| Alloy | 3003 |
| Haushi | O, H14 |
| Tsawon Diamita (mm) | 100-1400 mm |
| Rage Kauri (mm) | 0.2-10 mm |
| Aikace-aikace | Matsi mai dafa abinci |
3003 aluminum da'irar don matsa lamba wani sarari madauwari da aka ƙera ta musamman wanda ke aiki azaman tushen kayan don kera jikin mai dafa abinci da layukan ciki..
Kamar yadda masu dafa matsi suna aiki ƙarƙashin matsi na ciki (yawanci 0.7-1.0 bar sama da matsa lamba na yanayi) da yanayin zafi mai yawa (har zuwa 120°C), Dole ne kayan tushe su mallaki ƙarfi na musamman, thermal watsin, da mutuncin tsarin.
3003 aluminum gami, tare da abun ciki na manganese 1.0-1.5% , isar da mafi kyau duka ma'auni na inji ƙarfi (karfin jurewa 150-180 MPa a cikin H14), tsari (elongation ≥8% a cikin H14), da juriya na lalata, sanya shi kayan da aka fi so don masana'anta mai dafa abinci.
Da'irar aluminium tana aiki azaman farawa don zurfafa zanen jikin tukunyar da babu sumul - ƙira mai mahimmanci don jure matsin lamba na ciki ba tare da yabo ba..
Wannan ingantaccen bincike yana bincika abubuwan da ke tattare da ƙarfe, inji Properties, masana'antu, bukatun aikace-aikace, da kwatankwacin fa'idodi, samar da tabbataccen magana ga masana'antun dafa abinci matsa lamba, injiniyoyi masu inganci, da kuma siyan kwararru.
3003 Da'irar Aluminum don Mai dafa Matsi
3003 aluminum nasa ne da aluminum-manganese (Al-Mn) jerin gwanon da ba za a iya magance zafi ba.
Ana sarrafa kayan sa da farko ta hanyar aikin sanyi maimakon maganin zafi.
Ƙarin manganese yana ba da ƙarfafa ƙarfi-mafi ƙarfi, yin shi kusan 20% mai ƙarfi fiye da tsaftataccen aluminum na kasuwanci (1100 jerin) yayin da kiyaye kyakkyawan tsari.
A sinadaran abun da ke ciki na 3003 aluminum gami ana sarrafa ta sosai don tabbatar da daidaiton aiki:
| Abun ciki | Abun ciki (wt. %) | Aiki da Tasiri |
|---|---|---|
| Aluminum (Al) | Ma'auni | Yana samar da matrix alloy, tabbatar da asali plasticity da thermal conductivity |
| Manganese (Mn) | 1.0-1.5% | Abun ƙarfafa na farko; yana inganta ƙarfi, juriya lalata, da aikin zane mai zurfi |
| Iron (Fe) | ≤ 0.7% | Rashin tsabta; iyakantaccen adadin hatsi, wuce haddi yana rage filastik |
| Siliki (Kuma) | ≤ 0.6% | Rashin tsabta; kadan tasiri akan tsari, dole ne a sarrafa |
| Copper (Ku) | 0.05-0.20% | Ragowar kashi; wuce haddi yana rage juriya na lalata |
| Zinc (Zn) | ≤ 0.10% | Ragowar kashi tare da ƙaramin tasiri akan kaddarorin |
| Wasu (kowanne) | ≤ 0.05% | Hana illa ga aikin gami |
| Wasu (duka) | ≤ 0.15% | Yana tabbatar da daidaituwar abun ciki da kaddarorin barga |
Don aikace-aikacen dafa abinci matsa lamba, ana kayyade yawan zafin rai biyu na farko, dangane da buƙatun kafa da buƙatun ƙarfin ƙarshe:
| Haushi | Halaye | Ƙarfin Ƙarfi (MPa) | Tsawaitawa (%) | Aikace-aikace |
|---|---|---|---|---|
| Ya Haushi (Annealed) | Cikakken taushi, matsakaicin lalacewa | 110-140 | ≥20 | Zane mai zurfi mai matakai da yawa, hadaddun siffofi masu buƙatar nakasawa mai tsanani |
| H14 zafi (Rabin-wuya) | Taurare, daidaitattun kaddarorin | 150-180 | ≥8 | Daidaitaccen jikin injin dafa abinci-madaidaicin ma'auni na tsari da ƙarfin ƙarshe |
The H14 zafi an fi yin ƙayyadaddun matsi don masu dafa abinci, samar da isasshen tsari don aiwatar da zane mai zurfi yayin isar da ƙarfin injin da ake buƙata don ɗaukar matsa lamba a cikin samfurin ƙarshe.
