Codsiyada 5454 Aluminium Plate - Huasheng Aluminium

5454 Saxanka aluminiumka ah

2024-04-30 08:38:50

Tilmaamid	Range ama Options
Dhumucda	0.2mm ilaa 250mm
Ballaca	500 mm ku 2500 mm
Dhererka	1000 mm ku 12000 mm
xanaaq	O, H111, H32, iyo kuwo kale (H12 ilaa H38)
Daaweynta Dusha sare	shiidid, dhalaalid, cadayashada, anodizing, iwm.

La wadaag

Hordhac

Aluminium Alloys-ka waxaa lagu yaqaannaa kala duwanaanshahooda iyo saamiga xoogga-ilaa-miisaanka, iyaga oo ka dhigaya doorasho caan ka ah warshadaha kala duwan. Alloys kuwan, ah 5454 Aluminium Sheet Plate wuxuu u taagan yahay xooggiisa sare, iska caabin daxalka aad u fiican, iyo qaabayn sare. Maqaalkani wuxuu si qoto dheer u eegayaa waxyaabaha gaarka ah ee 5454 Saxanka aluminiumka ah, faa'iidooyinkeeda, tilmaamo, sifooyinka farsamada, codsiyada, iyo qaar kaloo badan.

Waa maxay 5454 Aluminium?

The 5454 Aluminium Sheet Plate waa aluminium-magnesium daawaha aluminium-magnesium aluminium-xoog sare leh oo si weyn loogu isticmaalo dhismaha maraakiibta iyo warshadaha gaadiidka.. Waxay caan ku tahay iska caabbinta daxalka, gaar ahaan biyaha badda iyo meelaha kale ee daxalka leh, taasoo ka dhigaysa mid ku habboon codsiyada badda.

Halabuurka Kiimikada

Halabuurka kiimikada ee 5454 saxan xaashida aluminium ah ayaa muhiim u ah sifooyinkeeda waxqabad. Halkan waxaa ah faahfaahin faahfaahsan:

Qayb ka mid ah	Metric Percentage Range
Aluminium (Al)	94.4 – 97.1 %
Chromium (Cr)	0.05 – 0.20 %
Copper (Cu)	≤ 0.10 %
Birta (Fe)	≤ 0.40 %
Magnesium (Mg)	2.4 – 3.0 %
Manganese (Mn)	0.50 – 1.0 %
Mid kale, mid walba	≤ 0.05 %
Mid kale, wadarta guud	≤ 0.15 %
Silikoon (Iyo)	≤ 0.25 %
Titanium (ee)	≤ 0.20 %
Zinc (Zn)	≤ 0.25 %

Faa'iidooyinka 5454 saxan xaashida aluminium

The 5454 Saxanka xaashida aluminiumku wuxuu bixiyaa faa'iidooyin kala duwan oo ka dhigaya doorasho la doorbido codsiyo badan:

Xoog Sare: Waxay bixisaa daacadnimo qaabdhismeed deegaan qallafsan.
Iska caabin Daxalka oo heersare ah: Ku habboon in loo isticmaalo biyaha badda iyo meelaha daxalka leh.
Habayn Wacan: Si fudud ayaa loo samayn karaa iyadoo la isticmaalayo hababka caadiga ah.
Weldability: Waxay sahlaysa habka wax soo saarka iyo dayactirka fudud.
Mashiinka: Waxay u ogolaataa makiinado hufan iyo dhamaystirid.

Tilmaamaha 5454 saxan xaashida aluminium

The 5454 Saxanka xaashida aluminiumku wuxuu leeyahay dhumucyo kala duwan, ballacyada, iyo dhererka, waxaana lagu siin karaa xanaaqo kala duwan:

Tilmaamid	Range ama Options
Dhumucda	0.2mm ilaa 250mm
Ballaca	500 mm ku 2500 mm
Dhererka	1000 mm ku 12000 mm
xanaaq	O, H111, H32, iyo kuwo kale (H12 ilaa H38)
Daaweynta Dusha sare	shiidid, dhalaalid, cadayashada, anodizing, iwm.

Guryaha Makaanikada

Fahamka sifooyinka farsamada ee 5454 aluminium sheet plate is essential for determining its suitability for various applications, since the mechanical properties of 5454 alloys of different temperatures vary greatly, taking the O state as an example, the following table shows the mechanical properties of 5454-O:

