| Tlhaloso | Lintlha |
| Alloy | 3003 Aluminium |
| Khalefo | H24 |
| Botenya | 140μm |
| Bophara | 100-1600 mm |
| Surface Finish | Mokhoa oa ho roala |
Joalo ka ha liindasteri li ntse li batla boima bo bobebe, e thibelang ho bola, le thepa e thehang haholo, 140μm 3003 H24 e koahetsoeng ka foil ea aluminium e se e le thepa ea bohlokoa ea boenjiniere ea ho paka, kaho, ho kenya letsoho, Sistimi ea HVAC, lisebelisoa tsa ntlo, le tlhahiso ea indasteri.
Ho kopanya khabane e ntle ea kutu ea ho hanyetsa ea 3003 motsoako oa aluminium, e leka-lekaneng thepa thepa ea H24 khalefo ea H24, le tšireletso e matlafalitsoeng e fanoang ke litsamaiso tse khethehileng tsa ho roala, thepa ena e fana ka motsoako o motle oa ho tšoarella, tshebetsong, le katleho ea litšenyehelo.
Botenya ba 140 microns (0.14 mm), foil e na le boemo bo ikhethang pakeng tsa foil ea setso ea aluminium le letlapa le lesesaane la aluminium.
E fana ka botsitso bo boholo ho feta li-foil tse tšesaane haholo ha li ntse li boloka melemo e bonolo le e bobebe e amanang le lisebelisoa tsa aluminium..
Motsoako oa motsoako oa motsoako, boemo ba bohale, 'me theknoloji ea ho roala e etsa 140μm 3003 H24 e koahetsoeng ka foil ea aluminium ke lisebelisoa tse loketseng bakeng sa lits'ebetso tse hlokang ho leka-lekana pakeng tsa matla, khanyetso ea kutu, sebopehong, le ponahalo e ntle.
140μm 3003 H24 Aluminium Foil e Koaheletsoeng
140μm 3003 H24 e koahetsoeng ka aluminium foil ke sehlahisoa sa aluminium se entsoeng ka mokhoa o nepahetseng se entsoeng ka AA3003 aluminium motsoako, sebetsoa ka har'a H24 boemo ba bohale, 'me ka mor'a moo e koahetsoe ka liphahlo tse sebetsang kapa tse khabisitsoeng ho ntlafatsa ts'ebetso ea holim'a metsi.
Botenya bo bapala karolo ea bohlokoa ho khethollang boitšoaro ba mochini le ho nepahala ha kopo ea foil ea aluminium.
Phetoho ea Botenya
| Yuniti | Boleng |
|---|---|
| Li-micrometer | 140 μm |
| Limilimithara | 0.14 mm |
| Li-inches | 0.0055 ho |
Ho 140 microns, thepa e teteaneng haholo ho feta foil e tloaelehileng ea ho paka, eo hangata e tlohang ho 6-50 μm.
3003 aluminium foil ke ea Al-Mn (Aluminium-Manganese) lelapa la alloy mme ke e 'ngoe ea lisebelisoa tse sebelisoang ka ho fetesisa tsa aluminium lefatšeng ka bophara.
The alloy contains approximately 1.0- 1.5% manganese, e eketsang matla haholo ha e bapisoa le aluminium e hloekileng ea khoebo.
Sebopeho se Tloaelehileng sa Lik'hemik'hale
| Element | Litaba (%) |
|---|---|
| Aluminium (Al) | Ho leka-lekanya |
| Manganese (Mong) | 1.0-1.5 |
| Koporo (Cu) | 0.05-0.20 |
| Silicone (Le) | ≤0.60 |
| Tšepe (Fe) | ≤0.70 |
| Zinki (Zn) | ≤0.10 |
Ho khethoa ha mocheso ho bohlokoa ho khetholla ts'ebetso ea aluminium.
Tlhaloso ea H24
Ho ea ka likarolo tsa aluminium temper:
Ka mantsoe a sebetsang, 3003-H24 e fana ka tekanyo pakeng tsa matla le ductility.
