| Whakatakotoranga | Taipitopito |
|---|---|
| Kohanga | 1050 |
| Te riri | O, H12, H14 |
| Mātotoru | 0.36mm – 5mm |
| Diamita | 120mm – 1000mm |
| Hanga | Porowhita, Porotītaha, Tapawhā |
| Min Ota | 3000 kgs ia rahi |
Ko te 1050 Ko te porowhita kōpae konumohe e mohiotia ana mo ona ahuatanga pai e tino pai ana mo nga momo tono. Anei etahi ahuatanga matua:
Ko enei taonga ka hanga i te 1050 porowhita kōpae konumohe he whiringa rongonui i roto i nga umanga he mea nui enei ahuatanga mo te hua mutunga.
Anei te hanganga matū o te 1050 Porowhita Kōpae Aluminium kua whakaatuhia ki te teepu:
| Huānga | % ma te Taumaha |
| Konumohe (Ko Al) | 99.50 (min) |
| Te parahi (Cu) | 0.05 (mōrahi) |
| Te rino (Fe) | 0.40 (mōrahi) |
| konupora (Mg) | 0.05 (mōrahi) |
| konupora (Mn) | 0.05 (mōrahi) |
| Silicon (Na) | 0.25 (mōrahi) |
| Zinc (Zn) | 0.05 (mōrahi) |
| Titanium (O) | 0.03 (mōrahi) |
| Vanadium, V | 0.05 (mōrahi) |
| Ētahi atu, ia | 0.03 (mōrahi) |
Ka hoatu e tenei titonga te 1050 Porowhita Kōpae Aluminium tona ahua tino pai, parenga waikura, me te weldability, kia pai ai mo te whānuitanga o nga tono.
| Whakatakotoranga | Taipitopito |
| Kohanga | 1050 |
| Te riri | O, H12, H14 |
| Mātotoru | 0.36mm – 5mm |
| Diamita | 120mm – 1000mm |
| Hanga | Porowhita, Porotītaha, Tapawhā |
| Min Ota | 3000 kgs ia rahi |
Nga Taonga Miihini:
Āhuatanga ā-tinana:
E mohiotia ana enei kopae mo te tino pai o te hanga, whakaata teitei, me te mahi pumau mo te anodization mata, whakamahia i roto i te tunu kai, taputapu rama, me nga taonga hanga whare.
| Diamita (mm) | Te manawanui (mm) |
| 100 – 400 | ±0.5 |
| 401 – 800 | ±1.0 |
| 801 – 1200 | ±1.5 |
| Hua | Mātotoru |
| 1050 Porowhita Aluminium | 1.0mm |
| 1050 Porowhita Aluminium | 1.5mm |
| 1050 Porowhita Aluminium | 2.0mm |
| 1050 Porowhita Aluminium | 2.5mm |
| 1050 Porowhita Aluminium | 3.0mm |
| Maimoatanga Mata | 1050 Kōpae Aluminium Anodized | 1050 Kōpae Aluminium Whakakikorua Tae |
| Nga tono | Te tunu kai, whakamarama, whakaataata, tohu, whakapaipai | Te tunu kai, tohu tohu, huānga hoahoanga, whakapaipai |
| Nga painga | 1. Whakarei ake i te waikura
2. Kua pai ake te mauroa 3. Te ahua ataahua 4. Kore-paitini |
1. Te ahua ka taea te whakarite
2. Parenga 3. Whakaritenga utu-whai hua |
| Nga huakore | Utu (tukanga utu nui ake) | 1. He iti ake te parenga waikura
2. Te whakaraeraetanga pakaru 3. Te whakatikatika matatini |
Ko nga kopae konumohe anodized he pai mo nga tono e hiahia ana kia tiakina me te whakaoti ataahua, me te paparanga waikura roa e pai ake ai te aukati waikura me te mau atete.
Ko nga kopae konumohe kua whakakikoruatia te tae he maha ki te hoahoa me te whakamarumaru atu. He whiringa utu-utu mo te whakatutuki i nga ahua motuhake engari he iti ake te roa ki nga taiao kino..
