A cikin duniyar Alumanum, 5052 ya fito fili a matsayin kyakkyawan zabi saboda kyakkyawan juriya na lalata, matsakaicin ƙarfi, da kuma aiki mai ban mamaki.
Duk da haka, tambaya cewa akai-akai ya taso tsakanin injiniyoyi, masana'anta, da masu son kai ne ko 5052 Aluminum zanen gado da gaske ba tare da sulhu da amincinsu ba.
Wannan jagorar jagora na nufin rushe wannan batun, samar muku da zurfin fahimta cikin lanƙwasa 5052 aluminum sheets, Bangare ta hanyar bayanai, fasaha bayani dalla-dalla, da la'akari da hankali.
Shin 5052 Aluminum
Kafin ruwa a cikin dalla-dalla dalla-dalla, Fahimtar abubuwan da suka dace na 5052 Aluminum yana da mahimmanci.
Wannan duka yana cikin Ubangiji 5000 jerin, wanda aluminum ya rigaya tare da magnesium, Bayar da kyakkyawan lalata juriya, mai kyau weldability, da kuma matsakaici-zuwa-babban ƙarfi.
| Dukiya | Ƙayyadaddun bayanai |
|---|---|
| Haɗin Sinadari | Aluminum (Al) ma'auni, Magnesium (Mg) 2.2-2.8%, Chromium (Cr) 0.15-0.35% |
| Ƙarfin Ƙarfi | 228 MPa (33 ksi) na hali |
| Ƙarfin Haɓaka | 193 MPa (28 ksi) na hali |
| Tsawaitawa a Break | 12-20% ya danganta da fushi |
| Juriya na Lalata | Madalla, musamman a muhallin ruwa |
| Aiki | Yayi kyau sosai, gami da lankwasawa, kafa, da machining |
Lankali Yana nufin ikon ƙarfe na ƙarfe don yin amfani da filastik na filastik-ba tare da fatattaka ko rashin nasara ba. Abubuwa da yawa sun rinjayi shi:
A aikace-aikace da yawa kamar tsarin marine, sassa na mota, da bangarori na ado, da ikon yin lanƙwasa zanen gado a cikin siffofi masu hadaddun ba tare da lalata kayan da ke tabbatar da kara biyun ba.
Garawar gwajin Huasheng 5052 Aluminum Sheet
| Dukiya | Darajar / Range | Alamu don lanƙwasa |
|---|---|---|
| Ƙarfin Haɓaka | ~ 193 MPa (cikin fushi H32) | Yana tantance matakin damuwa yayin lanƙwasa; babban ƙarfi yana buƙatar sarrafawa a hankali. |
| Ƙarfin Ƙarfi | ~ 228 MPa | Yana nuna matsakaicin damuwa kafin kasawa; matsakaici don lanƙwasa. |
| Tsawaitawa | 12-20% | Yana nuna karkara; mafi girma elongation yana daidaita tare da ingantaccen lanƙwasa. |
| Tauri | Ya bambanta da fushi; Temirin Softer suna da Ductile | Tsoron Softer (misali, H34, H32) sun fi dacewa da lanƙwasa. |
| Haushi | Bayani | Lankali | Bayanan kula |
|---|---|---|---|
| O (Annealed) | Cikakken Annanedined, taushi, mai tsananin dumama | Madalla | Mafi dacewa ga masu hadaddun ayyukan; ƙananan ƙarfi. |
| H32 | Taurare, Tsage (a matsakaici) | Yayi kyau | Ya dace da abin da ya dace, daidaita karfi da kuma bata iyaka. |
| H34 | Taurare, Tsage, more hardening | Matsakaici | Dan kadan karancin gwiwa fiye da H32, Amma har yanzu aiki tare da ingantattun dabaru. |
Lura: Da softer da karfi, mafi tanƙen takarda. Akasin haka, Harder masu tsorkyewa kamar H38 ko H34 suna buƙatar ƙarin hanyoyin kulawa da girma.
| Kauri (mm) | Bendable Rating | Bayanan kula |
|---|---|---|
| 1-2 mm | Yayi kyau sosai | A sauƙaƙe tare da daidaitattun kayan aikin |
| 3-4 mm | Yayi kyau | Na bukatar secoates da aka sarrafa |
| >4 mm | Matsakaici zuwa iyakance | Na iya buƙatar kayan aiki na musamman ko dabaru |
Takaitawa: Thinner zanen gado suna da sauƙin sauyawa; Kamar yadda kauri ke ƙaruwa, haɗarin fashewa ko nakasa yana ƙaruwa sai dai idan an bi su da ingantattun hanyoyin.