E matla ebile e thata ho feta 3003-O e kentsoeng, empa e bopehile ho feta bohale bo thata joalo ka H26 kapa H18.
| Khalefo | Boemo ba Matla | Formability | Tšebeliso e Tloaelehileng |
|---|---|---|---|
| 3003-O | Tlase | E kgabane | Setšoantšo se tebileng, sebopeho se bonolo |
| 3003-H14 | Mahareng | E ntle | Kakaretso ea lakane le foil ho etsa |
| 3003-H22 | Mahareng-tlase | Hantle haholo | Lisebelisoa tsa ho etsa tse itekanetseng |
| 3003-H24 | Mahareng-hodimo | E ntle | Foil e koahetsoeng, likhurumetso, dikarolo tse bopehileng tse thata |
| 3003-H26 | E phahameng | E itekanetseng | Likarolo tse thata tse nang le sebopeho se lekanyelitsoeng |
| 3003-H18 | Phahameng | Moedi | Boima bo phahameng, sebopeho se fokolang |
H24 hangata e khethoa ha foil e tlameha ho tšoara sebopeho, hanela deformation, mme o ntse o mamella ho bopa kapa ho phunya ntle le ho petsoha.
140μm 3003 Lesela la Aluminium le Koaheletsoeng ka H24 le Pakiloeng ke Huasheng
Ho roala ho fetola substrate ea aluminium hore e be lisebelisoa tse khethehileng tsa kopo.
Ho itšetlehile ka tšebeliso ea ho qetela, ho roala ho ka fana ka khanyetso ea kutu, tshireletso ya dijo, tshebetso ya ho tiisa mocheso, mokhabiso, ho kenya letsoho, kapa tumellano ya bonding.
| Mofuta oa ho roala | Mosebetsi o ka Sehloohong | Kopo e tloaelehileng |
|---|---|---|
| Ho roala ka epoxy | Tšireletso ea kutu le ho khomarela | Li-Lids, likhepisi, likarolo tsa indasteri |
| Ho roala ha PE | Ho hanyetsa mongobo le ho tiisa mocheso | Ho paka lijo, foil e entsoeng ka laminated |
| Ho roala PP | Ho hanyetsa mocheso o phahameng ho feta PE | Khutlisetsa literei, sephuthelo sa ho tlatsa se chesang |
| Ho roala ka polyester | Ho tšoarella ha sefahleho le mokhabiso | Liphanele tse khabisitsoeng, mabitso, lamates |
| Mocheso-seal lacquer | Ts'ebetso ea ho tiisa e laoloang | Likoahelo tsa lebese, literei, ho tiisa lera |
| Lacquer ea boemo ba lijo | Tšireletso ea ho kopana le lijo | Lijana, likhurumetso, literei tsa lijo |
| Ntho | Tlhaloso e Tloaelehileng / Reference Range |
|---|---|
| Lebitso la sehlahisoa | 140μm 3003 H24 e koahetsoeng ka foil ea aluminium |
| Alloy | 3003 |
| Khalefo | H24 |
| Botenya | 0.140 mm / 140μm |
| Ho mamella botenya | Hangata ± 3–5%, kapa tse boletsoeng ke moreki |
| Bophara | Bophara ba sekheo sa tloaelo, hangata 50-1600 limilimithara |
| Bophara ba ka hare | 76 mm kapa 152 mm, e boletsoeng ke moreki |
| Bophara ba kantle | Ho latela boima ba 'mele le tlhoko ea ho paka |
| Boemo ba bokahodimo | Hloekileng, koetsoe, sephara, e hlokang bofokodi bo boholo |
| Lehlakore la ho roala | Ho roala ka lehlakore le le leng kapa ka mahlakoreng a mabeli |
| Mofuta oa ho roala | Epoxy, polyester, acrylic, PU, lacquer ea mocheso, hydrophilic, hydrophobic, Primil |
| Boima ba ho roala | Hangata 1–10 g/m² ka lehlakoreng le leng, ho itšetlehile ka mosebetsi oa ho roala |
| Mmala | Hlakisa, khauta, tšoeu, mmala, kapa tse boletsoeng ke moreki |
| Kalafo | E tlositsoe, pretreated, koetsoe, folisoa |
| Sephutheloana | Sephutheloana sa lehong kapa se romelloang kantle ho naha se loketseng leoatleng |
| Foromo e tloaelehileng ea phepelo | Qheketsa, khoele, letlapa, foil e khabisitsoeng, setoko se koahetsoeng |
Bakeng sa lits'ebetso tsa bohlokoa joalo ka li-lids tsa ho ikopanya le lijo, foil e tiisang e amanang le meriana, kapa HVAC fin stock, litlhaloso tsa ho roala li lokela ho kenyelletsa ho khomarela, khanyetso ea kutu, tshebetso ya ho tiisa, le liphatlalatso tsa tumellano.
