| ʻĀpana | Hōʻike |
| Alloy | 5A06 |
| Ka huhū | O, H12, H14, H18, H22, H32, etc. |
| ʻO ka mānoanoa | 2.64 g/cm³ |
| Lahi nui (ʻO ka mānoanoa x ka laulā x ka lōʻihi) | 0.2mm – 6mm x 500mm – 2200mm x 800mm – 6000mm |
| Lapaʻau ʻili | Mill Finish, Anodized, Ka pauda, Palaki, Hoʻomaʻamaʻa ʻia |
5A06 pepa alumini he hana kiʻekiʻe, non-heat-treatable aluminum-magnesium (Al-Mg) huikau, renowned for its exceptional strength, ʻoi aku ka maikaʻi o ka corrosion, a me ka welau maikaʻi.
Ma ke ʻano he lālā o ka moʻo 5xxx, ʻO kāna hiʻohiʻona wehewehe kiʻekiʻe loa ka magnesium maʻiʻo (maʻamau 5.8-6.8%), ʻo ia ka mea e kau ai ma luna o ka echelon o ka ikaika ma waena o nā alumini alumini paʻakikī.
Me ka ikaika tensile pinepine ma mua 315 MPa, ʻoi aku ia ma mua o nā mea hoʻohui kai maʻamau e like me 5083, hana ia i mea kūikawā no nā noi e koi ana i ka ikaika kiʻekiʻe ma kahi hale welded.
ʻOiai ua hoʻohana mua ʻia kāna mau noi mua i ka nā ʻāpana aerospace a me nā pūʻali koa—no nā mea e like me nā pahu wahie welded, nā pahu pahi kaua, a me ka pale kaua māmā—e lawelawe pū ana nō hoʻi ia ma nā wahi ʻē aʻe.
ʻO kāna hui like ʻole o ka weldable ikaika kiʻekiʻe a me ka lōʻihi e hana ai i ka 5A06 i koho kūpono no nā hale koʻikoʻi kahi i hiki ʻole ai ke hoʻololi ʻia ka hana a kahi i hiki ʻole ai i nā ʻāpana wela wela e like me ka 7xxx series ma muli o kā lākou weldability maikaʻi ʻole..
5A06 pepa alumini
Loaʻa ka hana o ka 5A06 alloy mai ke koena elemental pololei i hoʻopaʻa ʻia ma o nā makahiki o ka noiʻi metallurgical Kina.:
| ʻElemu | Hōʻike (wt%) | Hana Hana |
|---|---|---|
| Aluminum (Al) | Kaulike (≥92.5%) | Matrix; kumu kūʻē corrosion |
| Magnesium (ʻO Mg) | 5.8–6.8 | Hoʻoikaika paʻa i ka hoʻonā; ʻāpana-β (Al₈Mg₅) kumu |
| Manganese (ʻO Mn) | 0.50-0.80 | ʻO ka hoʻomaʻemaʻe palaoa; Hoʻokumu ʻia ʻo Al₆Mn dispersoid |
| Silika (A) | 0.40-0.80 | Ka hoolei wai; Mg₂Si ua; hoonui anodizing |
| Titanium (O) | 0.02–0.10 | ʻO ka hoʻoheheʻe ʻana i ka palaoa DC; pale i ka haki ʻana o ingot |
| Beryllium (E) | 0.0001–0.005 (koho) | Kāohi ʻana i ka hoʻoheheʻe ʻana; hoemi i ka lepo |
| Hao (ʻO Fe) | Ç0.40 | Hoʻomaʻemaʻe ʻia; Al₃Fe palena palena |
| keleawe (Cu) | ≤0.10 | palena paʻa; pale i ka maʻi SCC |
| Zinc (ʻO Zn) | ≤0.20 | Ka palena; pale ʻana i ka corrosion galvanic |
| Chromium (Cr) | ≤0.20 (koena) | Ka mana hoʻohāinu |
| ʻO nā mea ʻē aʻe (kēlā me kēia) | ≤0.05 | - |
| ʻO nā mea ʻē aʻe (huina) | ≤0.15 | - |
| Ka huhū | Hōʻike wehewehe | UTS (MPa) | Hāʻawi 0.2% (MPa) | Elongation he50 (%) | ʻoʻoleʻa (HB) | Nā noi maʻamau |
|---|---|---|---|---|---|---|
| O (Hana ʻia) | 380–420°C/2–4h, kapuahi hau | 315–375 | 155–215 | 15-22 | 75-95 | Hana hohonu, anodized optical housings, mea hana cryogenic |
