Nabata na Huasheng Aluminom, ụlọ ọrụ gị tụkwasịrị obi na onye na-ere ahịa maka ịdị mma dị elu 5005 aluminom mpempe akwụkwọ efere. Nkwenye anyị maka ịdị mma na-eme ka a hụ na ngwaahịa anyị ruru ụkpụrụ ụlọ ọrụ, na-enye arụmọrụ kwụsiri ike na ịdị mma na-agbanwe agbanwe maka ọtụtụ ngwa ngwa. N'okpuru, anyị na-enyocha atụmatụ, nkọwa, n'ibu Njirimara, ngwa ngwa, na ntụnyere nke 5005 Aluminom mpempe akwụkwọ efere na ndị ọzọ yiri alloys.
Nchịkọta nke 5005 Aluminom Alloy
5005 aluminom alloy bụ akụkụ nke usoro 5xxx, mara maka nnukwu magnesium ọdịnaya. Ọ dị n'ụdị dị iche iche, gụnyere mpempe akwụkwọ, eriri igwe, na efere, enwere ike weta ya na iwe dị iche iche dịka O, H32, H34, na H36. A maara alloy a maka oke nguzogide corrosion ya, weldability, na formability, na-eme ka ọ dị mma maka ọtụtụ ụlọ ọrụ.
Nkọwapụta
Ngwongwo |
Nkọwa |
Iwe |
O, H32, H34, H36 |
Ọkpụrụkpụ |
0.2mm – 500mm |
Obosara |
200mm – 3000mm |
Ogologo |
Ihe ruru 12000 mm |
Ọgwụgwọ elu |
Achachapụrụ, Ahịhịa, Anodized |
Ụkpụrụ |
ASTM B209, N'ime 485-2, N'ime 573-3, GB/T 3880.1-2012 |
Dakọtara |
UNS A95005, AA5005, A5005, HE A5005P, wdg. |
Ihe eji arụ ọrụ
The n'ibu Njirimara nke 5005 aluminium plate vary based on the temper.
Iwe |
Ike ọdụdọ (MPa) |
Mpụta Ike (MPa) |
Brinell Hardness (HB) |
Ogologo oge (%) |
O |
124 |
41.4 |
28 |
25 %
@Ọkpụrụkpụ 1.59 mm |
H32 |
138 |
117 |
36 |
11 %
@Ọkpụrụkpụ 1.59 mm |
H34 |
159 |
138 |
41 |
8.0 %
@Ọkpụrụkpụ 1.59 mm |
H36 |
179 |
165 |
46 |
6.0 %
@Ọkpụrụkpụ 1.59 mm |
H38 |
200 |
186 |
59 |
5.0 %
@Ọkpụrụkpụ 1.59 mm |
Ụdị na ngwa a na-ahụkarị
5005 O Aluminom Plate
- Atụmatụ: Steeti kacha dị nro, ike dị ala, elu ductility, ezi formability.
- Ngwa: Ihe owuwu, eletriki, n'ichepụta n'ozuzu, ngwa nri, akụrụngwa kemịkalụ, ngwa ụlọ.
5005 H32 Aluminom efere
- Atụmatụ: Nkwụsi ike nke eriri, ike na-agafeghị oke, ezi formability.
- Ngwa: Ihe owuwu, eletriki, ụgbọ ala, ọkụ, kichin kichin.
5005 H34 Aluminom efere
- Atụmatụ: Ike dị elu, ezi formability, magburu onwe corrosion eguzogide.
- Ngwa: Mmiri mmiri, ụlọ, ihe owuwu, ụgbọ mmiri, akụrụngwa kemịkalụ, ime akara, ụlọ elu.
5005 H36 Aluminom efere
- Atụmatụ: Ike kacha elu na nguzogide corrosion, ezi formability.
- Ngwa: Mmiri mmiri, ụlọ, ihe owuwu, ụgbọ mmiri, akụrụngwa kemịkalụ, ụlọ elu.
Anodized 5005 Aluminom efere
Anodizing na-eme ka ịdịte aka, ọdịdị, na nguzogide corrosion, na-enye agba dị iche iche na nhọrọ imecha. A na-eji ya eme ihe:
- Ihe owuwu: Facades ụlọ, ime ime.
- Ụgbọ njem: Ụgbọala, ikuku ikuku.
- Nkwakọ ngwaahịa: Ihe oriri na ihe ọṅụṅụ.
Ngwa nke 5005 Aluminom efere
Ngwa ịchọ mma
5005 aluminom na-ewu ewu n'ime ụlọ na ihe owuwu maka ụlọ, mgbidi mgbidi, na mpio windo n'ihi ịdị arọ ya, ike dị elu, na ezigbo nguzogide corrosion.
Ụlọ ọrụ ụgbọ ala
A na-eji ya eme ihe maka akụkụ ahụ na akụkụ engine, 5005 na-enye ike dị elu na nguzogide corrosion mgbe ọ dị fechaa, ime ka mmanụ ọkụ na-arụ ọrụ nke ọma na ibelata ihe ọkụkụ.
Ụlọ ọrụ mmiri
Kwesịrị ekwesị maka ịrụ ụgbọ mmiri, 5005 aluminum na-enye ezigbo nguzogide corrosion mmiri nnu, ike dị elu, na mfe formability.
Nrụpụta n'ozuzu
5005 a na-eji na nkwakọ ngwaahịa nri, ndị na-ekpo ọkụ, na kemịkalụ nhazi akụrụngwa n'ihi na ya ezi formability na weldability.
Ngwa eletriki
Ya mma eletriki conductivity na corrosion eguzogide ime 5005 adabara maka ihe ntụgharị na ihe ndị na-agbanwe agbanwe.
Ngwakọta kemịkalụ
Ihe |
Ọdịnaya (%) |
Aluminom (Al) |
<= 97 |
Magnesium (Mg) |
0.5 – 1.1 |
Ígwè (Fe) |
0.0 – 0.7 |
Silikoni (Na) |
0.0 – 0.3 |
Ọla kọpa (Ku) |
0.0 – 0.2 |
Zinc (Zn) |
0.0 – 0.25 |
Manganese (Mn) |
0.0 – 0.2 |
Chromium (Cr) |
0.0 – 0.1 |
Ihe ndị ọzọ |
≤0.05% nke ọ bụla, ≤0.15% ngụkọta |
5005 vs. 5052 Aluminom efere
Ha abụọ 5005 na 5052 aluminum alloys na-enye ike dị mma, formability, na nguzogide corrosion, ma dị iche na ụfọdụ isi akụkụ.
Ngwongwo |
5005 Aluminom |
5052 Aluminom |
Ọdịnaya Magnesium |
0.5%-1.1% |
2.2%-2.8% |
Ike |
Ala |
Nke ka elu |
Nguzogide corrosion |
Ọ dị mma, ma obere karịa 5052 |
Magburu onwe, karịsịa na mmiri nnu |
Formability |
Mma, mfe na-ehulata na-etolite |
Ọ dị mma, ma obere karịa 5005 |
Weldability |
Ọ dị mfe ịgbado ọkụ |
Ezi weldability |
Ngwa a na-ahụkarị |
Ihe owuwu, ụgbọ ala, ngwa |
Mmiri mmiri, njem njem, imepụta mpempe akwụkwọ |