Halabuurka Kiimikada 5083 Xaashida aluminiumka & Saxan
| (Al) |
92.4 – 95.6 % |
| (Mg) |
4.0 – 4.9 % |
| (Mn) |
0.40 – 1.0 % |
| (Cr) |
0.05 – 0.25 % |
| (Cu) |
<= 0.10 % |
| (Fe) |
<= 0.40 % |
| (Iyo) |
<= 0.40 % |
| (Zn) |
<= 0.25 % |
| (ee) |
<= 0.15 % |
| Kuwo kale |
<= 0.05 % for each, <= 0.15 % for total |
5083 Xaashida aluminiumka & Waxqabadka Habaynta Saxanka
The 5083 saxan aluminium ah ayaa u taagan sida walxaha la doorbido ee warshadaha sida dhisitaanka maraakiibta, hawada sare, baabuur, iyo samaynta mishiinada, Thanks to tayada sare leh oo ay ku jiraan xoogga sare, iska caabin daxalka aad u fiican, iyo weldability cajiib ah. Waxqabadkeeda inta lagu jiro farsamaynta waxaa lagu gartaa dhowr siyaalood oo faa'iido leh:
- Mashiinka: Waxay soo bandhigaysaa mashiin la ammaani karo, u oggolaanaya noocyo kala duwan oo farsamooyinka farsamaynta caadiga ah in lagu dabaqo si hufan. Tan waxaa ka mid ah hawlgallada sida wax-shiididda, shaabadeynta, iskala bixin, sawir qoto dheer, iyo foorarsi, iyo kuwo kale.
- Weldability: The 5083 saxan aluminium ah ayaa soo bandhigaysa alxanka wanaagsan, habaynta hababka alxanka kala duwan sida TIG (Tungsten gaaska inert), ANIGA (Birta Inert Gaas), iyo alxanka iska caabinta. Intaa waxaa dheer, waxa kale oo ay ku haboon tahay hababka alxanka khaaska ah sida alxanka qarxa iyo alxanka electroslag, xaaladaha qaarkood.
- Samaynta: Qalabkan waxaa lagu xusay qaab-dhismeedkiisa ugu fiican, awood u leh in si wax ku ool ah loogu qaabeeyo iyada oo loo marayo hababka shaqada qabow iyo kuwa kulul labadaba, iyada oo la raacayo shuruudaha wax soo saarka ee kala duwan.
- Waxqabadka Goynta: Marka ay timaado goynta, ah 5083 saxan aluminium ah ayaa si gaar ah u shaqeeya. Waxaa lagu gartaa xirashada qalabka gaabis ah iyo shuruudaha xoogga goynta ugu yar, kuwaas oo si wada jir ah gacan uga geysta kobcinta hufnaanta farsamaynta. Sifadan ayaa ka dhigaysa mid xitaa soo jiidasho leh oo loogu talagalay codsiyada dalbanaya habayn sax ah oo hufan.
Guryaha Makaanikada ee 5083 Aluminium Plate
Hoos waxaa ku yaal miis qeexaya sifooyinka farsamada ee caadiga ah 5083 xaashida aluminium iyo saxan ku jira xanaaq caadi ahaan la isticmaalo, sida H116 ama H321, kuwaas oo inta badan lagu isticmaalo deegaanka badda sababtoo ah caabbinta daxalka oo aad u fiican.
Take Aluminum 5083-H112 as an example:
| Hanti |
Unug |
Qiimaha |
| Xoogga Jilicsan |
MPa |
300 |
| Xoogga Wax-soo-saarka (0.2% Deminta) |
MPa |
190 MPa |
| Dheeraynta (in 50mm) |
% |
>= 12 |
| Brinell Hardness |
HB |
81 |
| Cufnaanta |
g/cm³ |
2.66 |
| Habdhaqanka kulaylka |
W/m·K |
117 |
| Waxqabadka Korontada (% IACS) |
% |
29 |
Ogow:For more information about other Temper 5083 alloys, fadlan booqo 5083 Aluminium
Guryahaan waxay sameeyaan 5083 xaashida aluminium iyo saxan si aad ah ayaa looga raadsadaa dalabaadka baddaha, hawada sare, baabuur, iyo qaybaha kale ee warshadaha halkaas oo labadaba xoogga iyo iska caabinta daxalka ay yihiin muhiim.