Sauran abubuwan da ke akwai sun haɗa da H12, H16, H18, H22, H24, H26, da H32, wanda ke ba da ma'auni daban-daban na ƙarfi da ductility don aikace-aikace na musamman.
Da takamaiman kaddarorin na 3003 da'irar aluminum, musamman a cikin 'O’ fushi, suna da mahimmanci don aikace-aikacen cooker ɗin sa:
| Dukiya | Daraja (Ya Haushi) | Dace da Matsakaicin Cookers |
| Yawan yawa | ~ 2.73 g/cm³ | Mai nauyi, sauki rike, rage farashin jigilar kayayyaki. |
| Matsayin narkewa | ~ 630-655 ° C | Isasshen tsayi don jure yanayin dafa abinci (max ~ 121 ° C karkashin matsa lamba) ba tare da haɗari ba. |
| Thermal Conductivity | ~193 W/(m·K) | Madalla: M har ma da rarraba zafi, dafa abinci da sauri, makamashi yadda ya dace, yana hana wuraren zafi. |
| Coefficient na Thermal Expansion | ~ 23.2µm(m · ° C) | Mahimmanci don kwanciyar hankali mai girma yayin zagayowar dumama/ sanyaya. |
| Ƙarfin Ƙarfi | 110-140 MPa (16-20 ksi) | Isasshen ƙarfi don amintacce ya ƙunshi matsa lamba na ciki (misali, 15 psi aiki matsa lamba ne ~ 0.1 MPa). |
| Ƙarfin Haɓaka | 40-75 MPa (6-11 ksi) | Juriya ga nakasar dindindin a ƙarƙashin yanayin aiki na yau da kullun. |
| Tsawaitawa (% ku 50mm) | 20-30% | Kyakkyawan Formability: Yana ba da damar zane mai zurfi mai zurfi zuwa hadadden sifofin jikin mai dafa abinci ba tare da karaya ba. |
| Tauri (Brinell) | ~ 35 HB | Matsakaicin taushi, saukin kafa, amma zai iya zama mai saukin kamuwa da karce idan ba a yi masa magani ba. |
| Juriya na Lalata | Yayi kyau (yanayi, ruwa mai dadi) | Yana tsayayya da abinci gama gari da alkalis; gabaɗaya dace da hulɗar abinci, ko da yake ya kamata a kula da dogon lokaci tare da abinci mai acidic / alkaline. |
3003 An kera da'irorin aluminium don aikace-aikacen dafa abinci mai matsa lamba don ƙayyadaddun ƙayyadaddun bayanai don tabbatar da daidaiton ƙira da aikin samfur na ƙarshe:
| Siga | Na Musamman Range | Hakuri |
|---|---|---|
| Diamita | 200 - 500 mm (dangane da iya aiki) | ± 0.5 mm |
| Kauri | 2.0 - 4.0 mm (matsa lamba-ƙididdiga) | ± 0.05 - 0.10 mm |
| Girman Kauri | ≤ 0.03 mm a fadin diski | Yana tabbatar da kaurin bango iri ɗaya bayan zane |
| Fili | ≤ 2 mm da mita | Yana tabbatar da kwararar kayan da ta dace yayin samarwa |
| Surface m (Ra) | 0.2 - 0.8 μm | Yana shafar mannewa |
| Yanayin Edge | Burr-free, m | Babu tsagewa ko hawaye wanda zai iya haifar da lahani |
| Ƙarshen Sama | Mill gama | Tsaftace, mara mai, mara lahani |
Daidaitattun ƙayyadaddun bayanai suna samuwa a cikin kauri daga 0.50 mm ku 6.00 mm da diamita daga 100 mm ku 1200 mm, masu bin ka'idojin kasa da kasa ciki har da GB/T3880-2006, ASTM B209, da kuma 573.