| H12 | Hana anu ~25% mai O | 340–400 | 260–320 | 8-15 | 85–105 | Hoʻokumu haʻahaʻa, nā pale hana, nā lako kai |
| H14 | Hana anu ~35% mai O | 360–420 | 290-350 | 6-12 | 95–115 | Rivets, mea paa, clips, punawai |
| H16 | Hana anu ~ 50% mai O | 380–440 | 320–380 | 4-8 | 105-125 | Uea ikaika kiʻekiʻe, punawai pololei |
| H18 | Hana anu ~75% mai O | 400–460 | 360–420 | 3–6 | 110-130 | ʻO nā pūnāwai ikaika kiʻekiʻe, diaphragms |
| H22 (H12 + hoʻopaʻaʻia) | H12 + 250–300°C/2h | 340–400 | 250-310 | 10-16 | 85–105 | Nā hale kai kū i ke koʻikoʻi-corrosion |
| H24 (H14 + hoʻopaʻaʻia) | H14 + 280–320°C/2h | 360–420 | 280-340 | 8–14 | 95–115 | ʻO ka ikaika kaulike / ductility no nā hale welded |
| H32 | H12 + hoʻokūpaʻa | 340–400 | 250-310 | 10-16 | 85–105 | Nā noi pale SCC (like me H22) |
| H112 | Hoʻopau hana wela | 295–355 | 130-190 | 12-20 | 70-90 | Papa hana maʻamau, ʻāpana mānoanoa |
Ka holomua o ka ikaika:
Ua ʻoi aku ka nui o ka palena o ka O-temper o 315–375 MPa UTS ma mua o 5083-H116 (305–385 MPa) a kokoke i 5383-H116 (370–420 MPa), e hōʻike ana i ka hoʻoikaika paʻa paʻa o 5A06.
Loaʻa ka hana anu i ka H18 i ka 400–460 MPa, hoʻokūkū ʻo 6061-T6 hiki ke mālama i ka wela (290–330 MPa) me ka ʻole o ka hana wela.
Nā Kūʻai Kūʻai Ductility:
E emi ana ka elongation mai 15-22% (O) i 3–6% (H18), ma muli o nā pilina paʻakikī hana maʻamau.
Eia naʻe, 5Mālama ʻo A06 i ka ductility kiʻekiʻe ma nā pae ikaika like i hoʻohālikelike ʻia me 5056 ma muli o nā mīkini hoʻololi i hoʻonui ʻia i ke silika.
Nā ʻano Anisotropy:
Hoʻopuka ka papa kuhikuhi anisotropy planar Δr = 0.2–0.4 i ka 8–12% e lohe ana i ke kiʻi kīʻaha cylindrical—hiki ke hoʻokele ʻia ma o ka hoʻonui ʻana i ka paʻa paʻa ʻole a me ka koho lubricant..
2mm 5A06 pepa alumini Ka ho'āʻo mānoanoa
| Waiwai | Waiwai | Koikoʻi noi |
|---|---|---|
| ʻO ka mānoanoa | 2.64 g/cm³ | 2% ʻoi aku ka māmā ma mua o 5083; mea koʻikoʻi no ka hoʻolilo kālā aerospace |
| Hoʻohemo melū | 568–640°C | ʻO ka maʻiʻo Mg haʻahaʻa ma mua o ka palena kiʻekiʻe e hōʻemi i ka liquidus; pili i nā palena wili |
| ʻO ka hoʻoili wela | 115 W/(m·K) ma 20°C | He kūpono no ka hoʻopau ʻana i ka wela; 10% haʻahaʻa ma mua o 5083 ma muli o ke kiʻekiʻe o Mg |
| Hoʻolima Uila | 26% IACS | Haʻahaʻa ma mua o 5083 (29%); ʻoi aku ka nui o ka hoʻomehana resistive i nā noi uila |
| Coefficient o ka hoonui wela | 24.0×10⁻⁶/°C | Haʻawina hoʻolālā: 2.4 mm/m no 100°C ΔT |
| Kaha Wela Kūikawā | 880 J/(kg·K) | Helu helu wela wela no nā ʻōnaehana cryogenic |
| Elastic Modulus | 70.5 GPa | Ua like like me nā huila 5xxx ʻē aʻe i loko o ke ana pololei |
| Ka Laki o Poisson | 0.33 | Maʻamau no nā alumini alumini |
Ka hana ana o 5A06 pepa alumini pili loa i ka hana ʻana a me ka hana ʻana.
