1. Selelekela

Aluminium foil bakeng sa pakete ea chokolete e ntse e le molao oa indasteri bakeng sa tatso e bolokiloeng, sebopeho le boipiletso ba pono ho ka ketane ea phepelo.

Chokolete e tsotella oksijene, mongobo, Tse bobebe le tsa mocheso; Pakete e nepahetseng e phahamisa monko le sebopeho, e thibela thunya ea mafura, 'me e fana ka maikutlo a mochine oa pele.

Sengoliloeng sena se etsa se tebileng, Tlhahlobo e mengata ea meputso - lisebelisoa tsa lisebelisoa, tlhahiso, tshebetso mokoallo, Likhetho tsa moralo, taolo ea taolo le ts'ebetsong - 'me e kenyelletsa lintlha tsa palo le litlhahiso tse sebetsang tsa baenjiniere ba liphuthehong, Li-Anager tsa Lihlahisoa le Li-Packers.

Aluminium foil bakeng sa pakete ea chokolete

2. Saense ea Boitsebiso ba Chocoum Foils Foil

Ts'ebetso ea foil ea aluminium naheng ea pokello ea chokolete e hlahisoang ke thepa ea mahlale a eona, e hlalosang litšobotsi tsa mantlha tse kang sebopeho sa barrier, sebopehong, polokeho, le ho hokahana le mela ea litebele tsa indasteri.

2.1 Mefuta ea foil ea aluminium bakeng sa pakete ea chokolete

AA1235 AUUMINUM FELA (HUTY ≥ 99.35%)

• Aloy e atileng haholo bakeng sa phokotso ea chokolete e otlolohileng
• Ultra-soft (O bohale) Bakeng sa maemo a phahameng haholo
• Polo e phahameng ka ho hanyetsa li-gages tse tšesaane
• Maemo a tlase haholo a Fe le Si, Ho fokotsa brittleness

Aa145 AUUMINUM FELA (HUTY ≥ 99.45%)

• Tlhoekiso e phahameng ho feta a1235
• E babatsehang khanyetso ea corrosion
• E sebedisoang ha ho buoa ka li-corker tsa lik'hemik'hale ho hlokahala (mohlala, Chocolate ea Premium)

Aa8011 Aluminium foil (Al-fe-allow)

• E sebelisoa ka li-lamemates tse ling moo matla a phahameng a hlokahalang
• E na le 0,5-1% fe, 0.3-0.8% e joalo
• Ha e fetohe letoto la 1xxx le ho fana ka matla a mangata a ho etsa mosebetsi o boima haholo

2.2 Khetho ea Aluminium

Botenya ke ntho ea bohlokoa ea boemo bo makatsang ba maemo, Ts'ebetso ea Mechanini, le litšenyehelo. Mefuta e tloaelehileng ea teropo ea chokolete e kenyeletsa ho bala ha chokolete e kenyelletsa:

6-9 μm (Monate oa Ultra-Thil)

• E sebedisoang bakeng sa bophahamo bo phahameng, Liphohetso tse tlase tsa chokolete
• Ho feto-fetoha le maemo
• Kotsi e eketsehileng e eketsehileng ea likomhole
• Molemo ka ho fetisisa bakeng sa mechini ea ho phalla

10-12 μm (Premium Wro ea Ikahetseng ea WPA)

• Botenya haholo bakeng sa mekoallo ea chokolete
• Tekanyo e loketseng ea:
  • Thepa ea mokoallo
  • Memori memori
  • Matla
  • Litšenyehelo
• E ntle haholo bakeng sa ho ts'oaroa le ho phutha

12-20 μm (Mekhabiso e khabisitsoeng kapa e hlophisitsoeng)

• E sebedisoang bakeng sa chokolete e makatsang le li-pliloeng
• E tšehetsa mekhoa e metle e matla
• E phahameng ea ho hanyetsa
• E loketse chocolate e koahetsoeng ka letsoho kapa chocolates

Botenya. Tšebetso ea mokoallo (Hakanyetsa)

2.3 Liaparo & Lacquers (e sebetsang)

• Li-lacquer tsa mocheso: E nolofalletsa ho tiisoa ha hermetic ha foil e sebelisoa e le karolo ea mantlha ea kahare (hangata e sebelisoa ka lehlakoreng la ho ikatisa ka ho tlohela lijo kapa ka peō e hanyetsanang peka e hanyetsang). Matla a tiileng a mocheso a bohlokoa bakeng sa li-wrappers tsa phallo le mehala ea mosamo.
• Li-lacquer tsa tsamaiso tsa lijo / Masala a majabajaba: Fana ka tšitiso e sa sebetseng pakeng tsa chokolete le tšepe (e sebelisitsoe ka ho khetheha moo ho fetisetsoa ke ho fetisoa ke ho tšoenyeha). Li-lacquer li lokela ho ba se ke oa fallela le ho lumellana le melao ea ho ikopanya le lijo.
• Hatisa Primaters & Lipapali tse fetelletseng: Ntlafatsa hodhesion ea ink le ho hanela ho hanela libakeng tse ka ntle tsa mokhabiso.
• Anti-tarnish / Liphekolo tsa Anti-Stain: Holisa li-shelf tsa li-lallic tse sa koaheloang.

