| Specification | Ntau lossis Kev Xaiv |
| Thickness | 0.2mm rau 250 mm |
| Dav | 500 mm rau 2500 mm |
| Ntev | 1000 mm rau 12000 mm |
| Kub | O, H111, H32, thiab lwm tus (H12 to H38) |
| Kev kho saum npoo | Sib tsoo, polishing, txhuam hniav, anodizing, lwm. |
Aluminium alloys paub txog lawv cov versatility thiab lub zog-rau-qhov hnyav piv, ua rau lawv muaj kev xaiv nrov thoob plaws ntau yam kev lag luam. Ntawm cov alloys no, tus 5454 Aluminium Sheet Phaj sawv tawm rau nws lub zog siab, zoo heev corrosion kuj, thiab superior formability. Kab lus no delves rau hauv qhov tshwj xeeb ntawm lub 5454 Aluminium Sheet Phaj, nws qhov zoo, specifications, mechanical zog, daim ntawv thov, thiab ntau dua.
Cov 5454 Aluminium Sheet Phaj yog lub zog muaj zog aluminium-magnesium alloy uas tau siv dav hauv kev lag luam nkoj thiab kev thauj mus los.. Nws yog renowned rau nws zoo heev corrosion kuj, tshwj xeeb tshaj yog nyob rau hauv dej hiav txwv thiab lwm yam corrosive ib puag ncig, ua rau nws zoo tagnrho rau kev siv marine.
Cov tshuaj muaj pes tsawg leeg ntawm 5454 aluminium ntawv phaj yog qhov tseem ceeb rau nws cov yam ntxwv ua haujlwm. Ntawm no yog cov ncauj lus kom ntxaws:
| Cheebtsam Element | Metric Percentage Range |
|---|---|
| Aluminium (Al) | 94.4 – 97.1 % |
| Chromium (Cr) | 0.05 – 0.20 % |
| Tooj (Cu) | ≤ 0.10 % |
| Hlau (Fe) | ≤ 0.40 % |
| Magnesium (Mg) | 2.4 – 3.0 % |
| Manganese (Mn) | 0.50 – 1.0 % |
| Lwm yam, txhua | ≤ 0.05 % |
| Lwm yam, tag nrho | ≤ 0.15 % |
| Silicon (Thiab) | ≤ 0.25 % |
| Titanium (Ntawm) | ≤ 0.20 % |
| Zinc (Zn) | ≤ 0.25 % |
Cov 5454 aluminium ntawv phaj muaj ntau yam txiaj ntsig uas ua rau nws nyiam xaiv rau ntau daim ntawv thov:
Cov 5454 aluminium ntawv phaj muaj nyob rau hauv ntau yam thicknesses, qhov dav, thiab ntev, thiab tuaj yeem muab tau rau hauv ntau tempers:
| Specification | Ntau lossis Kev Xaiv |
| Thickness | 0.2mm rau 250 mm |
| Dav | 500 mm rau 2500 mm |
| Ntev | 1000 mm rau 12000 mm |
| Kub | O, H111, H32, thiab lwm tus (H12 to H38) |
| Kev kho saum npoo | Sib tsoo, polishing, txhuam hniav, anodizing, lwm. |
Nkag siab txog cov khoom siv kho tshuab ntawm cov 5454 aluminium ntawv phaj yog qhov tseem ceeb rau kev txiav txim siab nws qhov tsim nyog rau ntau yam kev siv, since the mechanical properties of 5454 alloys of different temperatures vary greatly, taking the O state as an example, the following table shows the mechanical properties of 5454-O:
| Mechanical Property | Metric Value | Conditions/Comments |
|---|---|---|
| Hardness, Brinell | 62 | AA; Hom; 500 g load; 10 mm pob |
| Hardness, Knoop | 85 | Converted from Brinell Hardness Value |
| Hardness, Vickers | 72 | Converted from Brinell Hardness Value |
| Tensile zog, Qhov kawg | 248 MPa | AA; Hom |
| 41.0 MPa | @ 371 °C / 700 ° F | |
| 75.0 MPa | @ 316 °C / 601 ° F | |
| 115 MPa | @ 260 °C / 500 ° F | |
| 150 MPa | @ 204 °C / 399 ° F | |
| 200 MPa | @ 149 °C / 300 ° F | |
| 250 MPa | @ -28.0 °C / -18.4 ° F | |
| 250 MPa | @ 24.0 °C / 75.2 ° F | |
| 250 MPa | @ 100 °C / 212 ° F | |
| 255 MPa | @ -80.0 °C / -112 ° F | |
| 370 MPa | @ -196 °C / -321 ° F | |
| Tensile zog, Yield | 117 MPa | AA; Hom |
| 29.0 MPa | @ 371 °C / 700 ° F | |
| 50.0 MPa | @ 316 °C / 601 ° F | |
| 75.0 MPa | @ 260 °C / 500 ° F | |
| 105 MPa | @ 204 °C / 399 ° F | |
| 110 MPa | @ 149 °C / 300 ° F | |
| 115 MPa | @ -80.0 °C / -112 ° F | |
| 115 MPa | @ -28.0 °C / -18.4 ° F | |
| 115 MPa | @ 24.0 °C / 75.2 ° F | |
| 115 MPa | @ 100 °C / 212 ° F | |
| 130 MPa | @ -196 °C / -321 ° F | |
| Elongation ntawm Break | 25 % | @ 24.0 °C / 75.2 ° F |
| 27 % | @ -28.0 °C / -18.4 ° F | |
| 30 % | @ -80.0 °C / -112 ° F | |
| 31 % | @ 100 °C / 212 ° F | |
| 39 % | @ -196 °C / -321 ° F | |
