Својства и карактеристики на 1050 алуминиум
Алуминиумска плоча 1050 одделение е комерцијално чиста кована алуминиумска легура со минимум од 99.5% содржина на алуминиум. It’s known for its excellent corrosion resistance, висока еластичност, and highly reflective finish.
Хемиски состав
Елемент |
Присутни |
Алуминиум (Ал) |
>= 99.50 % |
Бакар (Cu) |
<= 0.05 % |
Магнезиум (Мг) |
<= 0.05 % |
Силикон (И) |
<= 0.25 % |
Железо (Fe) |
<= 0.40 % |
Манган (Мн) |
<= 0.05 % |
Цинк (Zn) |
<= 0.05 % |
Титаниум (На) |
<= 0.03 % |
Ванадиум, В |
<= 0.05 % |
Друго, секој |
<= 0.03 % |
Механички својства
Имотот |
Вредност |
Јачина на истегнување |
105 – 145 MPa |
Hardness Brinell |
21-43 HB |
Elongation A |
4.6 до 37 % |
Физички својства
Имотот |
Вредност |
Густина |
2.71 kg/m³ |
Точка на топење |
646 – 657 °C |
Модул на еластичност |
68 GPa |
Електрична отпорност |
0.282 x 10^-6 Ω.м |
Топлинска спроводливост |
230 В/м.К |
Термално ширење |
24 µm/m-K |
Fabrication Response
Процес |
Rating |
Workability – Cold |
Одлично |
Обработливост |
Poor |
Weldability – Gas |
Одлично |
Weldability – Arc |
Одлично |
Weldability – Resistance |
Одлично |
Brazability |
Одлично |
Solderability |
Одлично |
1050 Aluminum Sheet Plate Specifications
Легура |
1050 |
Темперамент |
О, H14, H24, H1 |
Дебелина (мм) |
0.20 до 6.0 |
Ширина (мм) |
20.0 до 2,600 |
Должина (мм) |
1,000 до 4,000, или намотка |
Површинска завршница |
Финиш за мелница |
Стандардна спецификација |
МК/Т 3880 |
Типично 1050 Плоча од алуминиумски лим
На 1050 aluminum sheet plate is a popular choice for various applications due to its excellent corrosion resistance, висока еластичност, and highly reflective finish. Here are some typical specifications for different tempers of the 1050 алуминиумска плоча:
- 1050a H24 : This temper has been work-hardened and partially annealed. It’s known for good ductility and is used in applications requiring extensive forming operations.
- 1050 H18 : This is a fully work-hardened temper providing high tensile strength. It’s commonly used where structural strength is a primary requirement.
- 1050 H14 : Half-hard tempered, it’s used for applications that require a combination of increased strength and ductility.
- 1050 О : Анализирана, it has the lowest strength but the highest ductility among the 1050 серија. It’s suitable for applications involving intricate forming.
- 1050 H12 : Quarter-hard tempered, it offers a balance of strength and ductility for general-purpose applications.
- 1050 H16 : A stronger version of the H14, it provides a good surface finish and is often used in decorative applications.
Each temper has its unique properties that make it suitable for specific applications. На пример, на 1050 H14 is known for its use in chemical process plant equipment, food industry containers, and architectural flashings due to its workability and corrosion resistance. The alloy composition typically includes a minimum of 99.5% aluminum with traces of other elements to enhance its properties.
Што е 1050 Aluminum Sheet Plate Used for?
AA 1050 Aluminum for Kitchenware and Cookware
1050 aluminum sheet is often used to make utensils, pots and pans and other kitchen utensils due to its excellent formability and corrosion resistance.
- Легура : 1050А
- држава : О (антена) or H12
- Спецификации : Typical thickness is 0.5-3.0 мм
- Application areas : Саксии, тави, cutlery and other kitchen utensils
- Example : pan
- Reasons to use it : 1050A aluminum has excellent formability and corrosion resistance, making it ideal for kitchenware and cookware that requires extensive forming and exposure to corrosive environments.
1050 Aluminum for Chemical and Food Processing Equipment
The excellent corrosion resistance of 1050 aluminum makes it suitable for use in chemical and food processing equipment such as tanks, pipes and containers.
- Легура : 1050
- Статус : H14 or H24
- Спецификации : Typical thickness is 1.0-6.0 мм
- Applied Parts : Tanks, Pipes and Vessels
- Example : Chemical Treatment Tank
- Why use it : 1050 aluminum has excellent corrosion resistance and can withstand exposure to aggressive chemicals and food.
1050 Aluminum for Roofing and Construction
The lightweight and corrosion-resistant properties of 1050 aluminum sheet make it a popular choice for roofing and construction applications such as gutters, downspouts, and shingles.
- Легура : 1050
- Статус : H14 or H24
- Спецификации : Typical thickness is 0.5-3.0 мм
- Applied Parts : Gutters, Downspouts and Roof Slabs
- Example : roof panels
- Why you should use it : 1050 aluminum is light, отпорен на корозија, and formable, making it an ideal material for roofing and construction applications.
1050 Aluminum Reflectors and Lighting Fixtures
The high reflectivity and formability of 1050 aluminum make it suitable for use in reflectors and lighting fixtures.
- Легура : 1050
- Темперамент : H16
- Спецификации : Typical thickness is 0.25-2.0 мм
- Applied parts : рефлектори, уреди за осветлување
- Example : Light Reflector
- Why use it : 1050 aluminum is highly reflective and formable, making it ideal for use in reflectors and lighting fixtures.
Signage and Decorative Trim
The formability and aesthetics of 1050 aluminum make it a popular choice for signage, trim and other architectural applications.
- Легура : 1050
- Статус : H14 or H24
- Спецификации : Typical thickness is 0.5-2.0 мм
- Application parts : знаци, decorative strips
- Example : Architectural Decoration
- Reasons for use : 1050 aluminum has good formability and aesthetic appearance, and is an ideal material for architectural decoration and signage.
Електрични компоненти
Високата топлинска спроводливост на 1050 aluminum makes it an ideal material for use in electrical components such as heat sinks and PCB substrates.
- Легура : 1050
- држава : О (антена) or H14
- Спецификации : Typical thickness is 0.5-3.0 мм
- Applied parts : heat sink, PCB substrate
- Example : Radiator
- Why you should use it : 1050 aluminum has high thermal conductivity, making it an ideal material for heat sinks and other electrical components that require efficient heat dissipation.
What is the Price of Aluminum 1050 Sheet Plate?
The price of Aluminum 1050 sheet plate can fluctuate significantly based on several factors, вклучувајќи ја и тековната пазарна цена на алуминиумот, дебелината на листот, големина, и секоја дополнителна обработка или завршна обработка. Recently, цената на 1050 plain sheet plate has been around US$2,800 per ton.If surface treatment is involved, such as color coating, елоксирање, итн., the price will increase.