa khanya, ho theha bokantle ba moaho bo kgahlehang le bo hlokang tlhokomelo.
• Lisebelisoa tsa ho Rulela: E fana ka boima bo bobebe, e tšoarellang, le khetho e bonahatsang haholo bakeng sa ho rulela, ho kenya letsoho katlehong ya matla ka ho fokotsa ho monya mocheso.
• Lerako le ka Hare-hare le Liphanele tsa Siling: E fana ka e khahlehang, e tšoarellang, le ho le bonolo ho boloka bokaholimo bakeng sa ka hare khoebo le indasteri.
• Insulation Jacketing le Cladding: Ntho ea bohlokoa bakeng sa ho sireletsa mocheso oa mocheso holim'a liphaephe, litanka, le lisebelisoa tsa ho sebetsa lifemeng tsa indasteri le tsa petrochemical. Mohlala oa stucco o fana ka boima bo eketsehileng, ho sireletsa sekoahelo ho tloha tšenyo ea mochine, hape e sebetsa joalo ka sesebelisoa sa leseli bakeng sa polokeho.

5.2 Refrigeration le Insulation

• Li-Linings tsa Sehatsetsi / Sehatsetsi: Marako a ka hare a lihatsetsi tsa khoebo le tsa indasteri hangata a sebelisa aluminium e entsoeng ka stucco.. Khanyetso ea eona ea kutu, boiketlo ba ho hloekisa, le bokgoni ba ho hanela “ho tšela oli” ka liphanele tse kholo li etsa hore e be tse loketseng bakeng sa ho boloka maemo a bohloeki le botšepehi ba sebopeho serameng, hangata mongobo, tikoloho.
• Liphanele tsa kamore e batang: E sebelisoa ha ho hahoa likamore tse batang tsa modular le lihatsetsi, ho rua molemo tlhahong ya yona e bobebe le bokahodimo bo matla.
• Lijana tsa Lipalangoang tse Insulated: Ho koaheloa ka hare bakeng sa lijana tse sebelisoang ho tsamaisa thepa e baballang mocheso.

5.3 Likoloi le Lipalangoang

• Letlalo la Trailer le RV Siding: Thepa e ka sehloohong bakeng sa ka ntle siding holim'a litereilara tsa thepa, likoloi tsa boithabiso (Li-RV), le litopo tsa literaka. Thepa ea eona e bobebe e thusa ho sebetsa hantle ha mafura, athe ho tšoarella ha eona le bokhabane ba eona bo mamella maemo a litsela le boemo ba leholimo.
• Likahare tsa Libese le Seporo sa Terene: E sebelisoa bakeng sa liphanele tsa ka hare tsa marako, Lipale tsa Caliling, le partitions, e fanang ka motsoako wa nako e telele, boima bo tlase, le e kgahlehang, ho hloekisoa ha bonolo.
• Likopo tsa Marine: Libakeng tse ling tseo e seng tsa sebopeho sa maoatleng moo ho hanyetsanang le kutu ho leng bohlokoa.

5.4 Lisebelisoa tsa indasteri

• Likarolo tsa HVAC tsa Ts'ebetso ea Likotopo le tsa Moea: E sebelisetsoa ho etsa liphaephe tsa moea, plenum, le liphanele tsa ka hare / tsa ka ntle tsa lihlopha tsa ho sebetsana le moea. Ho thatafala ho eketsehileng ho thusa ho thibela “phefumoloho” (tenyetseha) le vibration ka har'a ductwork, e lebisang lits'ebetsong tse khutsitseng le tse sebetsang hantle tsa HVAC.
• Lisebelisoa tsa Casings: Libaka tse bobebe le tse tšoarellang bakeng sa mechini e fapaneng ea indasteri le lisebelisoa tsa motlakase.
• Litšehetso tsa Lipontšo: E fana ka setala, e tšoarellang, le tšehetso e hanyetsanang le boemo ba leholimo bakeng sa matšoao a kantle.
• Litanka tsa polokelo le Silo Cladding: E sebelisoa e le mokhabiso oa kantle bakeng sa litanka tse kholo tsa polokelo le li-silo, ho tshireletsa le ho fana ka kgahleho, pheletso e hlokang tlhokomelo e tlase.

