| Waiwai | Waiwai |
| Kūlana | ASTM B209, IN 573-3, IN 485-2, AMS QQ-A-250/11 |
| mānoanoa | 0.2mm - 500mm |
| Laulā | A hiki i 2650mm |
| Ka lōʻihi | Hoʻopilikino |
| Hoʻopau ʻili | Mill, pulumiia, anodized, i uhi ʻia i ka pauda |
5754 alumini hehi pāpaʻa he papa alumini hoʻohālike i hana ʻia mai ka 5754 huila a hoʻolako ʻia i nā ʻano ana a me nā ʻano hehi (daimana/lozenge, 3-pā, 5-pā, poepoe puni).
Hoʻolālā nā ʻenekinia i ka huahana e hoʻopuka i ka pale pale, ʻoʻoleʻa kūloko, a me ka ʻike paʻa. Hoʻohana pinepine nā mea hoʻohana iā ia i nā papa moku a me nā waʻa, E nānā i nā'ōpala, kaʻa papahele, nā paepae komo, nā ala hele ʻoihana, a me nā hana hoʻolālā e koi ai i ka pale ʻana i ka corrosion, weldability, a me ka hana anti-slip.
Hāʻawi kēia ʻatikala i nā mea hoʻolālā a me nā hui kūʻai, ʻike pili ʻenehana: haku mele a me ka hana mechanical, hana ʻino, hana ʻana a me nā ʻano hoʻohālike o ka ʻili, nā pōmaikaʻi a me nā palena, nā noi, a pehea 5754 hoʻohālikelike ka papa hehi me nā mea ʻē aʻe.
5754 Pa'a Aluminum Tread Checkered
ʻO ka 5754 alumini alumini he aluminika-magnesium (5ʻO XXXʻohana). Nā pae haku mele maʻamau (kaumaha %) hoʻohana ʻia no ke koho ʻana a me nā kikoʻī i hōʻike ʻia ma lalo nei.
Pono i nā palapala hōʻoia Mill (Mtcs) no ka ʻae ʻana ma kēlā me kēia ʻāpana.
| ʻElemu | Laulā maʻamau (wt%) |
|---|---|
| Al (kaulike) | Kaulike |
| ʻO Mg (magnesium) | 2.6 – 3.6 |
| ʻO Mn (manganese) | 0.3 – 0.6 |
| A (silika) | ≤ 0.40 |
| ʻO Fe (hao) | ≤ 0.40 |
| Cr (chromium) | ≤ 0.30 |
| Cu (keleawe) | ≤ 0.10 |
| ʻO Zn (zinc) | ≤ 0.20 |
| O, nā mea ʻē aʻe | Piu / hoomaluia (≤ 0.15 kēlā me kēia) |
Nā memo: ʻO ka magnesium ka mea hoʻoikaika nui a kōkua pū i ka pale ʻana i ke kai. 5754 ʻoi aku ka nui o Mg ma mua o 3003/1100 moʻo a me ka emi iki ma mua o ka ikaika kiʻekiʻe moana alloys e like me 5083.
Pili nui nā waiwai mīkini i ka huhū a me ka mānoanoa. Hāʻawi ka papa ma lalo nā pae ʻenehana hōʻike no ka wela maʻamau i hoʻohana ʻia i ka papa hehi (H22, Hoʻohana ʻia nā ʻano like ʻole H111/H116 ma muli o ka hana wili a me ka noi):
| Waiwai | Laulā maʻamau (luna iho) |
|---|---|
| 0.2% hōʻoia / Hāʻawi (MPa) | ~120 – 185 |
| ʻO ka ikaika hope loa (UTS, MPa) | ~220 – 290 |
| ʻO ka lōʻihi (%) | ~7 – 15 |
| ʻO Brinell paʻakikī (HB) | ~55 – 75 |
| ʻO ka modulus ʻōpio (E) | ≈ 69 GPa |
| ʻO ka mānoanoa | ≈ 2.66 – 2.70 g/cm³ |
ʻŌlelo aʻo hoʻolālā: e hoʻohana i ka minima i hōʻoia ʻia e ka mea hoʻolako no ka hoʻolālā ikaika a hōʻoia i ka huhū (H22, H114, H116 etc.) ma ke kaha kiʻi ʻana. No ka luhi-ko'iko'i a ko'iko'i paha nā papa hana ho'olālā e makemake i nā māka 5xxx ikaika ki'eki'e (e.g., 5083).