1235 Tlhahiso ea Foil ea Aluminium

2.4 Ho lumellana ha lijo

Aluminium foil e sebelisoang ho pakete ea chokolete e lokela ho latela:

• EU 1935/2004 (Lisebelisoa tse etselitsoeng ho ikopanya le lijo)
• IN 602 (Aluminium le aluminium foil foil foil bakeng sa lijo)
• FDA 21 CFR 175.300 (Liaparo tsa polokelo le polymeric)
• ISO 21469 (Litlhoko tsa bohloeki bakeng sa libricats tse sebelisoang ho etsa tlhahiso)

3. Melemo ea foil ea Aluminium bakeng sa pakete ea chokolete

3.1 Ts'ireletso e phahameng ea likharele

• Leseli: E thibela oxidation e nang le mafura le liphetoho tsa mebala.
• Oksijene: Ho nepahala ha oksijene o ka bakang likhama tse matla le ho lieha ho loants'a - ho nyatsa ho kenyelletsoa le litšusumetso tsa nute ebe li tlatsa.
• Mongobo le monko: Nako e nyane ea mongobo le ho boloka monko ha o tsikinyeha hantle.

Ntlha ea data: Sekhahla se ntseng se tsoela pele ho fokotsa phetisetso ea oksijene ho ea pele 0 cm³ / m ea kajeno (e se e sa lumellane), athe mefuta e tloaelehileng ea polymer e kanna ea ba le litaelo tsa li-otrs tsa boholo bo phahameng (mohlala, Pet ~ 10-10 cm³ / Mè ka `ena ho latela botenya).

3.2 Moralo o bobebe le o feto-fetohang

• Katleho ea lintho tse bonahalang: 10 FOM FOIL e na le boima ba Mass ≈ 27 g/m² (2.7 G / cm³ × 0.001 ho sotha). Tlhahisoleseling ena e nyane ea boima ba boima ba 'mele ka bareng' me e kenya letsoho khokahano e tlase ea likoloto ka yuniti.
• Semolao: Foil humetch ea tlhahiso ea gimetry, Ho fokotsa mekotla e matla ea moea e potlakileng e nyenyefatsang.

3.3 Boikarabello bo theko e boima

• Ho sebetsa hantle le lebelo le phahameng la webo ho fokotsa litšenyehelo tse fetolang. Meputso e phahameng e rua molemo ho tsoa ho li-weps tsa cookie kapa tse hatisitsoeng pele ho tlosa mehato ea bobeli. Mela e laoloang hantle e ka fihlela litefiso tse tlase haholo, 'me libaka tsa sejoale-joale tsa mehleng e lebelo li lula li sebetsa ho batho ba makholo-holo ka motsotso (Ho latela mochini).

3.4 Boipiletso bo botle le boemo ba mofuta

• Metallic Sheen, Ho tsamaisa le ho theha makhoaba a khahlano le boleng ba premium. Foil e thusa ho kopanya metallics ka khatiso e phahameng ea maikutlo ka har'a marang-rang a kantle ho nehelano ea mabothobotho.

3.5 Likhetho tse nang le maemo a tlhaho

• Recyclability: Aluminium e potlakile haholo; Recycling Acyum e sebelisa ≈ 95% Matla a tlase ho feta tlhahiso ea masapo a mathomo. Ho rala ea lintlha tse bonahalang (foil + PE) e ka ntlafatsa motho ea ntlafalitsoeng ea ho phela hape ka pampiri e tsoakaneng / polasetiki / foil.
• Litaba tse nchafalitsoeng: Barekisi ba ka fana ka litaba tsa poso kapa tsa post-Consumer tse nchafalitsoeng ho theola carbon.

Melemo ea foil ea aluminium bakeng sa pakete ea chokolete

4. Makhooa a tloaelehileng & Li-laminates tse sebelisitsoeng bakeng sa chokolete

Pakete ea chokolete e hloka taolo e nepahetseng ea tshebetso mokoallo, Matla a Matla, sebopehong, le Tlhahiso ea botle.