3003 Ma'aunin Kaurin Da'irar Aluminum
Zaɓin na 3003 Aluminum da'irori don masana'anta mai dafa abinci yana haifar da fa'idodi da yawa masu tursasawa waɗanda ke magance buƙatun buƙatun aikace-aikacen jirgin ruwa..
Masu dafa abinci na matsa lamba suna buƙatar mara nauyi, jiki guda ɗaya don tabbatar da daidaiton tsari a ƙarƙashin matsin lamba. 3003 Aluminum yana da kyakkyawan tsari mai kyau:
The O fushi yana ba da elongation ≥20% , yin shi manufa domin hadaddun, ayyuka masu zurfi mai zurfi-mataki-mataki.
Masu dafa abinci dole ne su yi tsayin daka akai-akai ba tare da gazawa ba. 3003-H14 yana haifar da fushi:
| Bukatun Tsaro | Yaya 3003 Yana Magance Shi |
|---|---|
| Juriya na matsin lamba | Ƙarfin ƙarfi 150-180 MPa yana jure matsin lamba (0.7-1.0 bar) da gefen aminci |
| Margin matsa lamba | Yawanci ƙira don matsa lamba 3-5 × aiki |
| Cyclic matsa lamba gajiya | Kyakkyawan juriya na gajiya don dubban hawan hawan matsin lamba |
| Juriya na lalacewa | Yawan amfanin ƙasa 130-160 MPa yana hana kumburi a ƙarƙashin matsin lamba |
Ingantaccen dafa abinci ya dogara sosai akan canja wurin zafi. 3003 aluminum tayi:
3003 Da'irar aluminum don masu dafa abinci dole ne su dace da ƙa'idodin tuntuɓar abinci, ciki har da:
Tsarin oxide na halitta akan aluminium yana da kwanciyar hankali kuma mara amfani, hana mu'amala da abinci yayin dafa abinci.
Gwajin Girman Hatsi na Huawei Aluminum
Duk da yake ba mai jure lalata ba kamar bakin karfe, 3003 yana ba da isasshen kariya don aikace-aikacen dafa abinci mai matsa lamba:
3003 aluminum yana ba da ma'auni mafi kyau na aiki da farashi:
Don saduwa da tsauraran buƙatun kayan dafa abinci na matsa lamba, da masana'antu tsari na 3003 Dole ne a sarrafa da'irar gami da aluminium tam a kowane mataki.
Tafiyar masana'anta ta fara da ingots na aluminium masu tsafta (yawanci ≥99.7% Al).
