| Alloy | 3005 |
| Khalefo | O、H12、H14、H16、H18 、H22、H24、H26、H28 |
| Botenya | 0.4-6.35mm |
| Bophara | 600-1524mm |
| Bolelele | 400-6096mm |
Rea u amohela ho Huasheng Aluminium, mohloli oa hau oa pele oa boleng bo holimo 3005 aluminium lakane le lihlahisoa tsa poleiti. Leqephe la rona la webo le felletseng le etselitsoe ho fana ka kutloisiso e tebileng ea litaba tsena tse fapaneng, lits'ebetso tsa eona, le tshebetso e hlokolosi ya tlhahiso e netefatsang hore dihlahiswa tsa rona di fihlella maemo a phahameng ka ho fetisisa a indasteri.
The 3005 poleiti ea aluminium e khetholloa ke khanyetso ea eona e ikhethang ea kutu, e leng letšoao la li-alloys tsa aluminium tsa 3xxx. Mona ke sebopeho se tloaelehileng sa lik'hemik'hale:
| Element | Peresente |
| Aluminium (Al) | 95.7 – 98.8 % |
| Chromium, Kr | <= 0.10 % |
| Manganese (Mong) | 1.0 – 1.5 % |
| Magnesium (Mg) | 0.20 – 0.60 % |
| Tšepe (Fe) | <= 0.70 % |
| Koporo (Cu) | <= 0.30 % |
| Zinki (Zn) | <= 0.25 % |
| Titanium (Ea) | <= 0.10 % |
| Silicone, Le | <= 0.60 % |
| Lintlha tse ling | 0.05% enngwe le enngwe, 0.15% kakaretso |
Thepa ea mechine ea 3005 lipoleiti tsa aluminium li etselitsoe ho fihlela litlhoko tsa lits'ebetso tse fapaneng:
Take Aluminum 3005-H14 as an example
| Thepa | Boleng |
| Matla a tšepe | 180 MPa(26100 psi) |
| Kotulo Matla | 165 MPa(23900 psi) |
| Elongation | 7 % |
| Ho thatafala | 49 HB (Ho thatafala ha Brinell) |
| Modulus ea Elasticity | 69 GPA(10000 ksi) |
3005 poleiti ea aluminium e tsebahala ka khanyetso ea eona e makatsang ho kutu ka kakaretso ea sepakapaka le metsi a letsoai, ho etsa hore e lokele ho sebedisoa dibakeng tse thata.
Sebopeho se phahameng sa alloy ena se lumella hore se bōpehe habonolo, kobehile, le tse entsoeng, e bohlokoa bakeng sa liindasteri tse kang tsa makoloi, moaho, le ho paka.
The 3005 Ho cheseha ha poleiti ea aluminium ho etsa hore e be khetho e ratoang bakeng sa ho aha meaho e bobebe, ka tumellano bakeng sa mekhoa e fapaneng ea tjheseletsa.
Bokaholimo bo boreleli ba 3005 lipoleiti tsa aluminium li ka phethoa ka litsela tse sa tšoaneng, ho kenyelletsa anodizing, ho penta, le ho roala phofo, ho ntlafatsa boipiletso ba bona ba botle.
| Molemo | Tlhaloso |
| Khanyetso ea Corrosion | E ikhethang bakeng sa lits'ebetso tsa kantle le tsa metsing. |
| E bobebe | E kenya letsoho ho sebetsa hantle ha mafura le ho sebetsa habonolo. |
| Formability | E loketse ho theha libopeho tse rarahaneng le li-profiles. |
| Weldability | E fana ka ho feto-fetoha ha mekhoa ea tlhahiso. |
| Recyclability | Khetho ea thepa ea eco-friendly. |
| Motlakase Conductivity | E loketse lits'ebetso tsa indasteri ea elektroniki. |
| Bothata | Tlhaloso |
| Matla a Tlase | E kanna ea se be molemong oa ts'ebeliso e boima ea sebopeho. |
| Litšenyehelo | E ka ba theko e boima ho feta lisebelisoa tse ling tse kang tšepe. |
| Indasteri | Kopo | Tlhaloso |
| Tsa makoloi | Liphanele tsa 'mele, Likaroloana | E sebelisoa haholo bakeng sa ho etsa liphanele tsa 'mele oa likoloi le likarolo tse rarahaneng ka lebaka la ho kopana ha eona ho bobebe le ho hanyetsa kutu.. |
| Sephutheloana sa Lijo le Seno | Can Lids, 'Mele | E sebelisoa haholo ho etsa makotikoti a lino-mapholi le 'mele ea lijo, ho matlafatsa bokhoni ba eona ba ho hanela ho bola le ho boloka polokeho le bots'epehi ba lihlahisoa tse pakiloeng. |