No ka mea, he 5A06 a kiʻekiʻe-magnesium, ʻAʻole hiki ke mālama ʻia i ka wela Al-Mg alloy, kona ikaika mechanical, pale ʻino, a ʻo ka hilinaʻi o ka hana ʻana e hilinaʻi ʻia i ka mana pololei o ke kemika alloy, deformation, a me ka moʻolelo wela i ka hana ʻana.
Hoʻomaka ka hana ʻana me alumini mua maʻemaʻe kiʻekiʻe, hoʻohui ʻia inā kūpono e ka alumini recycled kūpono.
ʻO nā mea hoʻohui - ma mua magnesium (5.8–6.8%), me ka manganese a me ka chromium-ua hoʻohui ʻia ma lalo o nā kūlana hoʻomalu paʻa.
Pono pono ka hoʻohuihui pono ʻana, no ka mea, hiki i ka liʻiliʻi liʻiliʻi o ka ʻike Mg ke hoʻopilikia nui i ka ikaika a me ka hana corrosion.
Ma hope o ka hui ʻana, hooleiia ka metala hehee iloko nā papa ʻōwili me ka hoʻohana ʻana i ke anuanu (DC) hoolei ana.
A laila hoʻopau kēia mau papa homogenization wela lapaʻau, maʻamau i ka laulā o 450–500 °C.
Homogenization lawelawe i:
Hoʻowili wela ʻia nā papa homogenized i nā mahana kiʻekiʻe e hōʻemi i ka mānoanoa a hoʻomaʻemaʻe i ke ʻano o ka palaoa. I loko o kēia pae:
Mālama ka mālama ʻana i ka mahana i ka haki ʻana o ka ʻili a hōʻoia i ka hana deformation paʻa, He mea koʻikoʻi loa ia no nā ʻāpana Mg kiʻekiʻe e like me 5A06.
Ma hope o ka'ōwili wela, ua hana hou ia na mea e kaʻaʻa anuanu e hiki i ka mānoanoa hope a hoʻomaikaʻi i ka maikaʻi o ka ʻili.
ʻO nā pōmaikaʻi o ka ʻōwili anu:
Kaʻina ʻōwili pepa alumini
Ma muli o ka huhū makemake, hiki ke loaʻa ka palapala:
Loaʻa ka hana hope:
Mahalo i kāna ikaika kiʻekiʻe, ʻoi aku ka maikaʻi o ka corrosion, kūlana weldability, a me ke ano mama, 5Hoʻohana nui ʻia ka pepa alumini A06 i nā ʻoihana e koi ana i ke ola lawelawe lōʻihi a me ka hilinaʻi o ka hoʻolālā.
ʻO kāna mau hana maikaʻi e kūpono loa ia no nā hale welded e hana ana ma nā kaiapuni corrosive a kiʻekiʻe paha.
ʻO kekahi o nā wahi noi nui loa no ka pepa alumini 5A06 ʻenekinia moana.
Hoʻohana ʻia ka pepa alumini 5A06 no ka hana moku
E koho maʻamau nā ʻenekinia 5A06 pepa alumini no nā moku kaomi a me nā ʻōnaehana mālama i ka wā e kū ai ka corrosion a me ka hoʻohaʻahaʻa kaumaha..
I loko o ka ʻoihana halihali, 5Kākoʻo pepa alumini A06 ka hoʻolālā māmā a me ka ikaika o ka ikehu.
Hoʻohana nā mea hoʻolālā i ka pepa alumini 5A06 i ka pale a me ka aerospace-e pili ana i nā noi no ka mea hāʻawi ia i kahi kiʻekiʻe kiʻekiʻe o ka ikaika-a-kaumaha a me ke kūpaʻa ikaika i ka pōʻino o ke kaiapuni..
ʻO ka pale ʻana o ka corrosion o 5A06 alumini pepa e waiwai ai i loko ka hana kemika a me nā wahi ʻoihana.