Madaidaicin adadin manganese (1.0-1.5% ) ana ƙara su azaman abin haɗawa don cimma abubuwan da aka yi niyya. Mahimmin matakai sun haɗa da:
Tsarin mirgina a hankali yana rage kaurin aluminum ta matakai da yawa:
| Mataki | Bayani | Maɓalli Sarrafawa |
|---|---|---|
| Homogenization Annealing | Maganin zafi don kawar da rabuwa da damuwa na ciki | Daidaita yanayin zafi, lokacin jiƙa |
| Hot Rolling | Rushewar farko na simintin simintin gyare-gyare a yanayin zafi mai tsayi | Kula da yanayin zafi, ingancin surface |
| Cold Rolling | Rage kauri mai ci gaba a zafin jiki | Mirgine tsabta, rashin tausayi, mirgina mai |
| Matsakaici Annealing | Taimakon damuwa da sake recrystallization na hatsi (kamar yadda ake bukata) | Bayanin yanayin zafi, kula da yanayi |
| Gama Mirgina | Nasarar ma'aunin ƙarshe zuwa ƙayyadadden kauri | Gudu, tashin hankali, Binciken X-ray |
| Matsayi | Matsayin tashin hankali don inganta flatness | Tsarin mirgine, sarrafa tashin hankali |
DC (Chill Kai tsaye) zafi birgima abu an fi so don aikace-aikacen dafa abinci saboda kyakkyawan zane mai zurfi da halayen juyi.
Annealing magani ne mai mahimmanci na zafin jiki wanda ke ƙayyade zafin ƙarshe da tsari na da'irori:
| Siga | Ya Bayanin Haushi | H14 Ƙayyadaddun Zazzabi |
|---|---|---|
| Zazzabi mai zafi | 350-420°C | 250-350°C |
| Manufar | Cikakken recrystallization, matsakaicin lalacewa | Sashin ɓarna, daidaitattun kaddarorin |
| Sarrafa Girman Hatsi | M, iri iri (20-50 μm) | Tsarin hatsi mai sarrafawa |
| Yawan sanyi | Sannu a hankali, sarrafawa | Sarrafa don cimma fushin manufa |
Dangane da aikace-aikacen ƙarshe da buƙatun abokin ciniki, da'irori na iya samun jiyya a saman:
| Magani | Manufar | Aikace-aikace |
|---|---|---|
| Ragewa | Cire mirgina mai da gurɓatattun abubuwa | Duk da'irori kafin shiryawa |
| Chemical Polishing | Inganta haske saman | Kayan girki na Premium |
| Gyaran injina | Cimma ƙayyadadden ƙarewar farfajiya | Filayen bayyane |
| Anodizing | Mai wuya, m surface | Ingantattun karko da ƙayatarwa |
3003 Aluminum Circle Production
Blanking diski yana jujjuya takarda ko nada zuwa madauwari guda ɗaya ta hanyar yin tambari daidai:
Ma'aunin Tsari:
Babban madaidaicin blanking yana da mahimmanci don hana lahani na gefe da damuwa da damuwa wanda zai iya haifar da fashewa yayin zane mai zurfi.
Bayan yin komai, da'irori suna fuskantar gwajin ƙarshe kuma an shirya su don jigilar kaya.
Daidaitaccen marufi ya haɗa da jakar filastik kumfa a ciki, rubutun anti-danshi, suturar kwali, da pallets na katako don fitar da cancantar teku.
3003 Aluminum gami da'irori sami aikace-aikace mai yawa a cikin masana'anta mai dafa abinci, yin hidima a matsayin kayan tushe don abubuwa masu mahimmanci.
Babban aikace-aikacen yana cikin tukunyar gas da lantarki don amfanin gida. Waɗannan suna buƙatar:
Yawan kauri na masu dafa abinci na gida ya fito daga 1.2 mm ku 2.0 mm bayan kafa.
3003 Aluminum Circle Household Cooker
Manyan masu dafa abinci mai ƙarfi don gidajen abinci da buƙatun sabis na abinci:
3003 Hakanan ana amfani da da'irar aluminum a cikin aikace-aikace na musamman:
Bayan masu girki na gargajiya, 3003 Ana amfani da da'irar aluminum don:
A fagen kera injin dafa abinci, babban madadin kayan don 3003 aluminum gami da'irori sun hada da bakin karfe, 5052 aluminum gami, da tsantsar aluminum (1050/1060).
