| Tlhaloso | Range kapa Dikgetho |
| Botenya | 0.2ho tloha ho limilimithara ho isa ho 250 mm |
| Bophara | 500 mm ho 2500 mm |
| Bolelele | 1000 mm ho 12000 mm |
| Khalefo | O, H111, H32, le ba bang (H12 ho ea ho H38) |
| Phekolo ea Bokaholimo | Ho sila, ho bentsha, ho hlatsoa, anodizing, etc. |
Lisebelisoa tsa aluminium li tsejoa ka ho feto-fetoha ha tsona le karo-karolelano ea matla ho boima ba 'mele, ho ba etsa khetho e tsebahalang ho pholletsa le liindasteri tse fapaneng. Har'a li-alloys tsena, the 5454 Aluminium Sheet Plate e hlahella ka matla a eona a holimo, ho hanyetsa ha kutu, le sebopeho se phahameng. Sengoliloeng sena se sheba lintlha tse tobileng tsa 5454 Aluminium Sheet Plate, melemo ea eona, litlhaloso, thepa ea mochini, lits'ebetso, le ho feta.
The 5454 Aluminium Sheet Plate ke motsoako oa aluminium-magnesium o matla haholo o sebelisoang haholo indastering ea kaho ea likepe le ea lipalangoang.. E tsebahala haholo ka ho hanyetsa ho bola ha eona, haholo-holo metsing a leoatle le libakeng tse ling tse senyang, e etsa hore e be e loketseng bakeng sa lits'ebetso tsa metsing.
Motsoako oa lik'hemik'hale oa 5454 poleiti ea aluminium e bohlokoa bakeng sa litšobotsi tsa eona tsa ts'ebetso. Mona ke tlhaloso e qaqileng:
| Karolo ea Karolo | Metric Percentage Range |
|---|---|
| Aluminium (Al) | 94.4 – 97.1 % |
| Chromium (Kr) | 0.05 – 0.20 % |
| Koporo (Cu) | ≤ 0.10 % |
| Tšepe (Fe) | ≤ 0.40 % |
| Magnesium (Mg) | 2.4 – 3.0 % |
| Manganese (Mong) | 0.50 – 1.0 % |
| Tse ding, enngwe le enngwe | ≤ 0.05 % |
| Tse ding, kakaretso | ≤ 0.15 % |
| Silicone (Le) | ≤ 0.25 % |
| Titanium (Ea) | ≤ 0.20 % |
| Zinki (Zn) | ≤ 0.25 % |
The 5454 Letlapa la aluminium le fana ka melemo e mengata e etsang hore e be khetho e ratoang bakeng sa lits'ebetso tse ngata:
The 5454 poleiti ea aluminium e fumaneha ka mefuta e fapaneng, bophara, le bolelele, 'me e ka fanoa ka mekhoa e fapaneng:
| Tlhaloso | Range kapa Dikgetho |
| Botenya | 0.2ho tloha ho limilimithara ho isa ho 250 mm |
| Bophara | 500 mm ho 2500 mm |
| Bolelele | 1000 mm ho 12000 mm |
| Khalefo | O, H111, H32, le ba bang (H12 ho ea ho H38) |
| Phekolo ea Bokaholimo | Ho sila, ho bentsha, ho hlatsoa, anodizing, etc. |
Ho utloisisa thepa ea mochini ea 5454 aluminium sheet plate is essential for determining its suitability for various applications, since the mechanical properties of 5454 alloys of different temperatures vary greatly, taking the O state as an example, the following table shows the mechanical properties of 5454-O:
| Thepa ea Mechini | Metric Value | Conditions/Comments |
|---|---|---|
| Ho thatafala, Brinell | 62 | AA; E tloaelehileng; 500 g load; 10 mm bolo |
| Ho thatafala, Knoop | 85 | Converted from Brinell Hardness Value |
| Ho thatafala, Vickers | 72 | Converted from Brinell Hardness Value |
| Matla a tšepe, Qetellong | 248 MPa | AA; E tloaelehileng |
| 41.0 MPa | @ 371 °C / 700 °F | |
| 75.0 MPa | @ 316 °C / 601 °F | |
| 115 MPa | @ 260 °C / 500 °F | |
| 150 MPa | @ 204 °C / 399 °F | |
| 200 MPa | @ 149 °C / 300 °F | |
| 250 MPa | @ -28.0 °C / -18.4 °F | |
| 250 MPa | @ 24.0 °C / 75.2 °F | |
| 250 MPa | @ 100 °C / 212 °F | |
| 255 MPa | @ -80.0 °C / -112 °F | |
| 370 MPa | @ -196 °C / -321 °F | |
| Matla a tšepe, Khefutsa | 117 MPa | AA; E tloaelehileng |
| 29.0 MPa | @ 371 °C / 700 °F | |
| 50.0 MPa | @ 316 °C / 601 °F | |
| 75.0 MPa | @ 260 °C / 500 °F | |
| 105 MPa | @ 204 °C / 399 °F | |
| 110 MPa | @ 149 °C / 300 °F | |
| 115 MPa | @ -80.0 °C / -112 °F | |
| 115 MPa | @ -28.0 °C / -18.4 °F | |
| 115 MPa | @ 24.0 °C / 75.2 °F | |
