Sebakeng sa Aluminium Alloys, 5052 e emetse khetho e tloaelehileng ka lebaka la ho hanyetsa ha eona e kholo, matla a itekanetseng, Mekhoa e Meholo e Ntle.
Leha ho le joalo, Potso eo e hlahang khafetsa har'a lienjiniere, li-rabricators, le ho itlotsa ka mokhoa o tšoanang ke hore na 5052 Mahala a aluminium a hlile a sa ratehe ntle ho tefo ea bona.
Tataiso ena e felletseng e ikemiselitse ho nyahama ntlheng ena, Ho u fa leseli le tebileng ka ho ba teng ka har'a 5052 lipampiri tsa aluminium, E tšehelitsoe ke data, lintlha tsa tekheniki, le menahano e sebetsang.
Na 5052 Lauminium Sheet e ka ba
Pele o kena ka har'a litekanyo tsa Bluces, Ho utloisisa thepa ea mantlha ea 5052 Aluminium ke oa bohlokoa.
Alloy ena ke ea 5000 letoto, e nang le allominium e etselitsoeng magnesium, Ho fana ka khanyetso e kholo ea lihlahisoa, botle ba weldability, le matla a phahameng ka ho fetisisa.
| Thepa | Tlhaloso |
|---|---|
| Sebopeho sa Lik'hemik'hale | Aluminium (Al) Balance, Magnesium (Mg) 2.2-2.8%, Chromium (Kr) 0.15-0.35% |
| Matla a tšepe | 228 MPa (33 ksi) tloaelehileng |
| Kotulo Matla | 193 MPa (28 ksi) tloaelehileng |
| Elongation at Break | 12-20% ho latela bohale |
| Khanyetso ea Corrosion | E kgabane, haholo-holo libakeng tsa leoatle |
| Ho ba le Tsoelo-pele | Hantle haholo, ho kenyelletsa ho ba, ho bopa, le machining |
Bend e bua ka bokhoni ba leqephe la tšepe ho feta ba ho etsa sebfermation - ba se nang letsoho kapa ho hloleha. E susumetsoa ke lintlha tse 'maloa:
Lipereng tse ngata joalo ka meaho ea metsing, likarolo tsa likoloi, le liphanele tse khabisitsoeng, Bokhoni ba ho bella lishiti tsa aluminium libopeho tse rarahaneng ntle le hore li senyehe boitsebiso bo botle le bots'epehi ba sebopeho.
Teko ea ho beola HuaASheng 5052 Letlapa la Aluminium
| Thepa | Boleng / Range | Ho fanoa ka lebitso la ho khumama |
|---|---|---|
| Kotulo Matla | ~ 193 mpa (Ka moea o futhumetseng h32) | E khetholla boemo ba khatello ea maikutlo nakong ea ho khumama; Matla a phahameng a hloka taolo e hlokolosi. |
| Matla a tšepe | ~ 228 mpa | E bonts'a khatello ea maikutlo pele ho ho se atlehe; e leka-lekaneng bakeng sa ho khumama. |
| Elongation | 12-20% | E bonts'a ho senya; Nako e phahameng ea nako e phahameng e lula e le ntle le ho ba teng. |
| Ho thatafala | E fapana le maikutlo; Maikutlo a monate | Boikutlo bo sola maikutlo (mohlala, H34, H32) ba loketse ho khumama. |
| Khalefo | Tlhaloso | Bend | Lintlha |
|---|---|---|---|
| O (Annealed) | E pakiloe ka botlalo, bonolo, ducfole haholo | E kgabane | E loketse ts'ebetso e rarahaneng; matla a tlase. |
| H32 | E thatafalitsoeng, E tsitsipane (ka thata ka thata) | E ntle | E loketse ho khumama ka kakaretso, lekanya matla le ho senya. |
| H34 | E thatafalitsoeng, E tsitsipane, Ho thatafatsa haholoanyane | E itekanetseng | Hanyane ka hanyane ho feta h32, empa e ntse e sebetsa ka mekhoa e nepahetseng. |
Hlokomela: Ho nolofatsa bohale, Letlapa le letle haholoanyane. Ka lehlakoreng le leng, Bothata bo thata ba leholimo joalo ka H38 kapa h34 e hloka lits'ebetso tse behang ka hloko le radii tse kholo.
| Botenya (mm) | Tekanyetso ea Blucia | Lintlha |
|---|---|---|
| 1-2 mm | Hantle haholo | Bonolo habonolo ka lisebelisoa tse tloaelehileng |
| 3-4 mm | E ntle | E hloka hore e be le liparamente tse laoloang |
| >4 mm | E leka-lekaneng ho e lekanya | E ka hloka lisebelisoa tse khethehileng kapa mekhoa ea mahlale |
Kakaretso: Maqephe a marang-rang a feto-fetoha le maemo a matla le ho feta; Ha botenya bo ntse bo eketseha, Kotsi ea ho akheha kapa disaformation e eketseha ntle le haeba ho lateloa mekhoa e nepahetseng.