Ko nga momo e rua ka pai ake te mauroa me te whakakitenga, me te whiriwhiri i runga i nga whakaritenga motuhake o te kaupapa.
| Te riri | Awhe Matotoru (mm) | Te Kaha Toka (MPa) | Te whakaroa (%) |
| KI | 0.36-5 | 60-100 | ≥ 20 |
| H12 | 0.5-5 | 70-120 | ≥ 4 |
| H14 | 0.5-5 | 85-120 | ≥ 2 |
1050 Ko te kōpae konumohe H12 kei roto i te ahua ahua-pakeke me te pai o te ahua me te pai mo nga hua me te kopikopiko nui.
| Whakatakotoranga | Awhe |
| Diamita (mm) | 200 – 1200 |
| Mātotoru (mm) | 0.3 – 10 |
| Taupānga | Nga taputapu kihini, rama, whare hiko, etc. |
1050 H14 kōpae konumohe kei roto i te ahua-pakeke me te mata maeneene, he pai mo nga hua me nga ahua uaua.
| Whakatakotoranga | Awhe |
| Diamita (mm) | Ko te tikanga 200 – 1200 |
| Mātotoru (mm) | 0.5 – 6 |
| Taupānga | Ko nga hua hohonu penei i nga kohua, taupoki kohua, totohu, etc. |
1050 Ko te kōpae konumohe H18 kei te ahua pakeke, he pai mo nga hua e hiahia ana kia kaha te kaha me te whakakakahu i te aukati.
| Whakatakotoranga | Awhe |
| Diamita (mm) | Ko te tikanga 200 – 1200 |
| Mātotoru (mm) | 0.5 – 10 |
| Taupānga | Anga anga, paipa, ipu, etc. |
1050-Ko te kōpae konumohe kua oti te whakakii me te ahua ngawari, e tika ana mo nga kounga hohonu.
| Whakatakotoranga | Awhe |
| Diamita (mm) | Ko te tikanga 200 – 1200 |
| Mātotoru (mm) | 0.2 – 4 |
| Taupānga | Ko nga taputapu kihini hohonu |
Ko te 1050 Aluminium Disc Circle is popular in cookware manufacturing due to its excellent properties. Here’s why it’s widely used:
These characteristics make 1050 Aluminum an excellent choice for high-quality cookware products, such as non-stick pots, pressure cookers, and other kitchen utensils.
Below is a comparative table highlighting the key differences and similarities between 1050 a 1060 aluminium disc circles:
| Taonga | 1050 Porowhita Kōpae Aluminium | 1060 Porowhita Kōpae Aluminium |
| Aluminium Content | At least 99.5% | At least 99.6% |
| Te kaha | He iti ki te ngawari | Slightly higher than 1050 |
| Workability | Tino pai | Tino pai |
| Te Whakawhitinga Ngawha | 230 W/m-K | slightly higher than 1050 |
| Te Waihanga Atete | Tino pai | Tino pai (marginally better than 1050) |
| Te Kawenga Hiko | 61% IACS | 62% IACS |
| Nga tono | Te tunu kai, electrical applications, taputapu matū, decorative items | Te tunu kai, electrical applications, taputapu matū, decorative items |
| Utu | Slightly lower | He iti ake te teitei (depends on market) |
Kupu Whakataki 1060 Konumohe……
Kupu Whakataki: Kei Huasheng Al…
Kupu Whakataki konumohe konumohe……
Kupu Whakataki 1070 Konumohe……
Kupu whakataki ki 3004 Konumohe……
Kupu Whakataki Nau mai ki Huas……
Henan Huasheng Aluminium Co., Ltd (HHALU mo te poto), whakapumautia i roto i 2001, kei te Taone o Huiguo, te whakapaipai Aluminium rongonui o Henan Province, He kaihanga ngaio, ka uru ki te rangahau, whanaketanga, whakaputanga, hoko me te ratonga o te pereti pepa konumohe, porowhita konumohe, pepa konumohe, takai konumohe me te porohita konumohe.
I tua atu, Ka hokona ano e HHALU te pereti konumohe mo te hanga me nga kaipuke, pereti whakaata konumohe, me te pereti konumohe miihini miihini.
Nama53, Te huarahi o Dongming, Zhengzhou, Henan, Haina
Mana pupuri © Huasheng Aluminium 2023. Katoa nga mana.