| 115 MPa | @ 100 °C / 212 °F | |
| 130 MPa | @ -196 °C / -321 °F | |
| Elongation at Break | 25 % | @ 24.0 °C / 75.2 °F |
| 27 % | @ -28.0 °C / -18.4 °F | |
| 30 % | @ -80.0 °C / -112 °F | |
| 31 % | @ 100 °C / 212 °F | |
| 39 % | @ -196 °C / -321 °F | |
| 50 % | @ 149 °C / 300 °F | |
| 60 % | @ 204 °C / 399 °F | |
| 80 % | @ 260 °C / 500 °F | |
| 110 % | @ 316 °C / 601 °F | |
| 130 % | @ 371 °C / 700 °F | |
| 22 % | @ Thickness 1.59 mm / 0.0625 ho | |
| Modulus ea Elasticity | 70.3 GPA | AA; E tloaelehileng; Karolelano ea tsitsipano le khatello. Compression modulus is about 2% greater than tensile modulus. |
| Notched Tensile Strength | 221 MPa | 2.5 cm width x 0.16 cm thick side-notched specimen, Kt = 17. |
| Ultimate Bearing Strength | 427 MPa | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 165 MPa | Edge distance/pin diameter = 2.0 |
| Karolelano ea Pisces | 0.33 | Estimated from trends in similar Al alloys. |
| Mokhathala Matla | 120 MPa | @ 5.00e+8 cycles; unnotched R. R. Moore rotating beam |
| Shear Modulus | 26.0 GPA | Estimated from similar Al alloys. |
| Matla a Shear | 159 MPa | AA; E tloaelehileng |
This table provides a comprehensive overview of the mechanical properties of the 5454 motsoako, ho kenyeletsa le boima, matla a tšepe, elongation, modulus of elasticity, le ho feta, under various conditions and temperatures. The “Conditions/Comments” column provides additional details about the specific test parameters or the nature of the property measurement.
The 5454 Letlapa la aluminium le sebelisoa mefuteng e mengata ea lisebelisoa ka lebaka la motsoako o ikhethang oa thepa:
Letlapa la aluminium la 5454-H32 le sebelisetsoa litanka tsa ho kenya letsoho le likoloi tsa litanka tse bentšitsoeng, e fanang ka ho ikamahanya le dibaka tse senyang:
| Thepa | Boleng |
| Matla a tšepe | 276 MPa |
| Kotulo Matla | 207 MPa |
| Modulus ea Elasticity | 70.3 GPA |
| Elongation at Break | 18%
@Temperature 24.0 °C |
| Ho thatafala | 73 Brinell |
The 5454 H111 aluminium sheet sheet e hloekisoa ka mocheso bakeng sa matla a phahameng le ho theola ductility, e loketseng meaho ea leoatle le likepe tsa khatello:
| Thepa | Boleng |
| Matla a tšepe | 262 MPa |
| Kotulo Matla | 179 MPa |
| Modulus ea Elasticity | 70.3 GPA |
| Elongation at Break | 14%
@Botenya 1.59 mm |
| Ho thatafala | 70 Brinell |
The 5454 O letlapa la aluminium poleiti, boemong ba bohlasoa, e fana ka ductility e phahameng le sebopeho se setle:
| Thepa | Boleng |
| Matla a tšepe | 165 MPa |
| Kotulo Matla | 65 MPa |
| Modulus ea Elasticity | 70 GPA |
| Elongation at Break | 25% |
| Ho thatafala | 62 Brinell |
The 5454 Aluminium e amoheloa ka litekanyetso tse fapaneng, e ka bang le diphapano tse nyane mekgweng ya tlhahiso kapa mamello:
Ho bohlokoa ho shebana le maemo a ikhethileng a hlokahalang bakeng sa kopo ea hau ho netefatsa hore thepa e fihlela litlhoko tse hlokahalang.
Bakeng sa lipotso tse ling, lintlha tse qaqileng, kapa ho fana ka taelo, ikopanye le Huasheng Aluminium, '5454 Aluminium Sheet Plate ea hau e tšepahalang’ feme le morekisi. Sehlopha sa rona sa litsebi se ikemiselitse ho u thusa ka litlhoko tsohle tsa hau tsa aluminium.
Selelekela Ho Huawei Alumi.
Selelekela Huasheng Alu…
Rea u amohela ho HuaSheng Aluminium……
Ka HuaSheng Aluminium, re kopa ……
Rea u amohela ho Huasheng Aluminium…
Rea u amohela ho HuaSheng Aluminium……
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le tšebeletso ea poleiti ea aluminium, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2023. Litokelo tsohle li sirelelitsoe.