5083 Xaashida aluminiumka & Cabirka saxanka
La beddeli karo 5083 Xaashida aluminiumka & Tilmaamaha saxanka
The 5083 xaashi aluminium & saxanku waxa uu bixiyaa doorashooyin is-habayn oo kala duwan si loo buuxiyo shuruudaha gaarka ah ee soo saarayaasha iyo macaamiisha labadaba. Cabirrada la habeeyey waxay xaqiijinayaan ku habboonaanta codsiga ugu habboon.
Heerarka cabbirka ee la heli karo:
- Dhumucda: 0.2mm ilaa 200mm
- Ballaca: 100mm ilaa 2650mm
- Dhererka: 500mm ilaa 16000mm
Ogow: Cabbirka ugu dambeeya waxaa lagu go'aamiyaa iyadoo lagu saleynayo baahiyaha gaarka ah ee codsi kasta.
Dhumucda caadiga ah ee 5052 Xaashida aluminiumka & Saxan:
| Dabeecad Alloy |
Dhumucda (mm) |
Ballaca (mm) |
Dhererka (mm) |
| 5083 H32 |
4 |
1500 |
3500 |
| 5083 H32 |
1.5 |
1313 |
821 |
| 5083 H32 |
1.5 |
840 |
1360 |
| 5083 H32 |
1.5 |
840 |
1830 |
| 5083 H32 |
2 |
921 |
744 |
| 5083 H112 |
80 |
640 |
640 |
| 5083 O |
1.4 |
1500 |
3000 |
| 5083 O |
1.9 |
1500 |
3000 |
5083 Xaashida aluminiumka & Dulqaadashada Dhumucda saxanka
Dulqaadka dhumucda ee 5083 saxan aluminium ah waxaa lagu go'aamiyaa heerarka wax soo saarka gaarka ah iyo shuruudaha. Hoos waxaa ku yaal shax ku saabsan dulqaadka dhumucda guud ee alaabtan:
| Heerka |
Dhumucda |
Dulqaad |
| ASTM B209 |
< 6.35mm |
±0.05mm |
|
6.35-25.4mm |
±0.08mm |
|
> 25.4mm |
± 0.13mm |
| IN 485-3 |
< 6mm |
± 0.05mm ama ± 5% |
|
6-12mm |
± 0.1mm ama ± 5% |
|
> 12mm |
± 0.2mm ama ± 5% |
| GB/T 3880 |
< 6mm |
±0.1mm |
|
6-12mm |
±0.15mm |
|
> 12mm |
±0.2mm |
Ogow: Dulqaadyada kor ku taxan waa tilmaame waana in lagu xaqiijiyaa si waafaqsan heerarka wax soo saarka iyo shuruudaha dhabta ah.
Farqiga u dhexeeya EN 485-2 iyo EN 485-3:
- IN 485-2 waa lagu dabaqi karaa isticmaalka guud.
- IN 485-3 waxay gaar u tahay codsiyada hawada sare waxayna leedahay shuruudo adag oo ku saabsan qaabka kiimikada, sifooyinka farsamada, cabbirrada, habka daaweynta kulaylka, iyo tayada dusha sare.
Tayada dusha sare ee 5083 Xaashida aluminiumka & Saxan
Tayada dusha sare ee 5083 Xaashida aluminiumka & Saxan
| Dhanka tayada |
Sharaxaada |
| Fiican |
Dushu waa fidsan tahay, xor ka ah dagaal, soo bixitaan, niyad jab, ama cillado kale. |
| Midabka |
Dushu waa siman yihiin, lebis, midabkiisuna joogto yahay, aan lahayn miisaan oksaydh ah, dildilaaca, dooxa biyaha, ama cillado kale. |
| Nadaafadda |
Dushu waa nadiif, aan saliid lahayn, siigada, wasakh, ama wasakh kale oo jirta. |
| Lakabka oksaydhka |
Labbis iyo lakab oksaydh cufan ayaa ku yaal dusha sare. |
Qaab shaxeedkan ayaa si kooban u gudbinaya dhinacyada muhiimka ah ee tayada dusha sare ee 5083 xaashi aluminium & saxan.
