| Khalefo | O, H32, H34, H36, H111, etc. |
| Bophara (mm) | 25, 50, 100, 150, 200, 250, etc. |
| Matla a tšepe | 110 ho 300 MPa (15 ho 44 x 103 psi) |
| Kotulo Matla | 49 ho 270 MPa (7.2 ho 39 x 103 psi) |
| Elongation | 7.3 ho 21 % |
Rea u amohela ho HuaSheng Aluminium, molekane oa hao ea tšepahalang bakeng sa lintho tsohle tse amanang le 6063 Aluminium Hlobola. Lefatšeng la li-alloys tsa Aluminium, the 6063 strip e hlahella e le lisebelisoa tse feto-fetohang le tse sebelisoang haholo liindastering tse fapaneng. Tataiso ena e tebileng e etselitsoe ho fana ka kutloisiso e felletseng ea 6063 Aluminium Strip, ho tsepamisa maikutlo hodima matlotlo a yona, lits'ebetso, mathata, le tharollo ea ho hlomella bahlahisi, baenjiniere, le basebelisi ba ho qetela ba nang le tsebo e hlokahalang bakeng sa tšebeliso e nepahetseng.
The 6063 Aluminium Strip ke motsoako o phekolehang mocheso oo e leng karolo ea letoto la 6xxx. E tumme ka extrudability ea eona e phahameng, sebopehong, le khanyetso ea kutu, ho e etsa khetho e holimo bakeng sa lits'ebetso tse hlokang libopeho le liprofaele tse rarahaneng.
Thepa ea 6063 Aluminium Strip ke eona e etsang hore e hlahelle indastering:
| Thepa | Tlhaloso | Molemo | Kopo |
| Extrudability | Bokhoni ba ho fetisetsoa ka libopeho tse rarahaneng | E ntle bakeng sa libopeho le li-profile tse rarahaneng | Indasteri ea kaho bakeng sa litlaleho tsa meralo |
| Formability | Bokhoni ba ho bōptjoa le ho kobeha | Sebopeho se setle ntle le ho sekisetsa thepa ea mochini | Lisebelisoa tse rarahaneng tsa moralo |
| Khanyetso ea Corrosion | Ho hanyetsa ho bola | Khanyetso e babatsehang bakeng sa libaka tse ka ntle le tse senyang | Likarolo tsa meralo le tsa likoloi |
| Phekolo ea Mocheso | E ka tšeloa mocheso bakeng sa ho ntlafatsa thepa | Menyetla ea ho matlafatsa | Likarolo tsa sebopeho tse hlokang matla a eketsehileng |
| Boipiletso ba Aesthetic | Qetello e khahlisang ka pono | Qetello e boreleli ea bokaholimo | Likhabiso tse khabisitsoeng, thepa ea ka tlung |
Thepa e ikhethang ea 6063 Aluminium Strip e bakoa ke sebopeho sa eona se ikhethileng sa lik'hemik'hale:
| Element | Mefuta e fapaneng |
|---|---|
| Aluminium, Al | <= 97.5 % |
| Chromium, Kr | <= 0.10 % |
| Koporo, Cu | <= 0.10 % |
| Tšepe, Fe | <= 0.35 % |
| Magnesium, Mg | 0.45 – 0.90 % |
| Manganese, Mong | <= 0.10 % |
| Tse ding, enngwe le enngwe | <= 0.05 % |
| Tse ding, kakaretso | <= 0.15 % |
| Silicone, Le | 0.20 – 0.60 % |
| Titanium, Ea | <= 0.10 % |
| Zinki, Zn | <= 0.10 % |
Thepa ea mochini e bohlokoa bakeng sa ts'ebetso ea 6063 Aluminium Strip lits'ebetsong tse fapaneng:
| Thepa | Boleng | Tlhaloso |
| Matla a tšepe | 110 ho 300 MPa (15 ho 44 x 103 psi) | Khatello e kholo tlas'a tsitsipano |
| Kotulo Matla | 49 ho 270 MPa (7.2 ho 39 x 103 psi) | Khatello ea maikutlo nakong ea deformation ea polasetiki e qala |
| Elongation at Break | 7.3 ho 21 % | Bolelele bo eketseha pele ho phatloha |
| Ho thatafala (Brinell) | 25 ho 95 HB | Ho hanyetsa ho indentation |
Ho utloisisa litšobotsi tsa 'mele ke senotlolo sa ts'ebeliso e nepahetseng:
| Thepa | Boleng | Tlhaloso |
| Botenya | 2.70 g/cm³ | E bontša ho kopana ha lintho |
| Melting Point | 616 – 654 °C (1140 – 1210 °F) | Phetoho ho tloha ho tiileng ho isa ho metsi |
| Thermal Conductivity | 218 W/m·K | Bokhoni ba ho tsamaisa mocheso |
Ho sa tsotellehe melemo ea eona e mengata, ho sebetsa le 6063 Aluminium Strip e hlahisa mathata a itseng:
| Hlahisa | Tlhaloso | Tšusumetso |
| Ho ngoapa le ho ntša meno | Ho utloa ho senyeha ha bokaholimo | Mathata a botle le sebopeho |
| Sebopeho sa Oxide | E etsahala nakong ea tlhahiso le polokelo | Botle bo fokotsehileng le ho senyeha ho ka bang teng |
| Hlahisa | Tlhaloso | Tšusumetso |
| Weld Cracking | Ho ba le ts'oaetso nakong ea ts'ebetso e itseng ea welding | Botšepehi bo senyehileng ba sebopeho |
| Porosity | E etsahala ka li-welds | Matla a fokotsehileng le ts'oaetso ea ho bola |
| Hlahisa | Tlhaloso | Tšusumetso |
| Ho phatloha nakong ea ho thehoa | Li-parameter tse sa lekaneng tsa ho theha | Likarolo tse hanoang le litšenyehelo tse eketsehileng |
| Springback | Ka mor'a ho theha | E ama ho nepahala ha dimensional |
Ho hlola mathata ana, HuaSheng Aluminium e fana ka maikutlo a maqheka a latelang:
Ho u thusa ho utloisisa ka botlalo, mona ke likarabo tsa lipotso tse tloaelehileng:
1. Selelekela 3003 aluminium……
1. Selelekela Joalo ka indasteri……
Selelekela Lefatšeng la……
8011 H18 blister aluminium fo ……
Selelekela ho 1050 Epoxy C……
1. Selelekela 8011 Embosse……
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