Hobane foil e hloekileng ea aluminium e tšesaane haholo ebile e bokhabane ka linako tse tloaelehileng tsa pokello ea chokolete (6-20 μm), Hangata baetsi ba lihlahisoa ba e kopanya ka pampiri, Lifilimi tsa Polymer, kapa likoti tse khethehileng ho theha li-lamuti tse ntlafalitsoeng.

Baenjiniere ba hlophisa meaho ena ho fana ka tšireletso e mengata nakong ea tlhahiso, TLHOKOMELISO, le pontsho ea retail.

5. Mohato oa ho etsa lintho tsa aluminium bakeng sa pakete ea chokolete

5.1 Tlhahiso ea lintho tse tala

1. Ingot casting: Aluminium Angol (1235 kapa 8011 motsoako) li lahleloa ka 700 ° C, ka taolo e thata (mohlala, FE Content ± 0.05% bakeng sa 8011).
2. Hot Rolling: Li-binats li kena ka har'a maqephe a 3-5mm le C.5 ° C, Ho fokotsa botenya ka 90% ka mekhahlelo e mengata.
3. Cold Rolling: Lishiti li ntse li phatloha ho isa ho 0,1-0.2mm le mocheso ka mocheso oa kamore, e nang le metlae e bohareng (350° C bakeng sa 2 lihora) ho boloka khatello ea maikutlo.
4. Foil Rolling: Maqephe a batang a batang a fetisoa ka mekhahlelo ea foil, e fokotsehile haholo 6-15 microns. Maqephe a mabeli a roaloa hammoho (tandem rolling) Ho fihlella botenya ba unifom, ebe oa arohana.

5.2 Hooa le ho ba le tšoaro e kholo

1. Ho hloekisa: Liphonyo li na le likhaello tsa alkaline ho tlosa oli ea ho lla, Ho netefatsa hore ho na le moea oa ho hlasela.
2. Kopo ea ho roala: Anti-thupa (wax / acrylic) kapa tšitiso (Pvdc / Pla) Ho sebelisoa likokomelong ka gravre kapa e slot-st koka, e nang le botenya bo laoloa ho ± 0.5 gsm.
3. Ho omella / ho folisa: Bapetisisi ba omiso ea wax-coll ea koae ka 80-120 ° C kapa ho folisa litlolo tsa ACrylic le Leseli la UV, netefatsa li-solves tse sa feleng ka har'a FDAT ea FDA (≤5 mg / m²).

5.3 Ho Hatisa le ho Khabisa

1. Khatiso: Moriti oa Flexographic o sebelisa lisebelisoa tsa sehlopha (a lumellana le FDA 21 Karolo ea CFR 176.170) ho sebelisa meralo, ka ho ngolisoa hape ± 0,1mm bakeng sa li-prints tse ngata.
2. Embossing: Libaka li feta li ea li-rollers tse ngotsoeng ka 60-80 ° C, Ho theha mekhoa ea 3d ka botebo 5-10 microns. Ho ts'oaroa khatello e laoloa ho qoba methapo ea kutlo (ka tlwaelo 50-70 N / cm²).
3. Slitting le Rewinding: Basebelisi ba folisa mefuta e felileng ho ea bophara ba moreki (100-1000 limilimithara) mme a ba romella 76 Mam Cores Bakeng sa Tlhahiso.

6. Likopo tsa foil ea aluminium bakeng sa pakete ea chokolete

6.1 Motho ka mong oa phuthela

E sebedisoang bakeng sa li-truffles, chokolete, le Bobons. 6-8 Micron Wax-Coted 1235 aluminium foil ke molao, Ha e ntse e robala ka thata ho potoloha libopeho tse sa tloaelehang le li-peellylylylylyly.

Li-Brands tse kang molimo a sebelisa foil e entsoe ka khauta bakeng sa li-truffles ka bomong, ho ntlafatsa boipiletso. Likarabo Lena Tsa Kopo tsa 35% ea ts'ebeliso ea foil ea chokolete (Mokhatlo oa Infectionerry).

6.2 Ho tsamaisa thepa

Li-chokolete tsa chokolete le litafole li sebelisa foil joalo ka sethala se ka hare, e pakiloe ka pakete ea pampiri e ka ntle. 10-12 micron 8011 aluminium foil (Pvdc-catedc) e tloaelehile, Ho fana ka tšireletso ea mongobo ha pampiri e fana ka tšehetso ea sebopeho le sebaka se tlisoang.

Mehlala e kenyelletsa lebese la dadbury Dairy (Al / pampiri ea laminate) le chokolete ea lebese ea Hershey (Al / pet / petetso).