Leqephe la Aluminium le Kentsoeng ka Stucco bakeng sa HVAC

5.5 Lisebelisoa tsa Khabiso le Mehaho

• Lisebelisoa tsa Leseli le Reflectors: Thepa ea ho arola khanya e etsa hore e tšoanelehe bakeng sa li-reflectors tse ka hare ho lisebelisoa tsa mabone, ho bopa bonolo, khanya e eketsehileng ntle le matheba a chesang.
• Khabiso Paneling: Bakeng sa likarolo tsa moralo oa kahare, mekotla e bonts'ang, le lisebelisoa tsa thekiso moo ho batloang tšepe e ikhethang.
• Lisebelisoa tsa Thepa: Ka moralo oa thepa ea sejoale-joale bakeng sa liphanele kapa likotoana tsa mantsoe.
• Mabokose a lisebelisoa le likhabinete tsa polokelo: Libaka tse tšoarellang le tse bohehang bakeng sa litharollo tsa polokelo e boima.

6. Melao ea indasteri le litifikeiti

Stucco embossing ka boeona hangata e hlalosoa ke mokhoa o hlalosoang ke bareki le mekhoa ea ponahalo, ha letlapa la motheo le liaparo li latela litekanyetso tse behiloeng.

Litšupiso tse tloaelehileng (Mehlala, eseng ka botlalo):

• Aluminium sheet/coil: ASTM B209 / B209M, IN 485 (thepa), IN 573 (tlhamo), Letoto la lihlooho tse JIS H4000 (lebatowa)
• Ts'ebetso ea ho roala li-coil: IN 13523 letoto; Ts'ebetso ea meralo ea PVDF hangata e tsamaellana le litebello tsa mofuta oa AAMA 2605 (moo ho hlokahalang)
• Mekhoa ea boleng: ISO 9001; ISO tikoloho 14001; ketane ea phepelo ea likoloi hangata IATF 16949 (haeba o sebeletsa mmaraka oo)
• Ho latela lik'hemik'hale (moo ho hlokehang): RoHS, Fihlella, Melao ea likhokahano tsa lijo bakeng sa maemo a itseng a ho kopanya / lisebelisoa (tshebediso e itseng)

Leqephe la Aluminium le khabisitsoeng ka Stucco bakeng sa Sehatsetsi

7. Taolo ea Boleng ba Huasheng le Litlhaloso tsa Stucco Embossed Aluminium Sheet

Litlhaloso tse khethehileng tsa Huasheng ha li phatlalatse ka mokhoa o ikhethileng 'me ha lia lokela ho qaptjoa.

Se latelang ke a profeshenale QC/spec moralo e loketseng bakeng sa OEM e kholo (mohlala, Huasheng) ho laola ho tsitsa ha mofani oa thepa - e bohlokoa joalo ka mohlala oa "litlhoko tsa QC tsa bareki."

7.1 Dimension le Gauge Control

• Botenya: mamello ± ka lebitso; hlalosa mokhoa (micrometer kapa tekanyo e lekantsoeng ea inthaneteng) le sampole (hlooho/bohare/mohatla; molemeng/bohareng/ka ho le letona)
• Bophara le bolelele: mameno a sehiloeng; squareness (bakeng sa maqephe)
• Bophahamo (bo-tla-le-tsa) /coil set: e hlalositse boholo ba kgeloho ka bolelele ba sekala

7.2 Embossing Pattern Uniformity

• Tlhaloso ea mohlala: lebitso la mohlala + phanele/ mohlala
• Metrics ea sebopeho: maemo a holimo-ho-ho-phula le/kapa liparamente tsa 3D tse lekantsoeng ka mokhoa oa profilometer/optical
• Tlhahlobo ea ponahalo: mabone a hlalosoang (mohlala, 5000K), angle, bohole, le meedi ya ho amohela melato, matshwao a roll, patchiness

7.3 Botšepehi ba Lintho

• Netefatso ea motsoako / bohale ka COA + licheke tsa nako le nako tsa motho oa boraro (boikhethelo)
• Meeli ea sekoli: menoana, mekgoapo, TLHOKOMELISO, tshenyo ya mathoko, matsatsi a phomolo a ho roala (haeba e koahetsoe)
• Bohloeki: masala / oli meeli pele ho barbotage / lamination mehato (haeba e sebelisoa likopanong)

7.4 Teko ea Thepa ea Mechini

• Thepa ea tensile (MD/TD) le bolelele (kamoo ho hlokahalang)
• Koba teko (bonyane radius ntle le ho petsoha) e tsamaellanang le ditlhoko tsa ho bopa karolo
• Liteko tsa ho roala haeba li koahetsoe: ho khomarela (crosshatch), Tšusumetso, thatafalo, setlolo sa letsoai/mongobo joalo ka ha ho hlokoa ke sehlopha sa tikoloho

8. Ho bapisoa le lisebelisoa tse ling

9. Qetello

Stucco Embossed Aluminium Sheet ke bopaki ba boqapi bo tsoelang pele ho saense ea lintho tse bonahalang le lits'ebetso tsa tlhahiso., ho fetola tshepe ya motheo hore e be sehlahiswa se ikgethang haholo le sa bohlokwa.

