| Specification | Range vel Options |
| Crassitudo | 0.2mm ad 250mm |
| Latitudo | 500 mm to 2500 mm |
| Longitudo | 1000 mm to 12000 mm |
| Ingenium | O*, H111, H32, et alii (H12 ad H38) |
| Superficiem treatment | molendum, ut tincidunt, percutientium, anodizing, etc. |
Aluminium mixturas nota sunt propter mobilitatem et fortitudinem ad rationem ponderis, faciens ea popularis arbitrium per varias industries. Inter haec alloys, the 5454 Aluminium Sheet Plate eminet pro suo altissimo robore, optimum corrosio resistentia, et superior forma. Hic articulus in particularia " 5454 Aluminium Sheet Plate, commoda sua, specifications, mechanica proprietatibus, applications, et plus.
The 5454 Aluminium Sheet Plate Aluminium Magnesium stannum vi magna est quae late in aedificandis et invehendis industriis adhibetur. Celebris est ob eius excellentem corrosionem resistentiam, maxime in marinis et aliis mordax ambitus, facit apta marinis applicationes.
De compositione chemica 5454 aluminium sheet lamina critica ad indolem perficiendam. Hic est detailed naufragii:
| Component Element | Metric Percentage Range |
|---|---|
| aluminium (Al) | 94.4 – 97.1 % |
| Chromium (Cr) | 0.05 – 0.20 % |
| Copper (Cu) | ≤ 0.10 % |
| Ferrum (Fe) | ≤ 0.40 % |
| Magnesium (Mg) | 2.4 – 3.0 % |
| Manganese (Mn) | 0.50 – 1.0 % |
| Other, quisque | ≤ 0.05 % |
| Other, total | ≤ 0.15 % |
| Pii (Et) | ≤ 0.25 % |
| Titanium (Of) | ≤ 0.20 % |
| Zinc (Zn) | ≤ 0.25 % |
The 5454 aluminium scheda bracteae praebet amplis beneficiis quae eam praeoptavit pro multis applicationibus:
The 5454 aluminium sheet lamina in variis crassitudinibus praesto, latitudines, et longitudines, et diversis ingeniis suppleri potest:
| Specification | Range vel Options |
| Crassitudo | 0.2mm ad 250mm |
| Latitudo | 500 mm to 2500 mm |
| Longitudo | 1000 mm to 12000 mm |
| Ingenium | O*, H111, H32, et alii (H12 ad H38) |
| Superficiem treatment | molendum, ut tincidunt, percutientium, anodizing, etc. |
Intelligentes mechanicas proprietates 5454 aluminium lamina necessaria est ad determinandum eius idoneitatem ad varias applicationes, since the mechanical properties of 5454 alloys of different temperatures vary greatly, taking the O state as an example, the following table shows the mechanical properties of 5454-O:
| Mechanica Property | Metric Value | Conditions/Comments |
|---|---|---|
| duritia, Brinell | 62 | AA; Typical; 500 g load; 10 mm pila |
| duritia, Knoop | 85 | Converted from Brinell Hardness Value |
| duritia, Vickers | 72 | Converted from Brinell Hardness Value |
| Distrahentes fortitudo, Ultima | 248 MPa | AA; Typical |
| 41.0 MPa | @ 371 °C / 700 °F | |
| 75.0 MPa | @ 316 °C / 601 °F | |
| 115 MPa | @ 260 °C / 500 °F | |
| 150 MPa | @ 204 °C / 399 °F | |
| 200 MPa | @ 149 °C / 300 °F | |
| 250 MPa | @ -28.0 °C / -18.4 °F | |
| 250 MPa | @ 24.0 °C / 75.2 °F | |
| 250 MPa | @ 100 °C / 212 °F | |
| 255 MPa | @ -80.0 °C / -112 °F | |
| 370 MPa | @ -196 °C / -321 °F | |
| Distrahentes fortitudo, Cede | 117 MPa | AA; Typical |
| 29.0 MPa | @ 371 °C / 700 °F | |
| 50.0 MPa | @ 316 °C / 601 °F | |
| 75.0 MPa | @ 260 °C / 500 °F | |
| 105 MPa | @ 204 °C / 399 °F | |
| 110 MPa | @ 149 °C / 300 °F | |
| 115 MPa | @ -80.0 °C / -112 °F | |
| 115 MPa | @ -28.0 °C / -18.4 °F | |
| 115 MPa | @ 24.0 °C / 75.2 °F | |
| 115 MPa | @ 100 °C / 212 °F | |
| 130 MPa | @ -196 °C / -321 °F | |
| Elongation at Break | 25 % | @ 24.0 °C / 75.2 °F |
| 27 % | @ -28.0 °C / -18.4 °F | |
| 30 % | @ -80.0 °C / -112 °F | |
| 31 % | @ 100 °C / 212 °F | |
| 39 % | @ -196 °C / -321 °F | |
