| Kandelna (mm) | 0.2 – 6 |
| Lebar (mm) | 500 – 2800 |
| Panjangna (mm) | 1000 – 12000 |
| Pilihan Perlakuan Surface | Ngagiling Finish, Dipoles, Disikat, jsb. |
3004 Aluminium mangrupakeun alloy dipikawanoh pikeun kakuatan alus teuing, kabentukna, sarta lalawanan korosi. Hal ieu loba dipaké dina sagala rupa industri alatan sipat ieu sarta versatility na dina aplikasi béda.
3004 Aluminium ilaharna ngandung ngeunaan 1% mangan jeung 1% magnésium, ningkatkeun kakuatan sarta lalawanan korosi. Éta langkung kuat tibatan 3003 alloy tapi boga ductility handap.
| unsur | Rentang perséntase |
| alumunium | 95.5-98.2% |
| Magnésium (Mg) | 0.8-1.3% |
| Mangan (Bungbulang) | 1.0-1.5% |
| Kromium (Cr) | 0.05-0.25% |
| Beusi (Fe) | max 0.7% |
| Silikon (Jeung) | max 0.3% |
| Tambaga (Cu) | max 0.25% |
| Séng (Zn) | max 0.25% |
| titanium (Tina) | max 0.15% |
| elemen séjén | max 0.05% |
| Sebutan Watek | Katerangan |
| H19 | Galur hardened jeung sawaréh annealed |
| H18 | Galur hardened tur pinuh annealed |
| O | kaayaan Annealed |
Méja Dimensi
| Kandelna (mm) | Lebar (mm) | Panjangna (mm) | Pilihan Perlakuan Surface |
| 0.2 – 6 | 500 – 2800 | 1000 – 12000 | Ngagiling Finish, Dipoles, Disikat, jsb. |
| Ukuran (Kaisar) | Ukuran (métrik) |
| 4×8 | 1000 x 2000 mm |
| 4×10 | 1250mm x 2500 mm |
| 48×96 | 1220×2440 |
| … | … |
3004 Lambaran Aluminium Plate dipaké dina:
3004 alumunium is ideal for beverage cans due to its high strength, kabentukna, sarta recyclability.
Can bungkusan Kauntungannana Table
| Kaunggulan | Katerangan |
| Kakuatan Luhur | Daya tahan dina produksi kaléng |
| Extension Tinggi | Formability pikeun wangun kompléks |
| Daur ulang | Ramah lingkungan |
3004 Lempeng Lambaran Aluminium is used in exterior decoration due to its strength and corrosion resistance.
Dipaké dina manufaktur bagian anu merlukeun duanana kakuatan sarta lalawanan ka korosi.
| Harta | Nilai |
| Kapadetan | 2.72 g/cm³(0.0983 lb/in³) |
| Kakuatan regangan | >= 160 MPa @Thickness 6.35 – 76.2 mm |
| Kakuatan ngahasilkeun | >= 62.0 MPa @Thickness 6.35 – 76.2 mm |
| Modulus élastisitas | 70 GPa |
| Babandingan Poisson | <= 0.35 |
| Elongation di Break | 7.0 % @Katebalan 6.35 – 76.2 mm |
Catetan: data source.
Komposisi jeung Pasipatan Babandingan Table
| Fitur | 3004 alumunium | 3003 alumunium |
| Komposisi (Mn%) | 1.0 – 1.5 | 1.0 – 1.5 |
| Komposisi (Mg%) | 0.8 – 1.3 | – |
| Formability | Rada hadé | Kacida wangunna |
| Résistansi korosi | Hadé dina cai asin | Alus |
| Kakuatan | Leuwih luhur | Handapeun |
3004 Aluminium digulung panas, bari 3003 tiasa tuang sareng digulung panas. 3004 dipaké pikeun kaléng inuman, facades wangunan, jeung tanghi gudang, padahal 3003 dipaké pikeun cookers, exchangers panas, sarta panels hateup.
Bubuka Di Huawei Alumi.
Bubuka Di Huasheng Alu…
Wilujeng sumping di HuaSheng Aluminium ……
Di HuaSheng Aluminium, urang pri……
Wilujeng sumping di Huasheng Aluminium…
Wilujeng sumping di HuaSheng Aluminium ……
Henan Huasheng Aluminium Co., Ltd (HHALU pondokna), ngadeg di 2001, perenahna di Kota Huiguo, ibukota Aluminium kawentar Propinsi Henan, Ieu produsén profésional sarta kalibet dina panalungtikan, pangwangunan, produksi, jualan na jasa tina plat lambar aluminium, coil aluminium, aluminium foil, strip aluminium sarta bunderan aluminium.
Salaku tambahan, HHALU ogé ngajual plat aluminium pikeun konstruksi jeung kapal, plat eunteung aluminium, jeung plat alloy aluminium otomotif.
No.53, Jalan Dongming, Zhengzhou, Henan, Cina
Copyright © Huasheng Aluminium 2023. Sadaya hak disimpen.