Ts'ebetso ea 140μm 3003 H24 e koahetsoeng ka aluminium foil e khethoa haholo ke litšobotsi tsa mochini tsa 3003 motsoako le phello e matlafatsang ea H24 temper.
| Thepa | Boleng bo Tlwaelehileng |
|---|---|
| Matla a tšepe | 145-195 MPa |
| Kotulo Matla | ≥115 MPa |
| Elongation | 4-10% |
| Ho thatafala (HV) | 45-60 |
| Elastic modulus | 69 GPA |
| Thepa | Boleng |
|---|---|
| Botenya | 2.73 g/cm³ |
| Thermal Conductivity | 180–210 W/m·K |
| Motlakase Conductivity | 40-45% IACS |
| Mefuta e mengata | 643-654°C |
| Mocheso oa Katoloso ea Mocheso | 23.6 × 10⁻⁶/K |
| Reflectivity | 80-88% |
140μm 3003 H24 e koahetsoeng ka foil ea aluminium e sebetsa hantle ha kopo e hloka matla le ts'ebetso.
Melemo ea mantlha ea ts'ebetso e kenyelletsa:
Mokhoa o koahetsoeng oa foil ea aluminium
Tlhahiso e qala ka li-ingots tsa aluminium le litlatsetso tse laoloang tsa alloying. Manganese e fana 3003 matla a eona a ntlafetseng le ho hanyetsa ho bola.
Ka mor'a ho lahla le homogenization, thepa e feta har'a ho bilika ho chesang le ho pitikoloha ho batang ho atamela tekanyo ea sepheo.
Leloala le laola phokotso ea serame le ho koaleha ho fihlela mocheso oa H24.
Mohato ona oa bohlokoa hobane boima bo feteletseng bo ka fokotsa sebopeho, athe boima bo sa lekaneng bo ka baka ho boloka sebopeho se futsanehileng.
Pele o koahela, bokaholimo ba foil bo hloka ho hloekisoa hantle le ho etsoa esale pele.
Masala a oli, ho se tsitse ha oxide, lerole, kapa mongobo ka fokolisa barbotage adhesion.
Ho roala ho ka sebelisoa ka ho roala li-roller, Lacquering, kapa mekhoa e amanang le lamination.
Ka mor'a kopo, ho omisa le ho fola ho laoloang ho theha sekhomaretsi se hlokahalang, tenyetseha, le khanyetso ea lik'hemik'hale.
Foil e koahetsoeng e petsoha ho ea bophara bo hlokahalang. Ho khaola ka nepo ho fokotsa li-burrs, mapetsong a mathoko, le likoli tse matsoelintsoeke.
Taolo ea tsitsipano e tsitsitseng e sireletsa boleng ba bokaholimo mme e thibela ho senyeha ha sebonela-hōle kapa ho senyeha ha khola.