Cimma mai tsabta, Crapp na kyauta ya ƙunshi zabar hanyar da ta dace da kuma bin mafi kyawun ayyukan.
| Hanya | Dace | Amfani | Iyakance |
|---|---|---|---|
| Aikin iska | Gama gari a cikin ƙira | Kasa da karfi, saiti mai sauƙi | Mafi girma lend radii, m ga springback |
| Lotan ƙasa | Madaidaiciya lanƙwasa | Mafi kyawun kulawa da lend radius | Moreari da ake buƙata |
| Rotary lake | M, Hanyoyin hadaddun | Ya dace da igiyoyin | Kayan aiki-m |
| Lanƙwasa radius | Nagari don 5052 H32 | Bayanan kula |
|---|---|---|
| ≥ 1 X Sheet Kauri | Domin 1 mm lokacin farin ciki, ≥ 1 mm | Yana hana fashewa da kuma kula da bututun halitta |
| < 1 X Sheet Kauri | Ba a ba da shawarar don tsananin tsaunin ba | Hadarin fashewa da lalata |
| Alloy | Lankali | Juriya na Lalata | Ƙarfi | Aikace-aikace na yau da kullun |
|---|---|---|---|---|
| 5052 | Madalla (Don tsawan tsinkaye) | Madalla | Matsakaici | Marine, tankunan mai, bangarori |
| 6061 | Yayi kyau | Yayi kyau | Mafi girma | Tsarin halitta, sararin samaniya |
| 3003 | Yayi kyau sosai | Yayi kyau | Kasa | Ado, kayan dafa abinci |
| 5052 (H32) | Yayi kyau | Madalla | Matsakaici | Kama da sama |
M: 5052'Sofrenancin lalata juriya na lalata da suka dace da shi musamman ga mahalli inda bayyanar danshi ko gishiri ya mamaye danshi ko gishiri, da lanƙwasa a cikin tsinkaye masu taushi suna tabbatar da sauƙin tsari.
Huasheng 5052 Pinayium na aluminum
Yanaren duniya: Samar da marine mai ruwa mai ruwan sama tare da 3 mm lokacin farin ciki 5052-h32 na aluminum.
Sakamako: An sami nasarar kwarara ba tare da fasa ba, Kula da tsarin da aka tsara, Sakamakon dabarun da ya dace da fahimtar kaddarorin kayan.
Huasheng Aluminum, mai samar da kaya a cikin masana'antar aluminum, kwarewa wajen samar da kayayyakin aluminum, ciki har da 5052 zanen gado ya dace da tanadi da kuma samar da aikace-aikace daban-daban. Kayan kayan su suna alfahari:
Ta hanyar zabar mutane huasheng, Masu masana'antun zasu iya tabbatar da amincin kayan, wanda yake da mahimmanci ga mahimman aikace-aikace da ke buƙatar daidaitawa.
Amsa: Ee, musamman a cikin tsananin zafin jiki kamar O ko H32, Amma maimaita lanƙwasa na iya haifar da hardening, kaiwa ga fatattaka. Zai fi kyau a tsara tsarin da yake kulawa a hankali.
Amsa: Ya dogara da fushin alheroy da kauri. Yawanci, A tanƙwara kusurwa har zuwa 90 °, Amma ya kamata a gwada lanƙwasa.
Amsa: Kadan pre-dumama (kusan 150 ° C) na iya inganta kayan maye, Musamman don zanen gado ko kuma tsayayyen tsayayye, rage hadarin fashewa.
Amsa: Ba koyaushe. Don tsinkayen tsinkaye kamar O ko H32, Annealing ba lallai bane; duk da haka, don tsananin tsoran, Annealing na iya inganta lanƙwasa.
Amsa: Alumuran na Alumum na Alumum na Aluminum yana haifar da Springback. Don rama, over-lanƙwasa dan kadan da amfani da kayan aikin da ya dace don tabbatar da ingantaccen kusurwoyi.
Da lanƙwasa na 5052 Aluminum zanen gado ne na nata, mai tasiri ta hanyar yin fushi, kauri, Hanyar lada, da kayan aiki.
Gabaɗaya, 5052 aluminum, musamman a cikin tsananin tsaunuka kamar o da h32, nuna kyakkyawan wuce gona da iri, Yin shi ya dace da aikace-aikace da yawa.
Duk da haka, hankali da hankali lanƙwasa, Aikace-aikace tilasta, da aiwatar da sigogi yana da mahimmanci don hana fatattaka ko nakasa.
Masana'antu da masu ƙirƙira dole ne suyi amfani da dabarun da aka kera - irin su zabar hanyoyin da suka dace, Yin amfani da kayan aikin da suka dace, da kuma fahimtar kaddarorin kayan - don kara samun nasara.
Zabi na mai ba da kaya, Kamar Husherg aluminum, na iya kara tabbatar da inganci da daidaito, samar da zaman lafiya a aikace-aikacen neman.
A karshe, Tare da ingantaccen sarrafawa da sarrafawa, 5052 Aluminum zanen gado ne da gaske da gaske, Bayar da sassauci da karkara don bukatun masana'antu daban-daban.
Lura: Don takamaiman aikace-aikace, Koyaushe yin gwaje-gwaje na farko da kuma koyar da bayanan fasaha da masana'antu kamar Huashel aluminium don inganta radii, bukatun karfi, da kuma zafin rai.
PDF Download：Sauke
Henan Huasheng Aluminum Co., Ltd., Ltd (HHALU a takaice), kafa a 2001, yana cikin Garin Huiguo, Shahararren babban birnin Aluminum na lardin Henan, Kwararren masana'anta ne kuma yana yin bincike, ci gaba, samarwa, Talla da sabis na aluminum farantin karfe, karfen aluminum, aluminum foil, aluminum tsiri da aluminum da'ira.
Bugu da kari, Har ila yau, HHALU yana sayar da farantin aluminum don gine-gine da jiragen ruwa, aluminum madubi farantin, da mota aluminum gami farantin.
Na 53, Hanyar Dongming, Zhengzhou, Henan, China
Haƙƙin mallaka © Huasheng Aluminum 2025. An kiyaye duk haƙƙoƙi.