5A06 pepa alumini no ka ipu kemika
5ʻIke ʻia ka pepa alumini A06 ma ke ʻano he kiʻekiʻe-hana Al-Mg alloy ka mea e hoʻohui i ka ikaika mechanical, pale ʻino, a me ka hilinaʻi hana.
ʻO kēia mau mea maikaʻi e lilo ia i mea makemake no ka moana, kaʻahele, moku kaomi, a me nā palapala hoʻolālā e pono ai ka lōʻihi lōʻihi a me ka māmā māmā.
ʻO kekahi o nā mea maikaʻi loa o ka pepa alumini 5A06 ʻo ia ʻoi aku ka maikaʻi o ka corrosion, i loko o kaiapuni moana a me ka wai.
5Hāʻawi ka pepa alumini A06 i kahi ke kaulike ikaika ma waena o ka ikaika mechanical a me ka haʻahaʻa haʻahaʻa, ka hāʻawi ʻana i ka maikaʻi o ke kūkulu ʻana.
ʻAʻole like me nā alumini alumini wela, 5Mālama ʻia ka pepa alumini A06 mau waiwai mechanical ma hope o ke kuʻi ʻana, i mea kūpono no nā hale hana paʻakikī.
5Hōʻike ka pepa alumini A06 a pane anodizing kiʻekiʻe, hoʻohui i ka waiwai hana a me ka nani.
Anodized 5A06 pepa alumini
| Waiwai / paena | 5A06 | 5083-H116 | 5052-H32 | 5456-H116 | 6061-T6 | A36 Haʻahaʻa kila |
|---|---|---|---|---|---|---|
| Papa waiwai | Al–Mg (kiʻekiʻe Mg) | Al–Mg (papa moana) | Al–Mg (hiki ke hana) | Al–Mg (ikaika kiʻekiʻe) | Al–Mg–Si (hiki ke mālama i ka wela) | Fe-C |
| ʻO ka mānoanoa (g · cad) | ~2.66 | ~2.66 | ~2.68 | ~2.67 | ~2.70 | ~7.85 |
| Hāʻawi ʻia he Rp0.2 (MPa) | ~150–180 | ≥215 | ~140–195 | ~250–300 | ~275–310 | ~250 |
| Hoʻopaʻa ʻia Rm (MPa) | ~315–380 | ~305–385 | ~210–260 | ~340–405 | ~310–350 | ~400–550 |
| Elongation A (%) | ~10–15% | ≥10–12% | ~8–18% | ~10–12% | ~8–12% | ~15–25% |
| Hiki ke mālama i ka wela | ʻAʻole | ʻAʻole | ʻAʻole | ʻAʻole | ʻAe | ʻAʻole |
| Weldability | Maikaʻi (MIG/TIG/FSW) | Maikaʻi | Maikaʻi | Maikaʻi–Maikaʻi | Maikaʻi loa (weld HAZ nāwaliwali) | Maikaʻi (pono e pale i ka corrosion) |
| ʻO ke kūpaʻa ʻino ʻana i ka wai kai | Maikaʻi loa | Maikaʻi (papa moana) | Maikaʻi loa (kaiapuni palena) | Maikaʻi loa—Maikaʻi | Kaumaha (pono i ka uhi) | ʻilihune (pono nā uhi / cathodic prot.) |
| Intergranular/exfoliation pilikia | Haʻahaʻa ke hana ʻia | Haʻahaʻa (H116 mana) | Haʻahaʻa | Haʻahaʻa (H116 mana) | Haʻahaʻa | N / a |
| Hana luhi | Maikaʻi loa (weld kiko'ī koʻikoʻi) | Maikaʻi loa | Kaumaha | Maikaʻi loa | Maikaʻi loa | Maikaʻi loa |
| Nā noi maʻamau | Nā ʻāpana moana ikaika kiʻekiʻe, moku kaomi, nā pahu pahu, nā panela hale | Ka uhi ʻana o ka hull, nā pahu pahu, nā hale o waho | Nā pahu wahie, nā mea i hana ʻia, ducts | ʻO nā pā hull ʻoi aku ka ikaika, nā lālā hoʻolālā | Nā pā, KahawaiOli, ʻāpana mīkini | ʻO nā hull kaumaha, nā papa hoʻonohonoho i kahi lua o ke kaumaha |
| Hoʻolālā kālepa-offs | Mg kiʻekiʻe → ikaika kiʻekiʻe + ʻino maikaʻi; hiki ke mālama i ka wela | Lio hana moana — hōʻike ʻia ka hana kaiapuni | ʻOi aku ka maikaʻi no ka formability a me ka hoʻokele waiwai; ʻaʻole no ka luʻu lōʻihi | ʻOi aku ka ikaika static (kumu kūʻai) | ʻOi aku ka ikaika kiʻekiʻe (akā pono ka mālama corrosion) | Māmā, ikaika, mea prheys, hoʻokō Hono |
Huasheng Aluminum he mea hoʻolako alumini ʻoihana i hoʻolako ʻia e hoʻopuka kiʻekiʻe 5A06 pepa alumini no nā noi koi.