| 50 % | @ 149 °C / 300 °F | |
| 60 % | @ 204 °C / 399 °F | |
| 80 % | @ 260 °C / 500 °F | |
| 110 % | @ 316 °C / 601 °F | |
| 130 % | @ 371 °C / 700 °F | |
| 22 % | @ Thickness 1.59 mm / 0.0625 in | |
| Modulus Elasticitatis | 70.3 GPa | AA; Typical; Mediocris tensio et compressio. Compression modulus is about 2% greater than tensile modulus. |
| Notched Tensile Strength | 221 MPa | 2.5 cm width x 0.16 cm thick side-notched specimen, Kt = 17. |
| Ultimate Bearing Strength | 427 MPa | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 165 MPa | Edge distance/pin diameter = 2.0 |
| Pisces Ratio | 0.33 | Estimated from trends in similar Al alloys. |
| Lassitudo fortitudo | 120 MPa | @ 5.00e+8 cycles; unnotched R. R. Moore rotating beam |
| tondendas Modulus | 26.0 GPa | Estimated from similar Al alloys. |
| tondendas fortitudo | 159 MPa | AA; Typical |
This table provides a comprehensive overview of the mechanical properties of the 5454 mixtura, including hardness, distrahentes fortitudo, elongatio, modulus of elasticity, et plus, under various conditions and temperatures. The “Conditions/Comments” column provides additional details about the specific test parameters or the nature of the property measurement.
The 5454 aluminium laminam schedae usui invenit in applicationibus late ordinata ob singulares proprietates complexionis:
5454-H32 aluminium scheda bracteae pro velit lacus et lacus polita carros adhibentur, offerendo aptam mordax ambitus:
| Property | Precium |
| Distrahentes fortitudo | 276 MPa |
| Cedat imperium | 207 MPa |
| Modulus Elasticitatis | 70.3 GPa |
| Elongation at Break | 18%
@Temperature 24.0 °C |
| duritia | 73 Brinell |
The 5454 H111 aluminium lamina est calor tractata pro viribus superioribus et ductilis inferioribus, apta marinis structurae et pressionis vasorum:
| Property | Precium |
| Distrahentes fortitudo | 262 MPa |
| Cedat imperium | 179 MPa |
| Modulus Elasticitatis | 70.3 GPa |
| Elongation at Break | 14%
@Thickness 1.59 mm |
| duritia | 70 Brinell |
The 5454 O aluminium lamina lamina, in annealed civitate, princeps ductility et bonam formam praebet:
| Property | Precium |
| Distrahentes fortitudo | 165 MPa |
| Cedat imperium | 65 MPa |
| Modulus Elasticitatis | 70 GPa |
| Elongation at Break | 25% |
| duritia | 62 Brinell |
The 5454 Aluminium variis signis, quae possunt habere parvas differentias in fabricandis processibus seu tolerances:
Magnopere est consulere vexillum specificum pro applicatione tua requisita, ut materias necessarias requisita in tuto collocet.
Nam ulteriores inquisitiones, detailed specifications, aut ponere ordinem, Aluminium Huasheng contactum, fidelissimum '5454 Aluminium Sheet Plate’ officinas et wholesaler. Manipulus doctorum noster paratus est te adiuvare cum omnibus tuis aluminis necessitatibus.
Introductio 1060 Aluminium ......
Introductio: In Huasheng Al…
Introductio Aluminium offensionum ........
Introductio 1070 Aluminium ......
Introductio to 3004 Aluminium ......
Introductio Gratam Huas ......
Henan Huasheng Aluminium Co., Ltd (HHALU pro brevi), statutum 2001, sita in Huiguo Urbs, ille Aluminium caput Henan Province, Est professionalis fabrica et in investigatione versatur, progressus, Fabricatio, venditio et servitium aluminii laminae, aluminium coil, aluminium ffoyle, aluminium habena et aluminium circulus.
Autem, HHALU etiam laminam aluminium fabricandi et navium vendere, Aluminium Speculum laminae, et autocinetum aluminium mixturae lamellae.
No.53, Dongming Road, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2023. All rights reserved.