| Kaho le Kaho | Ho rulela, Siding, Litsamaiso tsa Cladding | E sebelisoa mohahong le mohahong bakeng sa likopo tse kang ho rulela, lehlakore, le litsamaiso tse ling tsa ka ntle tsa ho roala ka lebaka la ho hanyetsa ho bola ha eona, ho etsa bonnete ba hore lisebelisoa li boloka ponahalo ea tsona le botšepehi ba sebopeho. |
| Marine | Boat Hulls, Likarolo tsa Kaho ea Likepe | E hiriloe indastering ea likepe bakeng sa likepe tsa likepe, likarolo tsa kaho ea likepe, le lisebelisoa tse fapaneng tsa metsing, e ruisang molemo ka ho itoanela ho hong ha metsi a letsoai le ho ba bobebe. |
| Tsa elektroniki | Sesebelisoa sa Elektronike Casing | E sebelisoa ha ho etsoa li-casings tsa lisebelisoa tsa elektroniki, ho sebelisa monyetla oa ho tsamaisa motlakase o motle oa alloy, thepa e bobebe, le khanyetso ea kutu. |
| Matla a Letsatsi | Liforeimi tsa Solar Panel, Mounting Systems | E sebelisoa haholo indastering ea matla a letsatsi bakeng sa ho etsa liforeimi tsa matla a letsatsi le litsamaiso tse ntseng li eketseha, moo tlhaho ea eona e bobebe e thusang ho fokotsa boima ba kakaretso ea lisebelisoa tsa letsatsi. |
| Mokhabiso le Mehaho | Ho Haha Lifahase, Letshwao, Moqapi oa ka Hare-hare | E sebelisetsoa merero ea ho khabisa le ea ho haha, joalo ka ho haha facade, seka, le likarolo tsa moralo oa ka hare, ka lebaka la pheletso ea eona e boreleli le bokhoni ba ho tšoara pente le liphahlo. |
| Lisebelisoa tsa ka Lapeng | Likaroloana le Bolulo | Hangata e sebelisoa ka lisebelisoa tsa ntlo joaloka lihatsetsi, lionto, le li-air conditioner bakeng sa likarolo tse sa tšoaneng le matlo, ho kenya letsoho ho tšoarelleng le ponahalong ea lisebelisoa tsena. |
| Mohato | Tlhaloso |
| Aluminium Ingot Casting | Ts'ebetso e qala ka ho lahla li-ingots tsa aluminium, ho kenyelletsa ho qhibiliha motsoako ka likarolo tse itseng tsa likarolo ebe o li tšela ka har'a hlobo bakeng sa ho tiisa.. |
| Hot Rolling | Joale li-ingots li chesoa ka ho chesa hore e be lihlahisoa tse seng li felile, ho fokotsa botenya ha o ntse o eketsa bolelele le bophara ka letoto la liloala tse bilikang. |
| Cold Rolling | Ho latela ho bilika ho chesang, lipoleiti tsa aluminium li ntse li phutholoha ka mokhoa o batang ho ntlafatsa lisebelisoa, ho finyella litekanyo tsa ho qetela le ho ntlafatsa boleng ba holimo le thepa ea mechine. |
| Anealing | Ho imolla khatello ea maikutlo e setseng le ho ntlafatsa sebopeho, lipampiri tsa aluminium li kenngoa ts'ebetsong ea annealing, e kenyeletsang ho futhumala ho laoloang le ho tsidifala butle-butle. |
| Ho reha le ho Seha | The rolled and annealed lipampiri tsa aluminium are then cut to the desired size and shape using specialized machinery. |
| Phekolo ea Bokaholimo | Ho itšetlehile ka kopo, the 3005 Lipampiri tsa aluminium li ka 'na tsa phekoloa holimo joaloka anodizing, ho penta, kapa ho roala phofo ho fihlela sephetho se hlokahalang. |
| Taolo ea Boleng | Mehato e matla ea taolo ea boleng, ho kenyelletsa tlhahlobo ea mochini, tlhahlobo ea lik'hemik'hale, le licheke tsa boleng bo holimo, li kenngoa ts'ebetsong ho netefatsa hore lihlahisoa li finyella litekanyetso tse boletsoeng. |
| Ho paka le ho Romela | Lihlahisoa tsa ho qetela li phuthetsoe bakeng sa tšireletso 'me li romelloa ho bareki kapa barekisi, e loketse bakeng sa tshebediso e nngwe. |
1. Selelekela 3003 aluminium……
1. Selelekela Joalo ka indasteri……
Selelekela Lefatšeng la……
8011 H18 blister aluminium fo ……
Selelekela ho 1050 Epoxy C……
1. Selelekela 8011 Embosse……
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