Ke hōʻoia nei i ka ho'āʻoʻana o 5754 Pepa Aluminum
Huasheng Package 5754 Pepa Aluminum
5754 Hāʻawi ka papa ʻaina alumini i kahi hui kaulike o ka hana mechanical, pale ʻino, a me ka hoʻolālā ʻilikai hana, lilo ia i mea makemake no ke kai, ʻoihana ʻoihana, a me nā palapala hoʻokele. ʻO kāna mau pōmaikaʻi nui e pili ana i kēia:
E like me ka Al-Mg huila, 5754 hōʻike i ke kūpaʻa ikaika i ka ʻino o ka lewa, ehu wai kai, a me nā kūlana kahakai haʻahaʻa.
Mālama ke kiʻi ʻoniʻoni alumini oxide i ka ʻili mai ka lua a me ka ʻino maʻamau, hoʻonui nui ʻia ke ola lawelawe ma nā noi kai a me nā ʻāina i hoʻohālikelike ʻia me ke kila kalapona.
Me ka mānoanoa o kahi 2.7 g/cm³ a me ka ikaika tensile maʻamau mai 220 i 290 MPa (Ke hilinaʻi nei i ka huhū), 5754 Hāʻawi ka papa hehi alumini i ka hana hoʻolālā hilinaʻi ʻoiai ʻoi aku ka māmā ma mua o ke kila.
ʻO kēia pōmaikaʻi ke kōkua i ka hoʻemi ʻana i ke kaumaha o ke kino holoʻokoʻa, ka hoʻomaikaʻi ʻana i ka pono o ka wahie a me ka hiki ke uku i nā moku a me nā kaʻa.
ʻO ke ʻano hehi i hoʻokiʻekiʻe ʻia a i ʻole ke ʻano kikoʻī (e like me ke daimana, 3-pā, a i ʻole nā hoʻolālā 5-bar) hoʻonui i ka friction o ka ʻili a me ka pale paheʻe.
He mea koʻikoʻi kēia hiʻohiʻona no nā ala hele wāwae, nā papa, alapiʻi, a me nā ramps, oi aku ma ka pulu, aila, a i ʻole nā kaiapuni kiʻekiʻe, e hōʻemi ana i ka pono o nā pale anti-slip hou.
5754 ʻO ka pāpaʻi kāʻei alumini e mālama i ka ductility maikaʻi a hiki ke piʻo, ʻoki, i hoailonaia, a hana ʻia me nā mea hana maʻamau.
Hoʻohālikelike ʻia me nā mea hao kiʻekiʻe-magnesium e like me 5083, Hāʻawi ia i ka maʻalahi o ka hoʻokumu ʻana i ka wā e mālama mau ana i ka ikaika no ka nui o ka hoʻohana ʻana a me ka semi-structural.
Hoʻohana ʻia nā moena kaʻa 5754 Papa Aluminum
He kūpono loa ka alloy me nā ʻano wili maʻamau, me ka wiliwili MIG a me TIG.
Hōʻike nā hui welded maikaʻi i ka pono mechanical a me ka pale ʻana i ka corrosion ke hoʻohana ʻia nā metala hoʻopiha kūpono a me nā kaʻina hana, hiki i ka hana pono ʻana a me ka hoʻokomo ʻana ma ka pūnaewele.
Mahalo i kona pale ʻana i ka corrosion a me ke ʻano o ka ʻili paʻa, 5754 Pono ka mālama liʻiliʻi o ka pā alumini i kona wā e ola ana.
Hoʻemi kēia i ka pinepine o ka nānā ʻana, koina uhi, a me ka manawa hoʻomaha, ke alakaʻi nei i ka hoʻohaʻahaʻa ʻana i nā kumukūʻai holoʻokoʻa holoʻokoʻa.
ʻO ke alumini 100% recyclable me ka nalowale o nā waiwai. Hoʻopau ka alumini recycling a hiki i ka 95% ka liʻiliʻi o ka ikaika ma mua o ka hana mua, hana ana 5754 ʻO ka pāpaʻi kāhili alumini he koho kūpono i ke kaiapuni no nā hana ʻenekinia hou a me nā hana kūkulu.
5754 hoʻohana nui ʻia ka papa hehi/checkered ma nā wahi a pau i hui pū ʻia hana kūʻē i ka paheʻe, pale ʻino, weldability a me ke kaumaha haʻahaʻa koiʻia.
Ma lalo wau e papa inoa i nā wahi noi nui, hāʻawi i nā kuhikuhi kikoʻī kūpono (mānoanoa maʻamau, ʻano hoʻohālike a me nā memo hoʻonohonoho), a hāʻawi i nā hiʻohiʻona hana pōkole hiki iā ʻoe ke hoʻohana i ka hoʻolālā a i ʻole ke kūʻai ʻana.
No ke aha i hoʻohana ʻia ai: maikaʻi loa i ka wai kai/ka pāpaʻi, māmā kaumaha a maikaʻi loa weldability no ka moku superstructures, nā alapiʻi a me nā papa kumu ʻole.
Mānoanoa maʻamau: 2.0–6.0 mm (2–4 mm no nā papa hele wāwae; 4–6 mm no ka hele wāwae kaumaha a i ʻole nā kaʻa lawelawe māmā).
ʻO ka huhū maʻamau: H22 / H114 / H116 e pili ana i ka formability a me ka ikaika e pono ai.
ʻano hoʻohālike & luna kiʻekiʻe: daimana a i ʻole 3-bar; luna kiʻekiʻe 0.8-1.6 mm.
5754 Pa'a Aluminum Tread Checkered no nā Deck
No ke aha i hoʻohana ʻia ai: ʻO ka pale ʻana i ka corrosion a me ka ʻaoʻao haʻahaʻa o luna e hoʻemi i nā kumukūʻai hale a maʻalahi ke hoʻokomo ʻana.
Mānoanoa maʻamau: 3.0–6.0 mm, ʻoi aku ke kaumaha inā pono ke komo kaʻa.
ʻano hoʻohālike: 3-bar a i ʻole 5-bar i makemake ʻia ma nā ramp no ka hoʻopaʻa ʻana.
No ke aha i hoʻohana ʻia ai: ʻili paheʻe, maʻalahi o ka hana ʻana, a me ke kū'ē i nā lewa ʻoihana (pono, nā kemika māmā).
Mānoanoa maʻamau: 2.0–4.0 mm no na ala hele kanaka; 4.0–6.0 mm kahi e hana ai nā kaʻa kaʻa māmā a i ʻole nā kaʻa pallet.
Hoʻopaʻa: nā wili countersunk me nā papa hope a i ʻole nā rivet makapō; e hoʻohana i ke kua / noho ma lalo o nā ʻāpana lahilahi e pale i ka huki ʻana.
No ke aha i hoʻohana ʻia ai: hoʻomaikaʻi i ka pono o ka uku ma o ka hoʻemi ʻana i ke kaumaha ʻoiai e hāʻawi ana i nā ʻili anti-slip lōʻihi.
Mānoanoa maʻamau: 3.0–6.0 mm (ma muli o ka ukana i manaʻo ʻia: kaʻa forklift kaumaha → hoʻohana i ka pā mānoanoa a i ʻole nā mea ʻē aʻe).
ʻano hoʻohālike: daimana a i ʻole 3-bar; e noʻonoʻo i nā iwi ʻaoʻao i wili ʻia ma lalo o ka pā e hoʻonui i ka hiki ke hoʻouka me ka ʻole o ka mānoanoa.
Hoʻohana i ka hoʻolālā: kūpono i nā kāʻei lole mōhai hiki ke hoʻololi ʻia ma nā ala huila.
No ke aha i hoʻohana ʻia ai: hiʻohiʻona ʻenehana hoihoi, pale paheʻe no nā alapiʻi lehulehu a me nā ramps, maʻalahi e hoʻopau (anodize/pena).
Mānoanoa maʻamau: 1.5–3.0 mm no ka uhi ʻana a me nā ramp kahi e hele wāwae nui ai nā ukana.
Hoʻopau: palaki a uhi ʻia paha no ka nani; kiʻiʻoniʻoni pale i ka wā o ka hoʻokomo ʻana e pale i nā ʻōpala.
Hoʻohālikelike ka papa ma lalo 5754 me nā mea hoʻohana maʻamau.
| Waiwai / Mea waiwai | 5754 | 5052 | 5083 | 3003 | Kūleʻa 316 |
|---|---|---|---|---|---|
| Papa huila | Al–Mg | Al–Mg | Al–Mg–Mn (kai moana) | Al-mn | Austenitic SS |
| Hua maʻamau (MPa) | ~120–185 | ~110–170 | ~115–150 | ~80–110 | ~200–320 |
| UTS (MPa) | ~220–290 | ~200–300 | ~275–350 | ~150–190 | ~520–700 |
| ʻAha wai kai | Maikaʻi loa | Maikaʻi loa | Maikaʻi | Maikaʻi loa | Maikaʻi |
| ʻAno hiki | Maikaʻi loa | Maikaʻi loa | Pono–maikaʻi | Maikaʻi | Kaumaha |
| Weldability | Maikaʻi | Maikaʻi | Maikaʻi | Maikaʻi loa | Maikaʻi loa |
| ʻaʻahu / hoʻopihaʻia | Kaumaha | Kaumaha | Maikaʻi loa | Kaumaha | Maikaʻi loa |
| Koina pili | Kauwaena | Kauwaena | Kiʻekiʻe | Haʻahaʻa | Kiʻekiʻe |
| ʻO ka mānoanoa (g/cm³) | ~2.66–2.70 | ~2.70 | ~2.66–2.70 | ~2.70 | ~7.9 |
Ka wehewehe:
5083 ʻoi aku ka maikaʻi no ka hoʻokumu ʻana i ka wai kai kiʻekiʻe;
5052 hāʻawi iki i ka formability maikaʻi ma mua o 5754;
3003 ʻoi aku ka liʻiliʻi a ʻoi aku ka ikaika akā haʻahaʻa; Hāʻawi ke kila kuhili ʻole i ka ʻaʻahu a me ka pale ʻana i ka corrosion akā he kaumaha a he kumu kūʻai.
5754 e noho ana ma kahi kaulike waena no nā papa hehi luna.
I ka hoakaka ana 5754 Pā i ka pā, koi i nā palapala a me ka hoʻokō ʻana i nā kūlana:
Huasheng Aluminum - kahi mea hana hiki ke hoʻopuka i ke kūlana kiʻekiʻe 5754 Hāʻawi maʻamau ka papa hehi:
Ka papa inoa o ka mea kūʻai: i ka loiloi ʻana i nā mea hoʻolako e like me Huasheng Aluminum, e noi i nā wehewehe kaʻina hana (hoʻoheheʻe kānana, embossing roll tolerances), Nā laʻana MTC, nā helu helu kīnā ʻāina a me nā kuhikuhi mai nā papahana kai/kaʻa.
5754 alumini hehi pāpaʻa ʻoi aku ka nui ma mua o kahi pepa maʻalahi. He mea 'enekinia mākaukau loa ia e hāʻawi a “ʻaʻohe kuʻikahi” hoʻonā no kahi ākea ākea- i nā noi kaumaha.
Hoʻopili maikaʻi ʻo ia i ka ʻokoʻa ma waena o nā mea hoʻoheheʻe nui a me ka ikaika ultra-kiʻekiʻe, hāʻawi i kahi hui kūikawā a nani loa o ka ikaika, pale ʻana i ka corrosion grade moana, a maikaʻi ka fabricability.
No nā mea hoʻolālā a me nā ʻenekini e ʻimi nei i kahi lōʻihi, palekana, a me nā mea māmā e hiki ke hana me ka hilinaʻi ma lalo o ke kaomi, 5754 ʻO ka papa hehi ke koho naʻauao a hoʻolālā.
Q1 — He 5754 kūpono no ka uhi ʻana o ka moku?
A: ʻAʻole - ʻo ka uhi ʻana o ka hull a me nā papa hana kumu maʻamau e koi aku i nā huila kai ʻoi aku ka ikaika e like me 5083/5086. 5754 maikaʻi loa no nā ʻaoʻao o luna, nā hale kiʻekiʻe a me nā papa kumu ʻole.
Q2 — He aha ke kiʻekiʻe kiʻekiʻe aʻu e koho ai no ka decking?
A: Laulā kiʻekiʻe maʻamau 0.8–1.8 mm. E koho i nā kiʻekiʻe haʻahaʻa kahi e pono ai ke sila a me ka hoʻomaʻemaʻe ʻana a ʻoi aku ka kiʻekiʻe no ka paʻa kiʻekiʻe ma lalo o nā kūlana ʻaila. E hōʻoia me nā ana kumu hoʻolako.
Q3 — Hiki 5754 wili ʻia ka pā hehi i ke kila kila?
A: ʻAe, aka hoʻokaʻawale i ke kaula hao (nā mea holoi holoi / sila) a me ka hoʻolālā ʻana i nā hono e pale aku i ka ʻinoʻino. E hoʻohana i nā metala hoʻopiha kūpono a me nā kaʻina hana wili kūpono.
Q4 — Pehea wau e wehewehe ai 5754 hehi papa ma kahi PO?
A: E hoʻohui i nā mea hao & huhū (e.g., EN AW-5754 H22), mānoanoa & hoʻomanawanui, ʻano kumu a me ke kiʻekiʻe o ka luna, laula pepa/lōʻihi, pono MTC (IN 10204 3.1), hoʻopau, a me nā koi a ka hui.
Q5 - He aha ka mālama ʻana 5754 pono papa hehi?
A: Hoʻomaʻemaʻe mau (ka wehe ʻana i ka paʻakai, git, pono), ka nānā ʻana i nā mea hoʻopaʻa a me nā anodes mōhai (inā hoʻohana ʻia), a me ka hoʻopaʻa hou ʻana ma kahi e hoʻemi ʻia ai ka mānoanoa a i ʻole nā mea pale.
1. Hoʻolauna 3003 alumini……
1. Hoʻolauna E like me ka ʻoihana……
Hoʻolauna I ka honua o……
8011 H18 blister alumini no……
Hoʻolauna i 1050 Epoxy C……
1. Hoʻolauna 8011 Embosse……
Henan Huasheng Aluminum Co., Ltd (HHALU no ka pōkole), kukuluia ma 2001, aia ma ke kaona o Huiguo, ke kapikala Aluminum kaulana o Henan Province, He mea hana ʻoihana a komo i ka noiʻi, hooulu ana, hana ʻana, kūʻai aku a me ka lawelawe o aluminika papa lau, alumini coil, alumini pepa, ʻāpana alumini a me ka pōʻai alumini.
Kahi mea hou aʻe, Ke kūʻai aku nei ʻo HHALU i ka pā alumini no ke kūkulu ʻana a me nā moku, pā aniani aluminika, a me ka pā alumini alumini kaʻa.
No.53, Alanui Dongming, Zhengzhou, Henan, Kina
Kuleana kope © Huasheng Aluminum 2025. Ua mālama ʻia nā kuleana āpau.