Ho fihlella ho hloekile, Bend ea mahala e kenyelletsa ho khetha mokhoa o nepahetseng le ho khomarela mekhoa e metle.
| Mokhoa | Ho tshwaneleha | Melemo | Meeli |
|---|---|---|---|
| Ho khumama hoa moea | Tloaelehileng ka lesela | Matla a fokolang, Seta se bonolo | Bend Bend Radii, Ho ka ba le monyetla oa ho hlaha |
| Ho khumama ka tlase | Ho itlosa bolutu | Taolo e Ntle ea Radius Radius | Matla a mangata a hlokahalang |
| Ho khumama | Kotula, Mefuta e rarahaneng | E loketse li-curve tse thata | Lisebelisoa tse Tebileng |
| Radius radius | E khothalelitsoe 5052 H32 | Lintlha |
|---|---|---|
| ≥ 1 X latla le boima | Bakeng sa 1 Mam teemane leqephe le tenneng, ≥ 1 mm | E thibela ho hlatsoa le ho boloka ho senya |
| < 1 X latla le boima | Ha e khothalletsoe ho fepa khalefo e thata | Kotsi ea ho akheha le deformation |
| Alloy | Bend | Khanyetso ea Corrosion | Matla | Lisebelisoa tse Tloaelehileng |
|---|---|---|---|---|
| 5052 | E kgabane (Bakeng sa mocheso o bonolo) | E kgabane | E itekanetseng | Marine, litanka tsa mafura, lipane |
| 6061 | E ntle | E ntle | E phahameng | Sebopeho, sefofane |
| 3003 | Hantle haholo | E ntle | Tlase | Mokhabiso, lisebelisoa tsa ho pheha |
| 5052 (H32) | E ntle | E kgabane | E itekanetseng | E tšoanang le kaholimo |
Temohisiso: 5052Ho hanyetsa ho hanela ha meqomo e phahameng haholo ho etsa hore e tšoanelehile haholo maemong ao ho pepesetsoa mongobo kapa letsoai le atileng, le ho beleha ha moea o bonolo oa moea o tiisa ho nolofalletsa ho theha.
Huasheng 5052 Sheet ea aluminium
Boemo: Ho etsa paner ea mafura a mafura a mafura a leoatle le 3 MM Tetra 5052-H32 Sheet Aluminium Sheet.
Sephetho: Panel e ile ea kokobela ka katleho ntle le mapetso, Ho Boloka Tšepahatso, Ka lebaka la mokhoa o nepahetseng le kutloisiso ea thepa ea lintho tse bonahalang.
Huasheng Aluminium, morekisi ea etellang pele indastering ea Aluminium, e hlophisehe ka ho fana ka lihlahisoa tsa boleng bo phahameng ba aluminium, ho kenyeletsa 5052 lishiti li loketse ho khumama tse fapaneng le ho theha lits'ebetso. Lihlahisoa tsa bona li ithorisa:
Ka ho khetha Huaang Aluminium, Baetsi ba ka netefatsa ho tšepahala ha lintho, e bohlokoa bakeng sa likopo tse tebileng tse hlokang ho khumama.
Araba: Ee, haholo-holo ho terompeta e sootho joalo ka o kapa h32, Empa ho khumama khafetsa ho ka baka ho thatafala, e lebisang ho o hlasimollang. Ho molemo ho rera tatellano ea ho banya ka hloko.
Araba: Ho ipapisitse le bohale ba aloy le botenya. Ka tloaelo, koala ka sekhahla sa ho fihlela ho 90 ° o finyeletse ntle le ho akheha ha mocheso o bonolo, Empa marang-rang a thata a lokela ho hlahlojoa.
Araba: PRIVIT PRIVE (ho pota 150 ° Cels C) e ka ntlafatsa kotsi, haholo-holo bakeng sa maqephe a thekellang kapa mocheso o boima, ho fokotsa kotsi ea ho akheha.
Araba: Eseng kamehla. Bakeng sa mocheso o bonolo joalo ka o kapa h32, ho etsa lintho ha ho hlokahale; Leha ho le joalo, Bakeng sa khalefo e thata, ho ikopanya ho ka ntlafatsa ho ba le bokhabane.
Araba: Ho hlaphoheloa ha Allaminium ho hlaphoheloa kelellong. Ho buseletsa, ho feta hanyane 'me u sebelise sesebelisoa se nepahetseng ho netefatsa li-angles tse nepahetseng.
Ho becha 5052 Maqephe a aluminium ke taba ea ho ba teng, e susumetsoa haholo ke bohale bo allang, botenya, Mokhoa oa ho ba, le ho boloka.
Ka kakaretso, 5052 aluminium, Haholo-holo ho Tefoneng e Monate e kang O & H32, e bonts'a ho futsisa, ho e etsa hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng tsa likopo.
Leha ho le joalo, Ho nahanisisa ka hloko ea bend radii, Ts'ebeliso ea Matla, le liparamente tse bohlokoa li bohlokoa ho thibela ho qhekella kapa ho baleha.
Baetsi le li-rabricrine li tlameha ho amohela mekhoa e tataisang - joalo ka ho khetha mekhoa e nepahetseng ea ho khetha, Ho sebelisa lisebelisoa tse loketseng, le ho utloisisa thepa ea lintho tse bonahalang - ho ntlafatsa katleho.
Khetho ea mofani oa thepa, Jwalo ka Huakheng Anuminium, e ka etsa bonnete ba boleng le ho nahanisisa, Ho fana ka khotso ea kelello mabapi le ho batla likopo.
Ha re phethela, ka taolo e nepahetseng le ea ts'ebetso, 5052 Li-Sheet tsa Aluminium li hlile li bohlokoa, ho fana ka maemo a 'mele le ho tšoarella ha litlhoko tse fapaneng tsa khoebo.
Hlokomela: Bakeng sa likopo tse tobileng, Kamehla etsa liteko tsa pele le ho sheba libaka tsa theknoloji tse fanoang ke bahlahisi ba fanoeng ke bahlahisi ba fuoeng ba humanehin ho netefatsa bend radii, Litlhoko tsa Qoso, le boitlamo ba moea.
Khoasolla PDF：Khoasolla
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
