Chemical Composition of 5083 Aluminium Sheet & Plate
(Al) |
92.4 – 95.6 % |
(Mg) |
4.0 – 4.9 % |
(Mn) |
0.40 – 1.0 % |
(Cr) |
0.05 – 0.25 % |
(Cu) |
<= 0.10 % |
(Fe) |
<= 0.40 % |
(Si) |
<= 0.40 % |
(Zn) |
<= 0.25 % |
(Ti) |
<= 0.15 % |
Others |
<= 0.05 % for each, <= 0.15 % for total |
5083 Aluminium Sheet & Plate Processing Performance
The 5083 aluminum plate stands as a preferred material in industries such as shipbuilding, aerospace, automotive, and machinery manufacturing, thanks to its superior qualities including high strength, excellent corrosion resistance, and remarkable weldability. Its performance during processing is characterized by several advantageous properties:
- Machinability: It exhibits commendable machinability, allowing for a variety of conventional processing techniques to be applied efficiently. This includes operations like milling, stamping, stretching, deep drawing, and bending, among others.
- Weldability: The 5083 aluminum plate showcases excellent weldability, accommodating various welding methods such as TIG (Tungsten Inert Gas), MIG (Metal Inert Gas), and resistance welding. Additionally, it is also suitable for more specialized welding processes like explosive welding and electroslag welding, under certain conditions.
- Formability: This material is noted for its excellent formability, capable of being shaped effectively through both cold working and hot working methods, catering to diverse manufacturing requirements.
- Cutting Performance: When it comes to cutting, the 5083 aluminum plate performs exceptionally well. It is characterized by slow tool wear and minimal cutting force requirements, which together contribute to enhanced processing efficiency. This attribute makes it an even more attractive choice for applications demanding precise and efficient material processing.
Mechanical Properties of 5083 Aluminium Plate
Below is a table that outlines the typical mechanical properties for 5083 aluminium sheet and plate in a commonly used temper, such as H116 or H321, which are often used in marine environments due to their excellent corrosion resistance.
Take Aluminum 5083-H112 as an example:
Property |
Unit |
Value |
Tensile Strength |
MPa |
300 |
Yield Strength (0.2% Offset) |
MPa |
190 MPa |
Elongation (in 50mm) |
% |
>= 12 |
Brinell Hardness |
HB |
81 |
Density |
g/cm³ |
2.66 |
Thermal Conductivity |
W/m·K |
117 |
Electrical Conductivity (% IACS) |
% |
29 |
Note:For more information about other Temper 5083 alloys, please visit 5083 Aluminum
These properties make 5083 aluminium sheet and plate highly sought after for demanding applications in marine, aerospace, automotive, and other industrial sectors where both strength and resistance to corrosion are critical.
5083 Aluminium Sheet & Plate Sizes
Customizable 5083 Aluminium Sheet & Plate Specifications
The 5083 aluminium sheet & plate offers versatile customization options to meet the specific requirements of both manufacturers and customers. Tailored dimensions ensure optimal application suitability.
Available Size Ranges:
- Thickness: 0.2mm to 200mm
- Width: 100mm to 2650mm
- Length: 500mm to 16000mm
Note: The final size is determined based on the unique needs of each application.
Typical Thickness for 5052 Aluminium Sheet & Plate:
Alloy Temper |
Thickness (mm) |
Width (mm) |
Length (mm) |
5083 H32 |
4 |
1500 |
3500 |
5083 H32 |
1.5 |
1313 |
821 |
5083 H32 |
1.5 |
840 |
1360 |
5083 H32 |
1.5 |
840 |
1830 |
5083 H32 |
2 |
921 |
744 |
5083 H112 |
80 |
640 |
640 |
5083 O |
1.4 |
1500 |
3000 |
5083 O |
1.9 |
1500 |
3000 |
5083 Aluminium Sheet & Plate Thickness Tolerance
The thickness tolerance of the 5083 aluminum plate is determined by specific production standards and requirements. Below is a table of common thickness tolerances for this material:
Standard |
Thickness |
Tolerance |
ASTM B209 |
< 6.35mm |
±0.05mm |
|
6.35-25.4mm |
±0.08mm |
|
> 25.4mm |
±0.13mm |
EN 485-3 |
< 6mm |
±0.05mm or ±5% |
|
6-12mm |
±0.1mm or ±5% |
|
> 12mm |
±0.2mm or ±5% |
GB/T 3880 |
< 6mm |
±0.1mm |
|
6-12mm |
±0.15mm |
|
> 12mm |
±0.2mm |
Note: The tolerances listed above are indicative and should be confirmed according to the actual production standards and requirements.
Differences Between EN 485-2 and EN 485-3:
- EN 485-2 is applicable to general uses.
- EN 485-3 is specific to aerospace applications and has stricter requirements on chemical composition, mechanical properties, dimensions, heat treatment process, and surface quality.
Surface Quality of 5083 Aluminium Sheet & Plate
Surface Quality of 5083 Aluminium Sheet & Plate
Quality Aspect |
Description |
Flatness |
The surface is flat, free from warping, protrusions, depressions, or other deformations. |
Color |
The surface is smooth, uniform, and consistent in color, without oxide scales, cracks, water ripples, or other defects. |
Cleanliness |
The surface is clean, with no oil, dust, dirt, or other impurities present. |
Oxide Layer |
A uniform and dense oxide layer is present on the surface. |
This table format succinctly conveys the key aspects of the surface quality for the 5083 aluminium sheet & plate.
