| Impahla | Inani |
| Okujwayelekile | I-ASTM B209, IN 573-3, IN 485-2, I-AMS QQ-A-250/11 |
| Ubukhulu | 0.2mm - 500 mm |
| Ububanzi | Kufika ku-2650 mm |
| Ubude | Enza ngendlela oyifisayo |
| I-Surface Qeda | Isigayo, ibhulashi, i-anodized, i-powder-camera |
5754 ipuleti elicwengekileyo le-aluminium iyiphethini ye-aluminium plate ekhiqizwa kusukela ku- 5754 ingxubevange futhi ihlinzekwa ngohlu lwamageji namaphethini okunyathela (idayimane/ilozenge, 3-ibha, 5-ibha, abaphathi abayindilinga).
Onjiniyela baklama umkhiqizo ukuze balethe ukumelana nokushelela, ukuqina kwendawo, kanye nokuqina okubukwayo. Abasebenzisi bavame ukusisebenzisa emikhunjini nasezikhunjini zesikebhe, izitebhisi, imoto flooring, finyelela amapulatifomu, izindlela zokuhamba zezimboni, kanye nokuqedwa kwezakhiwo ezidinga ukumelana nokugqwala, ukushisela, nokusebenza kwe-anti-slip.
Lesi sihloko sinikeza abaklami namaqembu okuthenga okusebenzisekayo, ulwazi olugxile kwezobunjiniyela: ukwakheka kanye nokuziphatha kwemishini, ukusebenza kokugqwala, ukukhiqiza kanye nemingcele yephethini yangaphezulu, izinzuzo kanye nemikhawulo, izicelo, futhi kanjani 5754 ipuleti lokunyathela liqhathaniswa nezinye izinto.
5754 I-Aluminium Tread Checkered Plate
I 5754 ingxube ye-aluminium i-aluminium-magnesium alloy (5Umndeni we-XXX). Ububanzi bokuqamba obujwayelekile (isisindo %) esetshenziselwa ukukhetha kanye nokucaciswa kukhonjisiwe ngezansi.
Idinga Izitifiketi Zokuhlola I-Mill (Ama-MTCS) ukuze uthole amanani okwamukelwa kuyo yonke indawo.
| Isici | Ibanga elijwayelekile (wt%) |
|---|---|
| Al (ukuzimelela) | Ibhalansi |
| Mg (i-magnesium) | 2.6 - 3.6 |
| UMn (manganese) | 0.3 - 0.6 |
| Futhi (i-silicon) | ≤ 0.40 |
| Fe (insimbi) | ≤ 0.40 |
| Cr (i-chromium) | ≤ 0.30 |
| Cu (ithusi) | ≤ 0.10 |
| Zn (zinc) | ≤ 0.20 |
| Kwe, abanye | Landamisa / kulawulwa (≤ 0.15 ngamunye) |
Amanothi: I-magnesium iyisici esiyinhloko esiqinisayo futhi inomthelela ekuqineni kwamanzi olwandle. 5754 iqukethe uMg eningi kune 3003/1100 uchungechunge kanye nama-alloys asolwandle angaphansi kwamandla aphezulu njenge 5083.
Amanani emishini ancike kakhulu entukuthelweni nasekushubeni. Ithebula elingezansi liyahlinzeka izigaba zobunjiniyela ezimele ngenxa yentukuthelo evamile esetshenziswa ku-tread plate (H22, Izinhlobonhlobo ze-H111/H116 zisetshenziswa kuye ngokuthi umshini wokugaya usetshenziswa kanjani):
| Impahla | Ibanga elijwayelekile (ummeli) |
|---|---|
| 0.2% ubufakazi / Veza (I-MPa) | ~120 - 185 |
| Amandla okugcina (I-UTS, I-MPa) | ~220 - 290 |
| Ukwelula (%) | ~7 – 15 |
| Ukuqina kweBrinell (HB) | ~55 - 75 |
| I-modulus encane (E) | ≈ 69 I-GPa |
| Ukuminyana | ≈ 2.66 - 2.70 g/cm³ |
Iseluleko sokuklama: sebenzisa i-minima eqinisekisiwe yomphakeli ukwakha amandla futhi uqinisekise ulaka (H22, H114, H116 njll.) ekudwebeni ama-callouts. Kumadekhi esakhiwo azwela ukukhathala noma asindayo ancamela amamaki aphezulu angu-5xxx (isib., 5083).
