Aluminom foil maka ikuku oyi

2024-09-18 09:25:21

Njirimara	Nkọwa
Aha ngwaahịa	Igwe ntụ oyi aluminom foil
Alloy	1100, 1200, 3102, 8011
Iwe	H22, H24, H26
Ọkpụrụkpụ	0.02-0.05mm
Obosara	200-1450mm
Ogologo/ Ibu	ahaziri
Dayameta nke ime	76mm ma ọ bụ 152mm

Na Huasheng Aluminom, anyị bụ ọkachamara n'ichepụta na ịzụ ahịa dị elu Aluminom foil maka ikuku ikuku, nke bụ ihe dị mkpa na usoro ikuku oyi nke oge a. A na-emezi foils aluminum anyị maka ịrụ ọrụ kacha mma, na-enye nkwalite thermal conductivity, iguzogide corrosion, yana ike ike maka ngwa HVAC dị iche iche.

Nkọwapụta Aluminom Foil maka Sistemụ ntụ oyi

Na Huasheng Aluminom, anyị na-enye nkọwa dị iche iche nke ihe mkpuchi aluminom iji gboo mkpa dị iche iche nke usoro ntụ oyi.

Nkọwapụta izugbe

Njirimara	Nkọwa
Aha ngwaahịa	Igwe ntụ oyi aluminom foil
Alloy	1100, 1200, 3102, 8011
Iwe	H22, H24, H26
Ọkpụrụkpụ	0.02-0.05mm
Obosara	200-1450mm
Ogologo/ Ibu	ahaziri
Dayameta nke ime	76mm ma ọ bụ 152mm

Kedu ihe kpatara eji aluminom foil na ikuku ikuku?

A na-eji foil aluminum eme ihe n'ọtụtụ ebe na usoro ntụ oyi maka ọtụtụ ihe kpatara ya:

Akwa Thermal Conductivity: Aluminom bụ ezigbo onye na-eduzi okpomọkụ, nke na-enye ohere ikuku ikuku na-ebufe okpomọkụ nke ọma n'etiti refrigerant na ikuku.
Nguzogide corrosion: A na-ekpughe akụkụ ikuku nke oge a na ọnọdụ gburugburu ebe obibi dị iche iche, gụnyere mmiri na kemịkalụ. Nguzogide corrosion eke eke aluminom foil, karịsịa na mkpuchi mgbochi corrosive, na-eme ka ọ dị ogologo ndụ.
Dị fechaa: Aluminom bụ ihe dị arọ, na-eme ka ọ dị mfe ịwụnye na ibelata mkpokọta nke ikuku oyi.
Enweghi ike: Enwere ike ịkpụzi foil aluminom n'ụzọ dị mfe ka ọ bụrụ ntù na atụmatụ ndị ọzọ dị mgbagwoju anya na-enweghị atụfu ike ya, na-eme ka ọ dị mma maka ndị na-ekpo ọkụ ọkụ.

Nkọwapụta Alloy-kpọmkwem

1100/1200 Aluminom foil

Ngwa	Ndị na-agbanwe ọkụ, evaporators
Uru Pụrụ Iche	Ike dị elu, ezigbo igwe
Ọkpụrụkpụ	N'ozuzu 0.1-0.3mm
Atụmatụ nhazi	Debe okpomọkụ na iru mmiri n'oge nhazi

8011 Aluminom foil

Ngwa	Ọkpụkpọ refrigerant, n'èzí unit casings
Uru Pụrụ Iche	Ezi igwe, ike dị elu
Ọkpụrụkpụ	N'ozuzu 0.08-0.2mm
Atụmatụ nhazi	Dị nro, dị mfe ịkpụzi na nhazi

3102 H26 Aluminom Foil

Ngwa	Condenser na nku nke evaporator
Uru Pụrụ Iche	Ike igwe dị elu, ikpo ọkụ ọkụ nke ọma
Iwe	H26, steeti siri ike zuru oke

Ụdị foil Aluminom maka Sistemụ ntụ oyi

Aluminom foil na-enweghị atụ

Ngwa	Ihe mkpuchi mkpuchi, mkpuchi
Alloy na iwe	1100 ma ọ bụ 1200, O iwe
Uru	Ọnụ-dị irè, isi nchebe
Ọdịmma	Nchekwa oke megide corrosion na mmiri mmiri

Hydrophilic Aluminom Foil

Ngwa	Ntụ na eriri igwe, na-eme ka nnyefe ọkụ dịkwuo mma ma na-egbochi corrosion
Alloy na iwe	8011, H24 iwe
Uru	Nbufe ọkụ emelitere, mgbochi corrosion
Ọdịmma	mkpuchi mkpuchi na-eyi ka oge na-aga

Hydrophobic Aluminom Foil

Ngwa	Na-egbochi nchịkọta mmiri na akụrụngwa
Alloy na iwe	Alloys ndị yiri ya dị ka foil hydrophilic, ọtụtụ mgbe 8011, H24 iwe
Uru	Na-egbochi nsogbu ndị metụtara mmiri, mma usoro arụmọrụ
Ọdịmma	Nwere ike na-eyi ka oge na-aga, irè nwere ike ịdị iche

Aluminom Mkpuchi Epoxy

Ngwa	Ọwa mmiri na-ekuku ikuku na ogwe maka ịdịte aka na mgbochi corrosion
Alloy na iwe	Na-adịkarị alloys dị ka 3003, H22 ma ọ bụ H24 iwe
Uru	Mmụba nguzogide corrosion, enwekwukwa anwụnta
Ọdịmma	Enwere ike ịgbawa ma ọ bụ chipping mkpuchi epoxy n'okpuru nrụgide