Teburin kwatanta madaidaicin mai zuwa yana haɗa dukkan maɓalli na maɓalli don taimakawa masana'antun su zaɓi mafi kyawun kayan don takamaiman buƙatun aikace-aikacen su..
| Girman Kwatancen | 3003 Aluminum | Bakin Karfe (304) | 5052 Aluminum | 1060 Aluminum |
|---|---|---|---|---|
| Ƙarfin Ƙarfi (MPa) | 150-180 (H14) | ≥515 | 170-210 | ≤95 (Ya fushi) |
| Ƙarfin Haɓaka (MPa) | 130-160 (H14) | ≥200 | 130-180 | 20-30 (Ya fushi) |
| Tsawaitawa (%) | ≥8 (H14) | ≤15 (wuya forming) | ≥18 (Ya fushi) | ≥25 (Ya fushi) |
| Zurfin Zane Tsari | Madalla | Talakawa | Yayi kyau | Madalla |
| Thermal Conductivity (W/m·K) | 190 | 15-16 | 170 | 235 |
| Yawan yawa (g/cm³) | 2.73 | 7.9-8.0 | 2.68 | 2.71 |
| Juriya na Lalata | Yayi kyau | Madalla | Madalla | Talakawa (mai yiwuwa ga oxidation) |
| Juriya | Yayi kyau | Madalla | Yayi kyau | Talakawa |
| Kayan aiki | Matsakaici-ƙananan | Babban (3-4× 3003) | Matsakaici-high (1.5-2× 3003) | Ƙananan |
| Kudin sarrafawa | Ƙananan | Babban | Matsakaici | Ƙananan |
| Dace Gabaɗaya don Masu dafa Matsi | Madalla | Yayi kyau | Yayi kyau | Talakawa |
| Amfanin Farko | Mafi kyawun ma'auni na tsari, ƙarfi, da tsada Kyakkyawan aikin thermal Mai nauyi (1/3 nauyin bakin karfe) |
Mafi girma ƙarfi Mafi girman juriya na lalata Siffar Premium |
Ƙarfi mafi girma fiye da 3003 Kyakkyawan juriya na lalata |
Mafi ƙarancin farashi Mafi girman tsari Mafi kyawun halayen thermal |
| Aikace-aikace na yau da kullun | Matakan dafa abinci matsa lamba na gida Matsalolin kasuwanci Kayan girki na yau da kullun |
Masu dafa abinci masu ƙarfi Muhalli na musamman masu lalata Layukan dafa abinci na Premium |
Tsakar- zuwa manyan masu dafa abinci mai ƙarfi Aikace-aikace masu buƙatar haɓaka juriya na lalata |
Kayan dafa abinci marasa matsi Abubuwan ado Aikace-aikace tare da ƙarancin buƙatun ƙarfin ƙarfi |
Ba za a iya yin sulhu ba don kayan tuntuɓar abinci.
3003 Da'irar Aluminum don Mai dafa Matsi ya kasance ɗayan mafi kyawun kayan albarkatun don samar da mai dafa abinci saboda yana ba da ainihin haɗin da masana'antu ke buƙata.: mai kyau drawability, abin dogara juriya na lalata, Karfin yarda, da ingantaccen canja wurin zafi.
Ba shine mafi ƙarfi aluminum gami, amma yana ɗaya daga cikin madaidaitan allurai don kera kayan girki.
Daga mahangar masana'antu, nasara ya dogara fiye da lambar alloy.
Madaidaicin fushi, sarrafa blanking, barga kauri, dace annealing, da tsabtace saman ƙasa duk suna ƙayyade ko mai dafa abinci na ƙarshe ya dace da tsammanin aiki.
Saboda wannan dalili, 3003 an fi fahimta a matsayin kayan aiki: ƙimarsa ta fito ne daga hulɗar tsakanin ƙarfe da sarrafa tsari.