Ukuhlolwa kokugoba kwe 5754 Ishidi le-Aluminium
I-Huasheng Packaged 5754 Ishidi le-Aluminium
5754 Ipuleti le-aluminium elinyathelayo linikeza inhlanganisela enokulinganisela kahle yokusebenza komshini, ukumelana nokugqwala, kanye nomklamo wendawo yokusebenza, ukwenza kube yimpahla ethandwayo yasolwandle, izimboni, kanye nezicelo zokuhamba. Izinzuzo zayo ezibalulekile zihlanganisa okulandelayo:
Njengengxube ye-Al-Mg, 5754 ikhombisa ukumelana okuqinile nokugqwala komkhathi, isifutho samanzi olwandle, nezimo ezisogwini ezinomswakama.
Ifilimu ye-aluminium oxide eyakha ngokwemvelo ivikela ingaphezulu emigodini kanye nokugqwala okuvamile, ukwelula kakhulu impilo yesevisi ezinhlelweni zasolwandle nezisogwini uma kuqhathaniswa ne-carbon steel.
Ngokushuba cishe 2.7 g/cm³ namandla aqinile aqala ukusuka 220 ku 290 I-MPa (Kuya ngentukuthelo), 5754 ipuleti lokunyathela le-aluminium linikeza ukusebenza okuthembekile kwesakhiwo kuyilapho lihlala lilula kakhulu kunensimbi.
Le nzuzo isiza ukunciphisa isisindo esijwayelekile sesakhiwo, ukwenza ngcono ukusebenza kahle kukaphethiloli namandla okulayisha emikhunjini nasezimotweni.
Ukunyathela okuphakanyisiwe noma iphethini ye-checkered (njengedayimane, 3-ibha, noma imiklamo ye-5-bar) ithuthukisa ukungqubuzana kwendawo kanye nokumelana nokushelela.
Lesi sici sibalulekile emigwaqweni yokuhamba ngezinyawo, amadekhi, izitebhisi, kanye namarampu, ikakhulukazi emanzi, amafutha, noma izindawo ezinethrafikhi ephezulu, ukunciphisa isidingo sezingubo ezengeziwe zokulwa nokushelela.
5754 ipuleti le-aluminium elinyathelayo ligcina i-ductility elihle futhi lingagotshwa, ukusika, isitembu, futhi yakhiwe ngezinto zokwakha ezijwayelekile.
Uma kuqhathaniswa nama-alloys aphezulu-magnesium njenge 5083, inikeza ukwakheka okulula ngenkathi igcina amandla anele ekusetshenzisweni okuningi kwesakhiwo kanye nesakhiwo esimaphakathi.
Imibhede Yamaloli Esetshenzisiwe 5754 I-Aluminium Plate
I-alloy ihambisana kakhulu nezindlela ezivamile zokushisela, kufaka phakathi i-MIG kanye ne-TIG yokushisela.
Amajoyinti ashiselwe abonisa ubuqotho obuhle bemishini kanye nokumelana nokugqwala lapho kusetshenziswa izinsimbi nezinqubo zokugcwalisa ezifanele., okuvumela ukwakhiwa okuphumelelayo nokufakwa endaweni.
Ngenxa yokumelana nokugqwala kwayo kanye nephethini yendawo ehlala isikhathi eside, 5754 ipuleti lokunyathela le-aluminium lidinga ukulungiswa okuncane phakathi nesikhathi sokuphila kwayo.
Lokhu kunciphisa imvamisa yokuhlola, izindleko zokumboza, nesikhathi sokuphumula, okuholela ezindlekweni eziphansi zomjikelezo wokuphila.
I-aluminium 100% Ukuphinda usebenzise kabusha ngaphandle kokulahleka kwezakhiwo. Ukugaywa kabusha kwe-aluminium kudla kufika 95% amandla amancane kunokukhiqizwa okuyisisekelo, ukwenza 5754 ipuleti le-aluminium elinyathela ngoshekhasi liwukukhetha okubophezelekile kwezemvelo kubunjiniyela besimanje namaphrojekthi wokwakha.
5754 ipuleti le-tread/checkered lisetshenziswa kakhulu noma kuphi lapho kuhlanganiswa khona ukusebenza kwe-anti-slip, ukumelana nokugqwala, weldability kanye nesisindo esincane iyadingeka.
Ngezansi ngibala izindawo zokufaka izicelo eziyinhloko, nikeza iziqondiso ezicacile ezisebenzayo (ukujiya okujwayelekile/ulaka, izinhlobo zephethini namanothi okufaka), futhi unikeze izibonelo ezimfushane ezisebenzayo ongazisebenzisa ekwakhiweni noma ekuthengeni.
Kungani kusetshenziswa: kuhle kakhulu ukumelana kwamanzi olwandle/ukuchaphaza, isisindo esincane kanye nokushisela okuhle kakhulu kwezakhiwo ezinkulu zomkhumbi, izitebhisi nezitezi ezingezona eziyisisekelo.
Ukujiya okujwayelekile: 2.0-6.0 mm (2-4 mm kumadekhi abahamba ngezinyawo; 4-6 mm ezimotweni ezithwala kanzima noma ezilula).