Foil Aluminom ekpuchiburu ya

Ngwa	Ọwa mmiri oyi maka mkpuchi na igbochi ntapu ikuku
Alloy na iwe	Ọtụtụ mgbe 1100, 1200 ma ọ bụ 8011, na iwe dị iche iche
Uru	Ihe mkpuchi emelitere, mbelata ikuku ntapu, nchebe megide condensation
Ọdịmma	Mkpuchi nwere ike na-emebi ka oge na-aga, na-emetụta arụmọrụ

Aluminom foil laminated

Ngwa	Mkpuchi na mma nnyefe ọkụ na usoro ntụ oyi
Alloy na iwe	Enwere ike iji ọtụtụ alloys mee ihe, a na-ahọrọkarị dabere na njirimara achọrọ
Uru	Ihe mkpuchi emelitere, arụ ọrụ nnyefe ọkụ ka mma, nhazi nhọrọ
Ọdịmma	Ihe dị arọ nwere ike imetụta mmachi oghere, na-achọ nlezianya lamination

Njirimara arụrụ arụ nke igwe oyi akwa aluminom foil

Alloy	Iwe	Ọkpụrụkpụ(Mmm)	Obosara (Mmm)	I.D.(Mmm)	Ihe eji arụ ọrụ
					Ike ọdụdọ (Mpa)	Ogologo oge(%)	Erichson (I, Mmm
1100 1200 3102 8011 8006	O	0.08-0.2 (+/-5%)	100-1400 (+/-1)	75/150/ 200/300/505	80-110	≥27	≥6.0
	H22				100-135	≥22	≥5.5
	H24				115-145	≥20	≥5.0
	H26				125-160	≥10	≥4.5
	H18				≥160	≥1	-
Enwere ike ịmepụta nkọwa pụrụ iche dị ka ihe ndị ahịa chọrọ

Ngwakọta kemịkalụ nke ikuku ntụ oyi aluminom(%)

Alloy	Na	Fe	Ku	Mn	Mg	Cr	Zn	N'ime	Nke	Ndị ọzọ	Al
AA1200	1.00	0.05	0.05	-	-	0.10		0.05	0.05	0.15	>= 99.00
AA3102	0.40	0.70	0.10	0.05-0.4	-	-	0.30		0.10	0.05	<= 97.8
AA8011	0.5-0.9	0.6-1.0	0.10	0.20	0.05	0.05	-		0.10	0.08	97.3 – 98.9
AA8006	0.40	1.2-2.0	0.30	0.3-1.0	0.10	-	0.10	0.10	0.05	0.05	95.9 – 98.5

Ihe ngosi nka na ụzụ isi nke ihe mkpuchi ikuku aluminom na-enweghị mkpuchi

Ngwakọta kemịkalụ: Key alloy akara ule gụnyere 1100, 1200, 8011, onye ọ bụla a họọrọ dabere na ihe eji arụ ọrụ chọrọ na ịdị mfe nhazi.
Ihe eji arụ ọrụ: Tinye ike tensile, elongation, na cupping ụkpụrụ, nke dị oké mkpa maka ịrụ ọrụ nke nku ọkụ mgbanwe okpomọkụ.
Ọnọdụ ojiji: Iwe nke foil aluminum, dị ka H22, H24, H26, na-emetụta ike ya na plasticity.

Isi ihe ngosi nka nka nke mkpuchi mkpuchi aluminom mkpuchi

Ụdị efere: Ihe dị mkpa maka usoro mmepụta, na-achọ ụdị efere dị mma.
Ịrụ ọrụ mkpuchi: Na-agụnye ọkpụrụkpụ mkpuchi, adhesion, hydrophilic arụmọrụ, na nguzogide corrosion, karịsịa maka hydrophilic aluminum foil.
Mkpuchi Ọkpụrụkpụ: Ekwesịrị ịchịkwa n'okpuru 3/1m iji metụta ihe ngosi arụmọrụ mkpuchi.
Mkpuchi Adhesion: Na-anọchite anya nkwụsi ike nke mkpuchi na foil aluminum, na-emetụta nkwụsi ike ngwaahịa n'oge nhazi na ojiji.
Ihe onwunwe Hydrophilic: Mmekọrịta nke ihe mkpuchi aluminom na mmiri, enyocha ya site na akụkụ kọntaktị.
Nguzogide corrosion: Na-agụnye nguzogide alkali, nnu ịgbasa corrosion eguzogide

Ajụjụ gbasara Aluminom foil maka ikuku ikuku

Q1: Kedu ihe a na-atụ aro nke aluminom foil maka ikuku oyi?

A1: Ihe kachasị mma na-adabere na ngwa ahụ, mana ọ na-adịkarị site na 0.08mm ruo 0.2mm.

Q2: Enwere m ike ịhazi mkpuchi na foil aluminum?

A2: Ee, anyị na-enye mkpuchi dị iche iche, gụnyere hydrophilic, mgbochi corrosive, na mkpuchi na-acha anụnụ anụnụ, iji gboo mkpa gị.

Q3: Kedu ihe alloys ị na-enye maka ntụ oyi aluminum foil?

A3: Anyị na-enye alloys dị ka 1100, 8011, na 3102 maka ngwa HVAC.

Q4: Aluminom foil gị ọ bụ enyi na enyi?

A4: Ee, aluminom foil bụ 100% enwere ike imegharị ya, na-eme ka ọ bụrụ nhọrọ dị mma na gburugburu ebe obibi maka usoro ikuku oyi.

A na-eji ngwaahịa foil aluminum anyị eme ihe n'ọtụtụ ụlọ ọrụ na ngwa dị iche iche, gụnyere nkwakọ ngwaahịa, ụgbọ ala, ihe owuwu, electronics na ụlọ. Nke a bụ ọmụmaatụ ụfọdụ ngwa: