| Spésifikasi | Rentang atanapi Pilihan |
| Kandelna | 0.2mm nepi ka 250 mm |
| Lebar | 500 mm nuju 2500 mm |
| Panjangna | 1000 mm nuju 12000 mm |
| Watekna | O, H111, H32, jeung sajabana (H12 nepi ka H38) |
| Perlakuan permukaan | Ngagiling, ngagosok, nyikat, anodizing, jsb. |
Aloi aluminium dipikanyaho pikeun versatility sareng rasio kakuatan-ka-beurat, ngajadikeun aranjeunna pilihan populér di sagala rupa industri. Diantara alloy ieu, éta 5454 Lempeng Lambaran Aluminium nangtung pikeun kakuatan anu luhur, lalawanan korosi alus teuing, sarta formability unggul. Artikel ieu delves kana specifics tina 5454 Lempeng Lambaran Aluminium, kaunggulan na, spésifikasi, sipat mékanis, aplikasi, sareng seueur deui.
The 5454 Lempeng Lambaran Aluminium mangrupikeun alloy aluminium-magnésium kakuatan tinggi anu seueur dianggo dina industri pembuatan kapal sareng transportasi.. Éta kasohor pikeun résistansi korosi anu saé, utamana dina cai laut jeung lingkungan corrosive lianna, sahingga idéal pikeun aplikasi laut.
Komposisi kimia tina 5454 plat lambar aluminium kritis kana ciri kinerja na. Ieu ngarecahna lengkep:
| Unsur komponén | Metric Percentage Range |
|---|---|
| alumunium (Al) | 94.4 – 97.1 % |
| Kromium (Cr) | 0.05 – 0.20 % |
| Tambaga (Cu) | ≤ 0.10 % |
| Beusi (Fe) | ≤ 0.40 % |
| Magnésium (Mg) | 2.4 – 3.0 % |
| Mangan (Bungbulang) | 0.50 – 1.0 % |
| Lain, masing-masing | ≤ 0.05 % |
| Lain, total | ≤ 0.15 % |
| Silikon (Jeung) | ≤ 0.25 % |
| titanium (Tina) | ≤ 0.20 % |
| Séng (Zn) | ≤ 0.25 % |
The 5454 pelat lambar aluminium nawarkeun rupa-rupa mangpaat anu ngajadikeun eta pilihan pikaresep keur loba aplikasi:
The 5454 plat lambar aluminium nyaéta sadia dina rupa thicknesses, lebar, jeung panjangna, sarta bisa disadiakeun dina tempers béda:
| Spésifikasi | Rentang atanapi Pilihan |
| Kandelna | 0.2mm nepi ka 250 mm |
| Lebar | 500 mm nuju 2500 mm |
| Panjangna | 1000 mm nuju 12000 mm |
| Watekna | O, H111, H32, jeung sajabana (H12 nepi ka H38) |
| Perlakuan permukaan | Ngagiling, ngagosok, nyikat, anodizing, jsb. |
Ngartos sipat mékanis tina 5454 plat lambar aluminium penting pisan pikeun nangtukeun suitability na pikeun sagala rupa aplikasi, since the mechanical properties of 5454 alloys of different temperatures vary greatly, taking the O state as an example, the following table shows the mechanical properties of 5454-O:
| Milik mékanis | Metric Value | Conditions/Comments |
|---|---|---|
| Teu karasa, Brinell | 62 | AA; has; 500 g load; 10 bal mm |
| Teu karasa, Knoop | 85 | Converted from Brinell Hardness Value |
| Teu karasa, Vickers | 72 | Converted from Brinell Hardness Value |
| Kakuatan regangan, Pamungkas | 248 MPa | AA; has |
| 41.0 MPa | @ 371 °C / 700 °F | |
| 75.0 MPa | @ 316 °C / 601 °F | |
| 115 MPa | @ 260 °C / 500 °F | |
| 150 MPa | @ 204 °C / 399 °F | |
| 200 MPa | @ 149 °C / 300 °F | |
| 250 MPa | @ -28.0 °C / -18.4 °F | |
| 250 MPa | @ 24.0 °C / 75.2 °F | |
| 250 MPa | @ 100 °C / 212 °F | |
| 255 MPa | @ -80.0 °C / -112 °F | |
| 370 MPa | @ -196 °C / -321 °F | |
| Kakuatan regangan, Hasil | 117 MPa | AA; has |
| 29.0 MPa | @ 371 °C / 700 °F | |
| 50.0 MPa | @ 316 °C / 601 °F | |
| 75.0 MPa | @ 260 °C / 500 °F | |
| 105 MPa | @ 204 °C / 399 °F | |
| 110 MPa | @ 149 °C / 300 °F | |
| 115 MPa | @ -80.0 °C / -112 °F | |
| 115 MPa | @ -28.0 °C / -18.4 °F | |
| 115 MPa | @ 24.0 °C / 75.2 °F | |
| 115 MPa | @ 100 °C / 212 °F | |
| 130 MPa | @ -196 °C / -321 °F | |
| Elongation di Break | 25 % | @ 24.0 °C / 75.2 °F |
| 27 % | @ -28.0 °C / -18.4 °F | |
| 30 % | @ -80.0 °C / -112 °F | |
| 31 % | @ 100 °C / 212 °F | |
| 39 % | @ -196 °C / -321 °F | |
| 50 % | @ 149 °C / 300 °F | |
| 60 % | @ 204 °C / 399 °F | |
| 80 % | @ 260 °C / 500 °F | |
| 110 % | @ 316 °C / 601 °F | |
| 130 % | @ 371 °C / 700 °F | |
| 22 % | @ Thickness 1.59 mm / 0.0625 di | |
| Modulus élastisitas | 70.3 GPa | AA; has; Rata-rata tegangan sareng komprési. Compression modulus is about 2% greater than tensile modulus. |
| Notched Tensile Strength | 221 MPa | 2.5 cm width x 0.16 cm thick side-notched specimen, Kt = 17. |
| Ultimate Bearing Strength | 427 MPa | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 165 MPa | Edge distance/pin diameter = 2.0 |
| Babandingan Pisces | 0.33 | Estimated from trends in similar Al alloys. |
| Kakuatan kacapean | 120 MPa | @ 5.00e+8 cycles; unnotched R. R. Moore rotating beam |
| Modulus geser | 26.0 GPa | Estimated from similar Al alloys. |
| Kakuatan geser | 159 MPa | AA; has |
This table provides a comprehensive overview of the mechanical properties of the 5454 alloy, including hardness, kakuatan regangan, elongation, modulus of elasticity, sareng seueur deui, under various conditions and temperatures. The “Conditions/Comments” column provides additional details about the specific test parameters or the nature of the property measurement.
The 5454 plat lambar aluminium manggih pamakéan dina Asép Sunandar Sunarya-rupa aplikasi alatan kombinasi unik miboga sipat:
The 5454-H32 plat lambar aluminium dipaké pikeun bak insulasi jeung mobil tank digosok, nawarkeun adaptability kana lingkungan corrosive:
| Harta | Nilai |
| Kakuatan regangan | 276 MPa |
| Kakuatan ngahasilkeun | 207 MPa |
| Modulus élastisitas | 70.3 GPa |
| Elongation di Break | 18%
@Temperature 24.0 °C |
| Teu karasa | 73 Brinell |
The 5454 H111 plat lambar aluminium anu panas-diperlakukeun pikeun kakuatan luhur sarta ductility handap, cocog pikeun struktur laut sareng kapal tekanan:
| Harta | Nilai |
| Kakuatan regangan | 262 MPa |
| Kakuatan ngahasilkeun | 179 MPa |
| Modulus élastisitas | 70.3 GPa |
| Elongation di Break | 14%
@Katebalan 1.59 mm |
| Teu karasa | 70 Brinell |
The 5454 O plat lambar aluminium, dina kaayaan annealed, nawarkeun ductility tinggi na formability alus:
| Harta | Nilai |
| Kakuatan regangan | 165 MPa |
| Kakuatan ngahasilkeun | 65 MPa |
| Modulus élastisitas | 70 GPa |
| Elongation di Break | 25% |
| Teu karasa | 62 Brinell |
The 5454 Aluminium diakuan ku sababaraha standar, nu bisa mibanda saeutik béda dina prosés manufaktur atanapi tolerances:
Penting pikeun konsultasi standar khusus anu dipikabutuh pikeun aplikasi anjeun pikeun mastikeun bahanna nyumponan sarat anu diperyogikeun.
Pikeun inquiries salajengna, spésifikasi lengkep, atawa pikeun nempatkeun pesenan, kontak Huasheng Aluminium, Anjeun dipercaya '5454 Aluminium Lambaran Plate’ pabrik jeung grosir. Tim profésional kami siap ngabantosan anjeun sareng sadaya kabutuhan aluminium anjeun.
Bubuka 1060 Aluminium……
Bubuka: Di Huasheng Al…
Bubuka Paduan aluminium……
Bubuka 1070 Aluminium……
bubuka pikeun 3004 Aluminium……
Bubuka Wilujeng sumping di Huas……
Henan Huasheng Aluminium Co., Ltd (HHALU pondokna), ngadeg di 2001, perenahna di Kota Huiguo, ibukota Aluminium kawentar Propinsi Henan, Ieu produsén profésional sarta kalibet dina panalungtikan, pangwangunan, produksi, jualan na jasa tina plat lambar aluminium, coil aluminium, aluminium foil, strip aluminium sarta bunderan aluminium.
Salaku tambahan, HHALU ogé ngajual plat aluminium pikeun konstruksi jeung kapal, plat eunteung aluminium, jeung plat alloy aluminium otomotif.
No.53, Jalan Dongming, Zhengzhou, Henan, Cina
Copyright © Huasheng Aluminium 2023. Sadaya hak disimpen.