Ulaka olujwayelekile: H22 / H114 / H116 kuye ngokwakheka okudingekayo namandla.
Iphethini & boss ukuphakama: idayimane noma amabha ama-3; ukuphakama kwebhosi 0.8-1.6 mm.
5754 I-Aluminium Tread Checkered Plate yamaDekhi
Kungani kusetshenziswa: ukumelana nokugqwala kanye ne-topside mass ephansi kunciphisa izindleko zesakhiwo kanye nokufakwa kalula.
Ukujiya okujwayelekile: 3.0-6.0 mm, bunzima uma ukufinyelela kwemoto kuyadingeka.
Iphethini: 3-ibha noma ibha engu-5 ekhethwayo kumarempu ukuze ibambe iqonde.
Kungani kusetshenziswa: i-anti-slip surface, lula ukwenziwa, kanye nokumelana nemimoya yezimboni (amafutha, amakhemikhali athambile).
Ukujiya okujwayelekile: 2.0-4.0 mm izindlela zokuhamba zabasebenzi; 4.0-6.0 mm lapho ama-trolleys amancane noma amaloli e-pallet asebenza khona.
Ukuzila ukudla: ama-countersunk bolt anamapuleti asekelayo noma ama-rivets ayimpumputhe; sebenzisa ama-backing/saddles ngaphansi kwamashidi amancane ukuze uvimbele ukudonsa.
Kungani kusetshenziswa: ithuthukisa ukusebenza kahle komthwalo okhokhelwayo ngokunciphisa isisindo kuyilapho ihlinzeka ngezindawo eziqinile zokulwa nokushelela.
Ukujiya okujwayelekile: 3.0-6.0 mm (kuye ngomthwalo olindelekile: Isiminyaminya se-forklift → sebenzisa ipuleti elijiyile noma okunye).
Iphethini: idayimane noma amabha ama-3; cabangela izimbambo ezishiselwe ngaphansi kwepuleti ukuze ukhuphule umthamo womthwalo ngaphandle kokuqina okweqile.
Gqoka isu: faka imichilo yomhlatshelo eshintshwayo ehambisana namathrekhi amasondo.
Kungani kusetshenziswa: ukubukeka kwezimboni ezikhangayo, ukumelana nokushelela ezitebhisini zomphakathi namarempu, kulula ukuqeda (anodize/penda).
Ukujiya okujwayelekile: 1.5- 3.0 mm okokumboza kanye namarempu lapho imithwalo ingahamba ngezinyawo.
Pheza: ama-brushed noma ama-coated finishes e-aesthetics; ifilimu yokuzivikela ngesikhathi sokufakwa ukugwema imihuzuko.
Ithebula elingezansi liyaqhathanisa 5754 ngezinye izindlela ezisetshenziswa kakhulu.
| Impahla / Okubalulekile | 5754 | 5052 | 5083 | 3003 | Ingenabala 316 |
|---|---|---|---|---|---|
| Iklasi le-alloy | I-Al–Mg | I-Al–Mg | Al–Mg–Mn (osolwandle) | Al-mn | I-Austenitic SS |
| Isivuno esijwayelekile (I-MPa) | ~120–185 | ~110–170 | ~115–150 | ~80–110 | ~200–320 |
| I-UTS (I-MPa) | ~220–290 | ~200–300 | ~275–350 | ~150–190 | ~520–700 |
| Ukugqwala kwamanzi olwandle | Kuhle kakhulu | Kuhle kakhulu | Kuhle kakhulu | Kuhle | Kuhle kakhulu |
| Ukuhleleka | Kuhle | Kuhle kakhulu | Kuhle - kuhle | Kuhle kakhulu | Kuphakathi |
| Ukushisela | Kuhle kakhulu | Kuhle kakhulu | Kuhle kakhulu | Kuhle | Kuhle |
| Gqoka / ukuphakamayo | Kuphakathi | Kuphakathi | Kuhle | Kuphakathi | Kuhle kakhulu |
| Izindleko ezihlobene | Maphakathi | Maphakathi | Phezulu | Phansi | Phezulu |
| Ukuminyana (g/cm³) | ~2.66–2.70 | ~2.70 | ~2.66–2.70 | ~2.70 | ~7.9 |
Ukuhunyushwa:
5083 ikhethwa endaweni yokuqala kanye nokuchayeka kakhulu emanzini olwandle;
5052 inikeza ukwakheka okungcono kancane kuno 5754;
3003 ishibhile futhi kwakheka kakhudlwana kodwa amandla aphansi; insimbi engagqwali inikeza ukumelana nokubola kodwa iyasinda futhi iyabiza.
5754 ihlezi endaweni ephakathi nendawo yamapuleti okunyathela angaphezulu.