5083 Aluminium Sheet & Plate for Sale
Grade |
Description |
Performance |
Application |
5083-0 |
Softened aluminum alloy plate after annealing. |
Good formability and processing performance, suitable for stamping, stretching, and deep drawing. |
Used in scenarios requiring high plasticity and processing performance, like tanks, ships, and automotive panels. |
5083 H111 |
Aluminum plate with improved hardness and strength due to work hardening and natural aging treatments. |
Exhibits good strength and corrosion resistance, ideal for applications needing higher strength and corrosion resistance. |
Commonly used in environments requiring enhanced strength and corrosion resistance, such as hulls, decks, and ship structural parts. Suitable for machining and welding tasks. |
5083 H112 |
Quenched aluminum alloy plate with high strength and hardness but limited plasticity. |
Provides high strength and corrosion resistance, typically used in scenarios demanding higher strength and corrosion resistance. |
Utilized in environments requiring higher strength and corrosion resistance, such as hulls, decks, and ship structural parts. |
5083-H116 |
Aluminum alloy plate quenched, stretched, and stabilized, offering good corrosion resistance and weldability. |
Despite lower strength and hardness after cooling treatment, maintains high tensile and flexural strength. |
Commonly used in shipbuilding, marine engineering, railway vehicles, military equipment, and other fields due to excellent performance and reliability, despite the higher cost. |
5083-H321 |
Aluminum sheet with enhanced flatness, weldability, and corrosion resistance due to stretching and flattening treatments. |
Provides good flatness, weldability, and corrosion resistance, suitable for applications requiring high strength and corrosion resistance. |
Ideal for high-speed ships, tugboats, oil tankers, etc., needing high strength, corrosion resistance, flatness, and surface quality. |
Factors to Consider When Choosing 5083 Aluminum Sheet & Plate
Heat Treatment State |
Property |
Application |
5083 O |
Higher plasticity and deep drawing performance |
Suitable for applications requiring high plasticity and deep drawing, such as tanks and automotive panels. |
5083 H111 |
Higher strength and corrosion resistance |
Ideal for structural parts that require strength and resistance to corrosion, like hulls and decks. |
5083 H112 |
Higher strength and hardness |
Used in applications where high strength and hardness are necessary, such as ship structural parts. |
5083 H116 |
Better corrosion resistance and weldability |
Often chosen for shipbuilding and marine engineering due to its weldability and resistance to corrosion. |
5083 H321 |
Better flatness and surface quality |
Preferred for high-speed ships, tugboats, oil tankers, where high flatness and surface quality are critical. |
This table provides a quick reference to the different heat treatment states of 5083 aluminum alloy and their recommended applications based on the required properties. If you have any more questions or need further assistance, feel free to ask!
Applications of 5083 Aluminium Sheet & Plate in Various Industries
The 5083 aluminium sheet and plate are utilized across various industries due to their excellent properties. Here’s a summary of their applications:
- Marine Industry: Due to its high resistance to corrosion from seawater, 5083 aluminium is ideal for constructing ship hulls, decks, and other marine structures.
- Aerospace Industry: Its high strength-to-weight ratio and corrosion resistance make it suitable for aircraft structures like wing skins, fuselage panels, and bulkheads.
- Automotive Industry: The alloy is used for lightweight body panels and structural components in vehicles, contributing to improved fuel efficiency and handling.
- Construction: It’s used in applications that require a strong, corrosion-resistant material, such as tank fittings, electrical components, and pressure vessels.
- Railway Vehicles: Its durability and resistance to corrosion make it suitable for railway vehicle applications.
- Military Equipment: The alloy’s strength and corrosion resistance are valued for military equipment manufacturing.
These applications take advantage of 5083 aluminum’s formability, weldability, and machinability, making it a versatile choice for many demanding structural applications. If you need more detailed information or have specific questions, feel free to ask!
Where to Source High-Quality 5083 Aluminum Sheet & Plate–Huasheng aluminum
Huasheng Aluminum is a well-known aluminum manufacturer and supplier based in China. They specialize in producing and supplying high-quality aluminium products, including 5083 aluminuim sheet and plate. Huasheng Aluminum is known for its advanced production facilities, stringent quality control measures, and adherence to international standards.
You can source high-quality 5083 aluminum sheet and plate from Huasheng Aluminum through the following avenues:
Direct Purchase:
- Contact Huasheng Aluminum directly through their official website or contact information to inquire about their product offerings, specifications, pricing, and ordering process.
- Huasheng Aluminum may have a dedicated sales team or customer service representatives who can assist you with your inquiries and facilitate the purchase process.
Trade Shows and Exhibitions:
- Attend aluminum industry trade shows, exhibitions, and conferences where Huasheng Aluminum exhibits its products. These events provide opportunities to network with the company’s representatives, learn about their products, and discuss potential partnerships.
Before sourcing from Huasheng Aluminum or any supplier, ensure that you communicate your specific requirements, including product specifications, dimensions, quantity, delivery timelines, and quality standards. Request material certifications, test reports, and samples to verify the product’s quality and suitability for your application.