Hangata tlhahlobo e akaretsa botenya, bophara, sephara, mefokolo e ka hodimo, ho khomarela ho roala, Poholes, thepa ea mochini, le boleng ba ho paka.
140μm 3003 H24 Aluminium Foil e Koaheletsoeng Bakeng sa Kaho
Ho tenyetseha ha 140μm 3003 H24 e koahetsoeng ka foil ea aluminium e tsoa ho thepa ea eona e leka-lekaneng ea mochini, ho hanyetsa ha kutu, pheletso e kgahlehang ya bokahodimo, le bonolo ba ho qapa.
Botenya ba eona ba 140μm bo fana ka ho tiea ho feta foil e tloaelehileng ha e ntse e le bobebe ebile e sebetsa haholo..
Ka hoo, thepa ena ho pharaletseng sebelisoa ho pholletsa le kaho, HVAC, phutheloana, sepalangoang, tlhahiso ea lisebelisoa, le mafapha a indasteri.
Indasteri ea kaho ke e 'ngoe ea bareki ba kholo ka ho fetisisa ba lihlahisoa tsa aluminium tse koahetsoeng.
Hobane aluminium e na le conductivity e ntle ea mocheso le e bonahatsang maikutlo, 140μm 3003 Foil e koahetsoeng ka H24 e sebelisoa haholo lits'ebetsong tsa HVAC.
Lisebelisoa tsa mehleng ea kajeno li ntse li sebelisa lisebelisoa tsa aluminium tse koahetsoeng ka lebaka la ho tšoarella ha tsona le ponahalo ea tsona.
Le hoja li-foil tse tšesaane tsa aluminium li laola liphutheloana tse tenyetsehang, 140μm e koahetsoeng ka foil ea aluminium e sebelisoa khafetsa lits'ebetsong tse sa tsitsang le tse khethehileng tsa ho paka..
Sephutheloana se Sebelisitsoeng 3003 Foil ea Aluminium e koahetsoeng
Lefapha la lipalangoang le ntse le tsoela pele ho rata lisebelisoa tse bobebe ho ntlafatsa ts'ebetso ea matla.
Hangata baetsi ba indasteri ba hloka lisebelisoa tse kopanyang nako e telele le ho hanyetsa kutu.
Boleng bo botle ba bokaholimo ba foil ea aluminium e koahetsoeng bo etsa hore e loketse lits'ebetso tse bonoang.
Lekala la matla a tsosolositsoeng le fetohile 'maraka o hlahang oa lisebelisoa tsa aluminium tse koahetsoeng.
| Thepa | 3003 H24 Aluminium Foil e Koaheletsoeng | 1050 Aluminium Foil | 5052 Aluminium Foil | Tšepe ea Galvanized | Ts'epe e sa beng le mabali 304 |
|---|---|---|---|---|---|
| Botenya (g/cm³) | 2.73 | 2.71 | 2.68 | 7.85 | 8.00 |
| Matla a tšepe (MPa) | 145-195 | 80–120 | 210-280 | 270–500 | 520–720 |
| Khanyetso ea Corrosion | E kgabane | E kgabane | E kgabane | E itekanetseng | E kgabane |
| Formability | E kgabane | E kgabane | E ntle | E itekanetseng | E itekanetseng |
| Thermal Conductivity (W/m·K) | 180–210 | 220-230 | 130-150 | 50 | 15 |
| Boima ba 'mele | E tlase haholo | E tlase haholo | E tlase haholo | Phahameng | Phahameng |
| Ho lumellana ha Coating ea Bokaholimo | E kgabane | E kgabane | E kgabane | E ntle | E itekanetseng |
| Litšenyehelo | E itekanetseng | Tlase | E phahameng | Tlase | Phahameng |
Henan Huasheng Aluminium Co., Ltd. ke morekisi oa aluminium ho tsoa Henan, China, ho fana ka lakane ea aluminium, poleiti, khoele, hlobolisa, le lihlahisoa tsa foil bakeng sa ho paka le lisebelisoa tsa indasteri.