Uma ucacisa 5754 unyathela ipuleti, zidinga imibhalo ecacile kanye nokuhambisana namazinga:
Huasheng Aluminium - umkhiqizi okwazi ukuletha izinga eliphezulu 5754 ipuleti lokunyathela ngokuvamile linikeza:
Uhlu lokuhlola lomthengi: lapho uhlola abahlinzeki abafana ne-Huasheng Aluminium, cela izincazelo zenqubo (ukuncibilika kokuhlunga, embossing roll tolerances), Amasampula e-MTC, izibalo zokukhubazeka okungaphezulu kanye nezinkomba ezivela kumaphrojekthi wasolwandle/wezokuthutha.
5754 ipuleti elicwengekileyo le-aluminium lingaphezulu kakhulu kweshidi elinephethini elilula. Kuyimpahla yobunjiniyela enamandla kakhulu enikezela nge “akukho-kuvumelana” isisombululo senhlobonhlobo emaphakathi- kuzinhlelo zokusebenza ezinzima.
Ivala ngempumelelo igebe phakathi kwama-alloys wenjongo evamile kanye ne-ultra-high-strength, ukuhlinzeka ngenhlanganisela yamandla eyingqayizivele futhi ekhangayo kakhulu, ukumelana nokugqwala kwasolwandle, kanye nokwenza kahle kakhulu.
Okwabaklami nonjiniyela abafuna okuhlala isikhathi eside, iphephile, kanye nezinto ezingasindi ezingasebenza ngokuthembekile ngaphansi kwengcindezi, 5754 i-tread plate iwukukhetha okukhaliphile namasu.
Q1 - Ingabe 5754 kufanelekile umkhumbi we-hull Plating?
A: Cha - i-hull plating kanye namapuleti esakhiwo ayisisekelo ngokuvamile adinga ama-alloys asolwandle anamandla aphezulu njenge 5083/5086. 5754 inhle kakhulu kuma-topsides, superstructures kanye namadekhi angewona ayisisekelo.
Q2 - Yibuphi ubude bephethini okufanele ngikhethe ukuhlobisa?
A: Ibanga lobude bephethini evamile 0.8-1.8 mm. Khetha ubude obuphansi lapho kubalulekile ukuvala/ukuhlanzeka futhi ube phezulu ukuze ubambe kakhulu ngaphansi kwezimo ezinamafutha/ezinzima. Qinisekisa ngobukhulu bephethini yomhlinzeki.
Q3 - Can 5754 ipuleti lokunyathela lihlanganiswe nensimbi engagqwali?
A: Yebo, kodwa hlukanisa nge-galvanically (ama-washer / ama-seal avikelayo) futhi aklame amalunga ukuze agweme ukugqwala kwemifantu. Sebenzisa izinsimbi zokugcwalisa ezihambisanayo nezinqubo zokushisela ezifanelekile.
Q4 - Ngicacisa kanjani 5754 cindezela ipuleti ku-PO?
A: Faka ingxubevange & ukuthukuthela (isib., EN AW-5754 H22), ukujiya & ukubekezelelana, uhlobo lwephethini nobude bomphathi, ububanzi beshidi/ubude, i-MTC edingekayo (IN 10204 3.1), qeda, kanye nanoma yiziphi izidingo zesigaba somphakathi.
I-Q5 - Isondlo senzani 5754 isidingo sokunyathela ipuleti?
A: Ukuhlanza njalo (ekhipha usawoti, gxibisa, amafutha), ukuhlolwa kwe-fasteners kanye nama-anode omhlatshelo (uma isetshenziswa), kanye nokunameka kabusha lapho ukuguguleka kunciphisa ukujiya noma izici zokuzivikela.
1. Isingeniso 3003 aluminium……
1. Isingeniso Njengemboni……
Isingeniso Emhlabeni we......
8011 H18 blister aluminium fo ……
Isingeniso ku 1050 I-Epoxy C……
1. Isingeniso 8011 Embosse……
I-Henan Huasheng Aluminium Co., Ltd (HHALU ngamafuphi), isungulwe ku 2001, itholakala Huiguo Town, inhloko-dolobha edumile ye-Aluminium yesiFundazwe saseHenan, Ingumkhiqizi oqeqeshiwe futhi uhlanganyela ocwaningweni, ukuthuthukiswa, ukukhiqizwa, Ukuthengisa kanye nensizakalo ye i-aluminium ipuleti leshidi, ikhoyili ye-aluminium, i-aluminium foil, i-aluminium strip kanye nesiyingi se-aluminium.
Ngaphezu kwalokho, I-HHALU iphinde ithengise ipuleti le-aluminium yokwakha kanye nemikhumbi, ipuleti lesibuko se-aluminium, kanye ne-automotive aluminium alloy plate.
No.53, Umgwaqo we-Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Wonke Amalungelo Agodliwe.