5083 Xaashida aluminiumka & Saxan iib ah
| Darajo |
Sharaxaada |
Waxqabadka |
Codsiga |
| 5083-0 |
Saxanka daawaha aluminiumka ee la jilciyay ka dib markii la tirtiro. |
qaabaynta wanaagsan iyo waxqabadka habaynta, ku habboon shaabadeynta, iskala bixin, iyo sawir qoto dheer. |
Loo isticmaalo xaaladaha u baahan caag sare iyo waxqabadka habaynta, sida taangiyada, maraakiibta, iyo muraayadaha baabuurta. |
| 5083 H111 |
Saxan aluminium ah oo leh qallafsanaan iyo xoog la wanaajiyey sababtoo ah adkeynta shaqada iyo daaweynta gabowga dabiiciga ah. |
Waxay muujisaa xoog wanaagsan iyo iska caabin daxalka, ku habboon codsiyada u baahan xoog sare iyo iska caabin daxalka. |
Caadi ahaan loo isticmaalo deegaannada u baahan xoog la xoojiyay iyo iska caabbinta daxalka, sida qolof, sagxadaha, iyo qaybaha dhismaha markabka. Ku habboon makiinada iyo hawlaha alxanka. |
| 5083 H112 |
Saxan daawaha aluminiumka ah oo la demiyay oo leh xoog sare iyo adayg laakiin caag xaddidan. |
Waxay bixisaa xoog sare iyo iska caabin daxalka, sida caadiga ah loo isticmaalo xaaladaha dalbanaya xoog sare iyo iska caabin daxalka. |
Looga faa'iidaysto deegaan u baahan xoog sare iyo iska caabin daxalka, sida qolof, sagxadaha, iyo qaybaha dhismaha markabka. |
| 5083-H116 |
Saxanka daawaha aluminiumku waa la demiyay, fidiyey, lana xasiliyay, bixinta iska caabin daxalka wanaagsan iyo weldability. |
Inkasta oo xoogga hoose iyo adkaanta daawaynta qaboojinta ka dib, waxay ilaalisaa cudud sare iyo xoog dabacsanaan. |
Inta badan loo isticmaalo dhisidda maraakiibta, injineernimada badda, baabuurta tareenada, qalab ciidan, iyo beeraha kale ay sabab u tahay waxqabadka wanaagsan iyo isku halaynta, in kasta oo uu qaali yahay. |
| 5083-H321 |
Xaashida aluminiumka oo leh flatness la xoojiyey, weldability, iyo iska caabinta daxalka oo ay ugu wacan tahay daawaynta fidinta iyo fidsan. |
Waxay bixisaa flatness wanaagsan, weldability, iyo iska caabinta daxalka, ku haboon codsiyada u baahan xoog sare iyo iska caabin daxalka. |
Ku habboon maraakiibta xawaaraha sare leh, doomo, booyadaha shidaalka, iwm., u baahan xoog sare, iska caabin daxalka, flatness, iyo tayada dusha sare. |
Qodobbada ay tahay in la tixgeliyo marka la dooranayo 5083 Xaashida aluminiumka & Saxan
| Gobolka Daaweynta kulaylka |
Hanti |
Codsiga |
| 5083 O |
Balaastik sare iyo waxqabadka sawirka qoto dheer |
Ku habboon codsiyada u baahan caag sare iyo sawir qoto dheer, sida taangiyada iyo muraayadaha baabuurta. |
| 5083 H111 |
Xoog sare iyo iska caabin daxalka |
Ku habboon qaybaha qaabdhismeedka u baahan xoog iyo iska caabin daxalka, sida saqafka iyo sagxadaha. |
| 5083 H112 |
Xoog sare iyo qallafsanaan |
Loo isticmaalo codsiyada meelaha xoogga sare iyo adkaanta lagama maarmaanka u yahay, sida qaybaha dhismaha markabka. |
| 5083 H116 |
Iska caabin daxalka ka wanaagsan iyo weldability |
Badanaa waxaa loo doortaa dhisidda maraakiibta iyo injineernimada badda sababtoo ah alxanka iyo caabbinta daxalka. |
| 5083 H321 |
Fiican iyo tayada dusha sare ee wanaagsan |
Loo door biday maraakiibta dheeraysa, doomo, booyadaha shidaalka, halkaas oo fidsanaanta sare iyo tayada dusha sare ay muhiim tahay. |
Shaxdani waxa ay si degdeg ah u tixraacaysaa xaaladaha daaweynta kulaylka ee kala duwan 5083 aluminium aluminium iyo codsiyadooda lagu taliyay ee ku salaysan guryaha loo baahan yahay. Haddii aad qabto su'aalo dheeraad ah ama aad u baahan tahay gargaar dheeraad ah, xor u tahay inaad waydiiso!