Bakeng sa bareki ba 140μm 3003 H24 e koahetsoeng ka foil ea aluminium, bokhoni ba mofani oa thepa bo lokela ho tsepamisa maikutlo taolong e tsitsitseng ea alloy, botshepehi ba ho roala, sephutheloana sa kantle ho naha, le puisano ea theknoloji.
Boleng ba Huasheng bakeng sa sehlahisoa sena bo ka hlahisoa ka litlhoko tse sebetsang tsa bareki:
Bakeng sa liphetho tse ntle, bareki ba lokela ho arolelana kopo ea ho qetela, botebo ba ho bopa, mocheso oa ho tiisa, tlhokahalo ea ho roala, le bophara ba thepa pele o laela.
140μm 3003 H24 e koahetsoeng ka foil ea aluminium ke ntho e sebetsang, thepa ya boleng bo hodimo bakeng sa ho paka, setshelo, sekwahelo, laminate, le lisebelisoa tsa indasteri.
Ea eona 0.14 botenya ba limilimithara e fana ka khanyetso e matla ea ho phunya le ho boloka sebopeho hantle ho feta foil e tšesaane. 3003 Al-Mn motsoako e fana ka khanyetso ea kutu le matla a itekanetseng.
Ea eona H24 khalefo ea H24 e leka-lekanya botsitso le sebopeho. Qetellong, mokhoa oa eona oa ho roala o eketsa mosebetsi o nepahetseng o hlokoang ke sehlahisoa sa ho qetela, hore na hoo ho bolela ho tiisa mocheso, tshireletso ya dijo, mokhabiso, kapa ho hanyetsa ho bola.
Bakeng sa bahlahisi, molemo ka ho fetisisa ho reka qeto e itšetlehile ka ho feta botenya le theko. Mofuta oa ho roala, ho khomarela, botsitso ba bohale, boleng ba bokahodimo, bonnete ba ho petsola, le ts'ehetso ea bafani bohle ba fumana ts'ebetso ea 'nete ea tlhahiso.
Ke a 0.14 limilimithara tse teteaneng tse entsoeng ka aluminium foil 3003 motsoako oa aluminium ka mocheso oa H24. E sebelisoa bakeng sa lijana, likhurumetso, literei, lamates, ho tiisa lera, le lihlahisoa tsa foil tse koahetsoeng ke indasteri.
Ee. 140'm = 0.14 mm, kapa hoo e ka bang 5.51 mil.
3003 aluminium e fana ka matla a betere ho feta aluminium e hloekileng, khanyetso e ntle ea kutu, le sebopeho se ka tšeptjoang. E lumellana le sephutheloana, lijana, likhurumetso, le lisebelisoa tse koahetsoeng ka foil.
H24 e bolela hore aluminiamo e thatafalitsoe 'me e kentsoe karolo e itseng. E fana ka tekanyo e sebetsang ea matla, tenyetseha, le botsitso ba dimensional.
Ee, haeba e sebelisa seaparo se loketseng sa boemo ba lijo 'me se finyella litekanyetso tse hlokahalang tsa ho kopana le lijo.
PE, PP, kapa lacquer ea tiiso ea mocheso e ka sebetsa, ho itšetlehile ka mocheso oa ho tiisa, mofuta oa lijo, sebopeho sa ho paka, le maemo a thepa.
Aluminium ka boeona e ka sebelisoa hape, empa ho sebelisoa ha foil ho itšetlehile ka mofuta oa ho roala, boemo ba tshilafatso, le litsamaiso tsa lehae tsa ho recycle. Lisebelisoa tse hloekileng tsa indasteri hangata li na le boleng bo betere ba ho li sebelisa hape.
1. Selelekela Joalo ka indasteri……
Selelekela Lefatšeng la……
8011 H18 blister aluminium fo ……
Selelekela ho 1050 Epoxy C……
1. Selelekela 8011 Embosse……
1. Selelekela ho 3003 Alum……
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