Hantida Makaanikada	Metric Value	Conditions/Comments
Adag, Brinell	62	AA; Caadiyan; 500 g load; 10 kubad mm
Adag, Knoop	85	Converted from Brinell Hardness Value
Adag, Vickers	72	Converted from Brinell Hardness Value
Xoogga Jilicsan, Ugu dambayn	248 MPa	AA; Caadiyan
	41.0 MPa	@ 371 °C / 700 °F
	75.0 MPa	@ 316 °C / 601 °F
	115 MPa	@ 260 °C / 500 °F
	150 MPa	@ 204 °C / 399 °F
	200 MPa	@ 149 °C / 300 °F
	250 MPa	@ -28.0 °C / -18.4 °F
	250 MPa	@ 24.0 °C / 75.2 °F
	250 MPa	@ 100 °C / 212 °F
	255 MPa	@ -80.0 °C / -112 °F
	370 MPa	@ -196 °C / -321 °F
Xoogga Jilicsan, Wax-soo-saarka	117 MPa	AA; Caadiyan
	29.0 MPa	@ 371 °C / 700 °F
	50.0 MPa	@ 316 °C / 601 °F
	75.0 MPa	@ 260 °C / 500 °F
	105 MPa	@ 204 °C / 399 °F
	110 MPa	@ 149 °C / 300 °F
	115 MPa	@ -80.0 °C / -112 °F
	115 MPa	@ -28.0 °C / -18.4 °F
	115 MPa	@ 24.0 °C / 75.2 °F
	115 MPa	@ 100 °C / 212 °F
	130 MPa	@ -196 °C / -321 °F
Kordhinta xilliga Nasashada	25 %	@ 24.0 °C / 75.2 °F
	27 %	@ -28.0 °C / -18.4 °F
	30 %	@ -80.0 °C / -112 °F
	31 %	@ 100 °C / 212 °F
	39 %	@ -196 °C / -321 °F
	50 %	@ 149 °C / 300 °F
	60 %	@ 204 °C / 399 °F
	80 %	@ 260 °C / 500 °F
	110 %	@ 316 °C / 601 °F
	130 %	@ 371 °C / 700 °F
	22 %	@ Thickness 1.59 mm / 0.0625 gudaha
Qaabka Elasticity	70.3 GPA	AA; Caadiyan; Celceliska xiisadda iyo cadaadiska. Compression modulus is about 2% greater than tensile modulus.
Notched Tensile Strength	221 MPa	2.5 cm width x 0.16 cm thick side-notched specimen, Kt = 17.
Ultimate Bearing Strength	427 MPa	Edge distance/pin diameter = 2.0
Bearing Yield Strength	165 MPa	Edge distance/pin diameter = 2.0
Saamiga Kalluunka	0.33	Estimated from trends in similar Al alloys.
Xoogga Daalka	120 MPa	@ 5.00e+8 cycles; unnotched R. R. Moore rotating beam
Modul jeex	26.0 GPA	Estimated from similar Al alloys.
Xoog xiirid	159 MPa	AA; Caadiyan

This table provides a comprehensive overview of the mechanical properties of the 5454 daawaha, oo ay ku jiraan adkaanta, xoog adkaysi, dheerayn, modulus of elasticity, iyo qaar kaloo badan, under various conditions and temperatures. The “Conditions/Comments” column provides additional details about the specific test parameters or the nature of the property measurement.

Codsiyada 5454 saxan xaashida aluminium

The 5454 saxan xaashida aluminium ah ayaa laga helaa isticmaalka noocyo badan oo codsiyo ah sababtoo ah isku darka gaarka ah ee guryaha:

Codsiyada badda: Dhismaha doon, dhisidda maraakiibta, iyo dhuumaha badda.
Gaadiidka: Gawaarida xamuulka ah iyo meydadka gawaarida, qaybaha baabuurta.
Maraakiibta cadaadiska: Haamaha iyo maraakiibta saliidda iyo gaaska.
Dhismaha: Haamaha dahaarka, baabuurta taangiyada ee la safeeyey, iyo qaybaha dhismaha.

Caadiyan 5454 Taarikada aluminiumka

5454 H32 saxan xaashida aluminium ah

Saxanka xaashida aluminium ee 5454-H32 waxaa loo isticmaalaa taangiyada dahaarka iyo baabuurta taangiga ee la safeeyey., siinta la qabsiga deegaanka daxalka:

Hanti	Qiimaha
Xoogga Jilicsan	276 MPa
Xoogga Wax-soo-saarka	207 MPa
Qaabka Elasticity	70.3 GPA
Kordhinta xilliga Nasashada	18% @Temperature 24.0 °C
Adag	73 Brinell

5454 H111 saxan xaashida aluminium ah

The 5454 H111 saxan xaashida aluminiumka ah waxaa lagu daaweeyaa kulaylka xoog sare iyo ductility hoose, ku habboon qaab-dhismeedka badda iyo maraakiibta cadaadiska:

Hanti	Qiimaha
Xoogga Jilicsan	262 MPa
Xoogga Wax-soo-saarka	179 MPa
Qaabka Elasticity	70.3 GPA
Kordhinta xilliga Nasashada	14% @Duufaan 1.59 mm
Adag	70 Brinell

5454 O saxan xaashida aluminium ah

The 5454 O xaashi aluminium saxan, ee gobolka la tirtiray, waxay bixisaa ductility sare iyo qaabayn wanaagsan:

Hanti	Qiimaha
Xoogga Jilicsan	165 MPa
Xoogga Wax-soo-saarka	65 MPa
Qaabka Elasticity	70 GPA
Kordhinta xilliga Nasashada	25%
Adag	62 Brinell

Heerarka u dhigma ee aluminiumka 5454

The 5454 Aluminium waxaa lagu aqoonsan yahay heerar kala duwan, Kaas oo laga yaabo inuu ku kala duwanaado yar habka wax soo saarka ama dulqaadka:

US A95454
ASTM B209
AMS QQ-A-250/10
EN AW-5454
ISO AlMg3Mn
A-G5M

Waa muhiim inaad la tashato heerka gaarka ah ee looga baahan yahay codsigaaga si loo hubiyo in agabku buuxiyo shuruudaha lagama maarmaanka ah.

Nala soo xiriir

Wixii su'aalo dheeraad ah, tilmaamo faahfaahsan, ama in la dalbado, la xidhiidh Huasheng Aluminium, saxankaaga '5454 Aluminium Sheet Plate' ee lagu kalsoonaan karo’ warshad iyo jumlad. Kooxdayada xirfadlayaasha ah ayaa diyaar u ah inay kaa caawiyaan dhammaan baahiyahaaga aluminium.