Codsiyada 5083 Xaashida aluminiumka & Plate in Warshado kala duwan
The 5083 xaashida aluminium iyo saxan ayaa laga faa'iidaystaa warshadaha kala duwan iyadoo ay ugu wacan tahay sifooyinkooda wanaagsan. Halkan waxaa ah soo koobida codsiyadooda:
- Warshadaha badda: Sababtoo ah iska caabin badan oo ay u leedahay daxalka biyaha badda, 5083 aluminiumku wuxuu ku habboon yahay in la dhiso godadka markabka, sagxadaha, iyo dhismayaasha kale ee badda.
- Warshadaha hawada sare: Saamiga xoogeeda-sare ee culeyska iyo iska caabbinta daxalka ayaa ka dhigaya mid ku habboon qaababka diyaaradaha sida maqaarka baalasha, muraayadaha fiyuuska, iyo bulkheads.
- Warshadaha baabuurta: Daawaha waxa loo isticmaalaa muraayadaha jidhka ee fudud iyo qaybaha qaab dhismeedka baabuurta, ka qaybqaadanaya horumarinta hufnaanta shidaalka iyo maaraynta.
- Dhismaha: Waxaa loo adeegsadaa codsiyada u baahan xoog badan, wax u adkaysta daxalka, sida qalabka taangiyada, qaybaha korontada, iyo weelasha cadaadiska.
- Gaadiidka Tareennada: Adkeysigeeda iyo iska caabbinta daxalka ayaa ka dhigaya mid ku habboon codsiyada gaadiidka tareenka.
- Qalab Ciidan: Awoodda daxalka ee xoogga iyo iska caabbinta daxalka waxaa lagu qiimeeyaa soo saarista qalabka militariga.
Codsiyadan ayaa ka faa'iideysanaya 5083 qaabaynta aluminium, weldability, iyo mashiinada, taas oo ka dhigaysa doorasho wax ku ool ah codsiyo dhismeedyo badan oo dalbanaya. Haddii aad u baahan tahay macluumaad faahfaahsan ama aad qabto su'aalo gaar ah, xor u tahay inaad waydiiso!
Halkee laga helaa Tayada Sare 5083 Xaashida aluminiumka & Saxan–Huasheng aluminium
Huasheng Aluminium waa soo saaraha aluminium iyo alaab-qeybiye caan ah oo ku saleysan Shiinaha. Waxay ku takhasusaan soo saarista iyo bixinta alaabooyinka aluminium tayo sare leh, oo ay ku jiraan 5083 aluminium xaashi iyo saxan. Huasheng Aluminium waxaa lagu yaqaanaa tas-hiilaadkeeda wax-soo-saarka horumarsan, tallaabooyinka xakamaynta tayada adag, iyo u hoggaansanaanta heerarka caalamiga ah.
Waxaad ka heli kartaa tayo sare leh 5083 xaashida aluminium iyo saxan laga soo bilaabo Huasheng Aluminium iyada oo loo marayo waddooyinka soo socda:
Iibka Tooska ah:
- Si toos ah ula xiriir Huasheng Aluminium iyada oo loo marayo shabakadooda rasmiga ah ama macluumaadka xiriirka si aad wax uga weydiiso wax soo saarkooda, tilmaamo, qiimaha, iyo habka dalbashada.
- Huasheng Aluminium waxa laga yaabaa inay lahaato koox iib ah oo u go'an ama wakiilo adeegga macaamiisha ah kuwaas oo kaa caawin kara su'aalahaaga oo fududayn kara habka iibka.
Bandhigyada Ganacsiga iyo Bandhigyada:
- Ka qaybgal bandhigyada ganacsiga warshadaha aluminium, bandhigyo, iyo shirarka ay Huasheng Aluminium ku soo bandhigto alaabteeda. Dhacdooyinkani waxay bixiyaan fursado lagu isku xidho wakiilada shirkadda, baro wax soo saarkooda, lagana wadahadlo iskaashiga suurtagalka ah.
Kahor inta aan laga soo saarin Huasheng Aluminium ama alaab-qeybiye kasta, Hubi inaad gudbiso shuruudahaaga gaarka ah, oo ay ku jiraan sifooyinka alaabta, cabbirrada, tiro, waqtiyada gaarsiinta, iyo heerarka tayada. Codso shahaadooyinka alaabta, warbixinnada tijaabada, iyo muunado si loo xaqiijiyo tayada alaabta iyo ku haboonaanta codsigaaga.