| 50 % | @ 149 °C / 300 ° F | |
| 60 % | @ 204 °C / 399 ° F | |
| 80 % | @ 260 °C / 500 ° F | |
| 110 % | @ 316 °C / 601 ° F | |
| 130 % | @ 371 °C / 700 ° F | |
| 22 % | @ Thickness 1.59 mm / 0.0625 hauv | |
| Modulus ntawm Elasticity | 70.3 GPa | AA; Hom; Nruab nrab ntawm nro thiab compression. Compression modulus is about 2% greater than tensile modulus. |
| Notched Tensile Strength | 221 MPa | 2.5 cm width x 0.16 cm thick side-notched specimen, Kt = 17. |
| Ultimate Bearing Strength | 427 MPa | Edge distance/pin diameter = 2.0 |
| Bearing Yield Strength | 165 MPa | Edge distance/pin diameter = 2.0 |
| Pisces Ratio | 0.33 | Estimated from trends in similar Al alloys. |
| Kev qaug zog | 120 MPa | @ 5.00e+8 cycles; unnotched R. R. Moore rotating beam |
| Shear Modulus | 26.0 GPa | Estimated from similar Al alloys. |
| Shear Strength | 159 MPa | AA; Hom |
This table provides a comprehensive overview of the mechanical properties of the 5454 hlau alloy, including hardness, tensile zog, elongation, modulus of elasticity, thiab ntau dua, under various conditions and temperatures. Cov “Conditions/Comments” column provides additional details about the specific test parameters or the nature of the property measurement.
Cov 5454 aluminium ntawv phaj pom siv nyob rau hauv ib tug dav array ntawm daim ntaub ntawv vim nws tshwj xeeb ua ke ntawm cov khoom:
5454-H32 txhuas ntawv phaj yog siv rau rwb thaiv tsev tso tsheb hlau luam thiab polished tank tsheb, muab adaptability rau corrosive ib puag ncig:
| Khoom | Tus nqi |
| Tensile zog | 276 MPa |
| Yield zog | 207 MPa |
| Modulus ntawm Elasticity | 70.3 GPa |
| Elongation ntawm Break | 18%
@Temperature 24.0 °C |
| Hardness | 73 Brinell |
Cov 5454 H111 txhuas ntawv phaj yog kub-kho rau siab zog thiab qis ductility, haum rau cov qauv marine thiab cov hlab ntsha siab:
| Khoom | Tus nqi |
| Tensile zog | 262 MPa |
| Yield zog | 179 MPa |
| Modulus ntawm Elasticity | 70.3 GPa |
| Elongation ntawm Break | 14%
@Thickness 1.59 mm |
| Hardness | 70 Brinell |
Cov 5454 O aluminium ntawv phaj, nyob rau hauv lub xeev annealed, muab siab ductility thiab zoo formability:
| Khoom | Tus nqi |
| Tensile zog | 165 MPa |
| Yield zog | 65 MPa |
| Modulus ntawm Elasticity | 70 GPa |
| Elongation ntawm Break | 25% |
| Hardness | 62 Brinell |
Cov 5454 Aluminium tau lees paub los ntawm ntau yam qauv, uas tej zaum yuav muaj qhov sib txawv me ntsis hauv kev tsim khoom lossis kev kam rau siab:
Nws yog ib qho tseem ceeb uas yuav tau tham txog cov txheej txheem tshwj xeeb uas yuav tsum tau ua rau koj daim ntawv thov kom ntseeg tau tias cov khoom ua tau raws li qhov yuav tsum tau ua.
Yog xav paub ntxiv, ncauj lus kom ntxaws specifications, los yog muab qhov kev txiav txim, hu rau Huasheng Aluminium, koj txhim khu kev qha '5454 Aluminium Sheet Plate’ Hoobkas thiab wholesaler. Peb pab neeg ntawm cov kws tshaj lij yog npaj los pab koj nrog tag nrho koj cov kev xav tau ntawm txhuas.
Taw qhia 1060 Aluminium……
Taw qhia: Ntawm Huasheng Al…
Taw qhia Aluminium alloy ……
Taw qhia 1070 Aluminium……
Taw qhia rau 3004 Aluminium……
Taw qhia Welcome to Huas……
Henan Huasheng Aluminium Co., Ltd., Ltd (HHALU for short), tsim nyob rau hauv 2001, nyob hauv Huiguo Town, lub npe nrov Aluminium peev ntawm Henan Xeev, Nws yog ib lub chaw tsim khoom thiab koom nrog kev tshawb fawb, kev loj hlob, ntau lawm, kev muag khoom thiab kev pabcuam ntawm aluminium ntawv phaj, aluminium coil, aluminium ntawv ci, aluminium strip thiab aluminium voj voog.
Ntxiv rau, HHALU kuj muag txhuas phaj rau kev tsim kho thiab nkoj, aluminium daim iav phaj, thiab automotive aluminium alloy phaj.
No.53, Dongming Txoj Kev, Zhengzhou, Henan, Tuam Tshoj
Copyright © Huasheng Aluminium 2023. Txhua txoj cai.