Ma ka hoʻohui ʻana i ka ʻike hana hana me ka hōʻoia maikaʻi, Kōkua ʻo Huasheng Aluminum i nā mea kūʻai aku e hōʻemi i ka pilikia a hoʻomaikaʻi i ka pono o ka papahana.
5A06 pepa alumini ʻaʻole ia he mea maʻamau; he a ʻenehana loea kūikawā i hoʻolālā ʻia no nā mea kiʻekiʻe.
Hōʻike ia i ka piko o ka ikaika i loko o ka ʻohana o ka non-heat-treatable, nā alumini alumini weldable.
ʻAʻole pili kona waiwai i kāna versatility, akā i kona hiki ke hāʻawi i kahi hoʻonā pono nui no kahi ākea ākea akā koʻikoʻi o nā noi i ka aerospace, pūʻali koa, a me nā ʻāpana kai kiʻekiʻe.
No nā mea ʻenekinia e hoʻoponopono nei i nā pilikia kahi e hoʻokō ʻia ai ka ikaika kiʻekiʻe me ka ʻole o ka kaumaha ʻana i ka weldability, 5Ke kū nei ʻo A06 ma ke ʻano he koho waiwai a ikaika.
Q1: He 5A06 pepa alumini ka wela wela?
ʻAʻole. 5ʻO A06 kahi huila hiki ʻole i ka wela; ʻO kona ikaika mai loko mai o ka magnesium a me ka hana paʻakikī.
Q2: He kūpono ka 5A06 no nā kaiapuni kai?
ʻAe. Hāʻawi kona ʻano magnesium kiʻekiʻe i ke kūpaʻa maikaʻi i ka wai kai a me nā lewa moana.
Q3: Pehea ka 5A06 e hoohalike ai me 5083 aluminika?
Hāʻawi nā mea ʻelua i ke kūpaʻa corrosion maikaʻi loa; 5Hāʻawi maʻamau ʻo A06 i ka ikaika kiʻekiʻe iki, oiai 5083 ʻoi aku ka maikaʻi o ka honua no ka hana moku.
Q4: Hiki i ka 5A06 pepa alumini ke wili maʻalahi?
ʻAe. Loaʻa iā ia ka weldability maikaʻi me ka liʻiliʻi o ka nalowale o nā waiwai mechanical ma hope o ka wili.
Q5: He aha ka mānoanoa i loaʻa?
5Loaʻa pinepine ʻia ka pepa alumini A06 mai nā pepa anana lahilahi a i nā papa mānoanoa, ma muli o ka noi a me ka hiki ke hoʻolako.
Hoʻolauna I ka honua o……
8011 H18 blister alumini no……
Hoʻolauna i 1050 Epoxy C……
1. Hoʻolauna 8011 Embosse……
1. Hoʻolauna i 3003 Alum……
Hoʻolauna Aluminum uhi ʻia……
Henan Huasheng Aluminum Co., Ltd (HHALU no ka pōkole), kukuluia ma 2001, aia ma ke kaona o Huiguo, ke kapikala Aluminum kaulana o Henan Province, He mea hana ʻoihana a komo i ka noiʻi, hooulu ana, hana ʻana, kūʻai aku a me ka lawelawe o aluminika papa lau, alumini coil, alumini pepa, ʻāpana alumini a me ka pōʻai alumini.
Kahi mea hou aʻe, Ke kūʻai aku nei ʻo HHALU i ka pā alumini no ke kūkulu ʻana a me nā moku, pā aniani aluminika, a me ka pā alumini alumini kaʻa.
No.53, Alanui Dongming, Zhengzhou, Henan, Kina
Kuleana kope © Huasheng Aluminum 2025. Ua mālama ʻia nā kuleana āpau.