Paterone ea eona e ikhethang ea stucco, athe haholo-holo bokhabane, ka nako e tšoanang e fana ka melemo e tebileng ea ts'ebetso, haholo-holo keketseho e kholo ea karo-karolelano ea boima ba 'mele, kabo e sebetsang ya kganya, le bokhoni bo hlollang ba ho pata matheba a ka holimo.

Tšebeliso e tloaelehileng, li-alloys tsa aluminium tse utloisisoang hantle le mocheso, sesebelisoa sena se fana ka motsoako o nepahetseng oa ts'ebetso e bobebe, khanyetso ea kutu e ikhethang, le e kgahlang ka pono, bokaholimo bo tšoarellang.

Ho tloha ho matlafatsoa ka har'a li-jacket tse futhumatsang mocheso ho limela tsa indasteri ho ea ho khabiso ea meaho ea meaho le ho mamella mathata a likoloi tsa lipalangoang., Letlapa la aluminium le entsoeng ka stucco le fana ka mefuta e mengata, e hlokang chelete e ngata, le tharollo ea moshoelella.

Boleng ba eona bo tsitsitseng, e tšehetsoeng ke mekhoa e matla ea tlhahiso le taolo ea boleng, e netefatsa ts'ebetso e tšepahalang ho pholletsa le lits'ebetso tsa eona tse fapaneng.

Ha liindasteri lefats'eng ka bophara li ntse li tsoela pele ho phehella boikitlaetso bo bobebe, Ho Hlokobelitsoe Ho Tšoara, le likhetho tse tšoarellang tsa thepa, letlapa la aluminiamo le kentsoeng ka stucco le loketse khōlo e tsitsitseng le bohlokoa bo tsoelang pele, ho tiisa boemo ba eona joalo ka thepa e phahameng ea ts'ebetso ea khetho bakeng sa bokamoso.

FAQs

1) Na embossing eketsa matla a aluminium lakane?
E ka eketsa hanyenyane ho thatafala ha mosebetsi oa lehae, empa bakhanni ba ka sehloohong ba matla ke motsoako le bohale. Ho hatisa ka mokhoa o hlakileng ho ntlafala ponahalo ea sebono le ho satalla ho bonoang, eseng matla a motheo a ho tsikitlanya.

2) Ke hlalosa mokhoa oa stucco joang hore barekisi ba se ke ba "hlalosa" ka tsela e fapaneng?
Sebelisa a setsi sa mohlala, hlalosa metrics ea botebo ba sebopeho, le ho hlalosa maemo a ho hlahloba ponahalo (kgantsha, angle, bohole). "Stucco" feela ha e hlake haholo bakeng sa taolo e thata ea litlolo.

3) E na le letlapa le koahetsoeng le thata ho hloekisa ka lebaka la likhohlo tsa sebopeho?
Sebopeho se ka tšoasa litšila libakeng tse thata, empa liphahlo (haholo-holo li-coil tsa boleng bo phahameng) e ka ntlafatsa bohloeki. Khetho e lokela ho nahanoa sehlopha sa tikoloho le litebello tsa tlhokomelo.

4) Na letlapa le khabisitsoeng ka stucco le ka etsoa kapa la kobeha ka mor'a ho emboss?
Ee, empa ho theha meeli ho itšetlehile ka bohale, botenya, botebo ba emboss, le ho roala. Emboss e tebileng + ho halefa haholo hangata ho fokotsa ho tiea ho lumelletsoeng.

5) E leng molemo bakeng sa mehaho ea ka ntle: anodized kapa PVDF-coated stucco aluminium?
Ka bobeli li ka sebetsa. Li-coil tsa PVDF hangata li khethoa bakeng sa botsitso ba mebala le botsitso ba UV; anodizing e fana ka metallic finish le bokahodimo bo thata. Khetho e itšetlehile ka litlhoko tsa mebala, boima ba tikoloho, le lipakane tsa litšenyehelo.