A1: Suna haɗa kyakkyawan aikin zane mai zurfi, abin dogara matsa lamba juriya, juriya lalata, amincin abinci, high thermal watsin, ƙira mai sauƙi, da ingancin farashi. Ƙarin manganese (1.0-1.5%) yana bayar da kusan 20% ƙarfin mafi girma fiye da aluminium mai tsabta yayin da yake riƙe kyakkyawan tsari.
A2: Ya fushi yayi m plasticity (≥20% elongation) don hadaddun, ayyuka masu zurfi mai zurfi-mataki-mataki. H14 zafi yana ba da ƙarfi mafi girma (150-180 MPa tensile) don ɗaukar matsi, tare da isasshen tsari (≥8% elongation) don yawancin ƙirar dafa abinci mai matsa lamba. H14 shine madaidaicin zaɓi don yawancin masu dafa abinci na gida.
A3: 3003 aluminum tayi 12× mafi girma thermal watsin (190 vs. 15-16 W/m·K), ne 1/3 nauyi (2.73 vs. 7.9 g/cm³), kuma yana da ƙananan kayan aiki da farashin sarrafawa. Bakin karfe yana ba da ƙarfi mafi girma (515+ MPa) kuma mafi girman juriya na lalata. Ga mafi yawan masu dafa abinci matsa lamba na gida, 3003 aluminum yana ba da mafi kyawun ma'auni na aiki da ƙima.
A4: Yawan kauri na diski na farko ya fito daga 2.0 mm ku 4.0 mm, ya danganta da karfin mai dafa abinci. Bayan zane mai zurfi, kaurin bangon ƙarshe yawanci yana fitowa daga 1.2 mm ku 2.5 mm. Manyan injin dafa abinci ko rukunin kasuwanci suna buƙatar abu mai kauri.
A5: Ee. 3003 An kera da'irorin aluminium don dacewa da ƙa'idodin tuntuɓar abinci na duniya gami da FDA, EU 1935/2004, LFGB, da GB 4806.9. Tsarin oxide na halitta yana da kwanciyar hankali kuma ba shi da aiki, hana mu'amala da abinci yayin dafa abinci.
A6: Daidaitaccen dafaffen matsi na gida suna aiki a 0.7-1.0 bar (70-100 kPa) sama da matsa lamba na yanayi. An ƙera su tare da iyakokin aminci na 3-5× matsa lamba mai aiki domin fashe juriya. H14 zafi 3003 aluminum yana ba da isasshen ƙarfi don waɗannan buƙatun.
A7: Tsaftace 3003 aluminum ba maganadisu ba kuma ba zai iya haifar da zafi kai tsaye ta hanyar shigar da shi ba. Don shigar da dafa abinci, 3003 Aluminum matsa lamba cookers yawanci haɗa da bonded Magnetic bakin karfe tushe Layer wanda ma'aurata tare da shigarwa filin, yayin da jikin aluminum yana samar da wutar lantarki mai zafi da ginin nauyi.
1. Gabatarwa 3003 aluminum……
1. Gabatarwa Kamar yadda masana'antu…….
Gabatarwa A cikin duniyar nan……
8011 H18 blister aluminum fo……
Gabatarwa zuwa 1050 Epoxy C……
1. Gabatarwa 8011 Embosse……
Henan Huasheng Aluminum Co., Ltd., Ltd (HHALU a takaice), kafa a 2001, yana cikin Garin Huiguo, Shahararren babban birnin Aluminum na lardin Henan, Kwararren masana'anta ne kuma yana yin bincike, ci gaba, samarwa, Talla da sabis na aluminum farantin karfe, karfen aluminum, aluminum foil, aluminum tsiri da aluminum da'ira.
Bugu da kari, Har ila yau, HHALU yana sayar da farantin aluminum don gine-gine da jiragen ruwa, aluminum madubi farantin, da mota aluminum gami farantin.
Na 53, Hanyar Dongming, Zhengzhou, Henan, China
Haƙƙin mallaka © Huasheng Aluminum 2025. An kiyaye duk haƙƙoƙi.
