Tsarin Tsarin Kayan Aluminum

Cikakken bayanin al'ada na al'ada karfen aluminum Tsarin samarwa shine kamar haka:

1. Cigaba da jefa a ciki da mirgina: 7-8 mm aluminum billets an birgima cikin coils sannan sanyi yayi birgima zuwa lokacin kauri.
2. Hade a hade a cikin tsari da mirgina tsari: 15-20 mm aluminum billets suna mai zafi da zafi yi birgima zuwa 1-2 mm a kan uku-tsaye m mirgina niƙa, sannan ya gama birgima ko ci gaba da sanyi a cikin kayan bakin ciki.
3. Zafi gama mirgine zuwa 3-4 mm, coused da sanyaya, sannan sanyi yayi birgima zuwa takamaiman kauri, misali, Zai iya zama mara nauyi don samfuran samfuran kamar su aluminum foil.

Ingancin ƙasa: Cigaba da jefa a ciki da mirgina > zafi mirgina > hade a hade da mirgine.

Kayan aikin injin: zafi mirgina > hade a hade da mirgine > Cigaba da jefa a ciki da mirgina.

Samfuran da aka yi birgima suna da finer surface, Fiye da daidaitawa, kuma yana inganta ƙarfi na tensile da elongation, wanda yake da mahimmanci ga aikace-aikace waɗanda ke buƙatar mafi girma mawuyacin hali.

Wannan labarin yana ba da cikakken bayani game da Cigaba da Cast-Rolling, ci gaba da jefa & m, zafi mirgina, da sanyi mirgina, nuna bambance-bambance, abũbuwan amfãni, da aikace-aikace.

Ci gaba da jefa-mirgina vs. Ci gaba da Yin Wasa & Mirgina

(1) Cigaba da Cast-Rolling

• Hakanan ake kira “m mirgine” ko “ruwa mirgina.”
• Kai tsaye pours moltt a cikin mirgine Rolls don cystallization.
• Tsarin aiwatarwa a ciki Babban tsarin hatsi amma mai santsi surface ba tare da fata mara amfani ba.

(2) Ci gaba da Yin Wasa & Mirgina

• Siffofin slads slabs kafin sake yin amfani da mirgine su cikin zanen gado.
• Matakin dumama Inganta bututu, Yin hakan da ya dace domin aikace-aikacen da ke bukata babban notormation.

Ga teburin alloy nau'ikan da kuma wuraren aikace-aikacen da za a iya samarwa a cikin ci gaba da jefa kuri'a da kuma layuka layin：

Zafi mirgine vs. Cold Rolling

(1) Hot Rolling

• Yi a sama 400°C don inganta inji Properties na aluminum.
• Amfani dashi Babban karfin aluminum, amma na iya haifar da fata na iskar shaka.

(2) Cold Rolling

• Yi birgima a zazzabi a daki, sakamakon Babban daidaito kuma mafi girman karewa.
• Dace da daidaitaccen kayan aluminum da aikace-aikacen zane-zane.

Kwatanta hanyoyin mirgina

Ta hanyar fahimtar waɗannan hanyoyin mirgina, Masu kera na iya Inganta yanke shawara na samarwa kuma Inganta ingancin samfurin.

Ƙarin teleho:

Adadin aluminum aluminum a cikin babban matakin farfado don maki daban-daban:

• 1070 kuma sama da tsarkakakkiyar aluminium: Ba za a iya ƙara ƙwayoyin scrap ba; Za'a iya amfani da ingantaccen kayan ado na alloum.
• 3104/3105 gami: Scrap Aluminum Aluminum ya kai 70%-80%.
• 1XXX jerin tsarkakakkiyar alalum: Ana iya ƙara jerin gwanon-1xxx kawai kawai.
• 3/4/5/6/8 jerin: Scrap Aluminum Aluminum ya kai 40%.