6.3 Pakete ea chokolete

Mefuta e phahameng ea pele (mohlala, Lindt Bokhopo, Neuhaus) Sebelisa 12-15 Liphoofolo tsa micron li lahloa ka li-embossed kapa tse mebala.

Li-moser tsa foil ka mabokoseng a limpho thibela mongobo oa mongobo ho tloha karete ea karete, Le ha metane ea tšepe mabokoseng a kantle e hlahisa mabothobotho.

Setso sa mabothobotho 40% ea chelete ea khale ea chokolete, Le hoja a le litlatsetso 15% ea molumo (Euromonitor).

7. Papiso le Lisebelisoa tse ling tsa ho paka

8. Qetello

Foil aluminium e ntse e tsoela pele ho laola pokello ea chokolete ka lebaka la ho kopanya ha eona e ikhethang ea tshebetso mokoallo, tenyetseha, polokeho ea lijo, Phapanyetsano ea Aesthetic, le recyclability.

Ho tloha ho li-bonbons ka bomong ho isa ho tse ling tse nang le botlolo, bokhoni ba eona ba ho sireletsa khahlanong le oxidation, mongobo Ingress, Tahlehelo ea AROMA, le tšenyo ea 'mele e ntse e tsoela pele ho phela hantle' me e netefatsa boleng bo loketseng ba sehlahisoa.

E tšehelitsoe ke mahlaseli a mangata a bonahalang saense, Tlhahisoleseling e tsoetseng pele ea tlhahiso, le ho tsitsipana ho tsitsipano, Aluminium Foil e lula e le thepa ea bohlokoa ho indastering ea chokolete ea lefatše.

Joalo ka litebello tsa bareki li phahama le li-brands batla litharollo tse phahameng tsa boleng bo holimo, Aluminium foil e tla tsoelapele ho fana ka boleng le ts'ebetso e sa lokelang.

FAQs

Q1 - ke foil ea aluminium e sireletsehileng ho potoloha le chokolete?

Ee. Aluminium ea sehlopha se entsoeng lijong ea lijo e entsoeng le e koahetsoe ka melao ea ho ikopanya le sebaka sa tikoloho (mohlala, Mobu oa EU oa Fetola EC 1935/2004, Taolo e Kopaneng ea FDA FDA) e sireletsehile bakeng sa ho kopana ka kotloloho ka chokolete. Netefatsa hore li-coatis / li-lacquers le likhau li lekoa bakeng sa ho fallela lijong tse mafura.

Q2 - ke botenya sefe se thibelang likotlo ho mela e ikemetseng?

Ha ho na bosholu bo ikhethileng - paramethara ea line le litaba tsa sehlahisoa tsa sebopeho - empa 8-12 μm e tloaelehile bakeng sa maraba a lebelo; Bakeng sa lintho tse tsamaeang ka maoto kapa tse halikiloeng haholo, 12-16 μme e fokotsa menyetla ea ho phunya.

Q3 - e ka emisa mafura a mafura a felisang?

Foil e fokotsa lisosa tsa tikoloho bakeng sa lipalesa tsa mafura ka ho thibela khanya le oksijene; Leha ho le joalo, Ho thibela lipalesa ho itlama haholo ka ho futhumala haholo, Sebopeho, le taolo ea mocheso nakong ea polokelo le lipalangoang.

Q4 - ke foil laminates recyclable?

Foil aluminium ea aluminium e ncha. Li-lamemates (Fool e ne e tlameletsoe pampiring kapa polasetiki e mengata) ho thata haholo ho nchafatsa 'me hangata ho hloka melapo e ikhethang; Ho khetha li-laminates tsa monono ho ntlafatsa potoloho mebarakeng e mengata.

Q5 - teko efe e lokelang ho etsoa lipaketeng tsa chokolete e sebelisang foil?

Khothaletsa: Ho Tšepahala Tia, oksijene & phetisetso ea mongobo (Moo u lekanyang), Ho Tenya ha Mohlahisi le Li-Simulants tse mafura, Puseletso / Teko ea Toaar, tlhatlhobo e potlakileng ea li-sheff (e phahamisa t le rh), le methapo ea kutlo bakeng sa ho fumanoa.

Q6 - hobaneng ha foil e le betere ho feta polasetiki bakeng sa chokolete?

Fil's net-zero oatr le MVTr e holisa bophelo ba shelf ka 2-4 Linako, E thibela ho thunya le ho ba rarane, le li-blocks tse bobebe tsa polasetiki (esita le ea maoatle) ha e khone ho aha aterese ka botlalo.

Q7 -Can Aluminium Foul e hatisoa ka lisebelisoa tsa sehlopha?

Ee. Collexographic khatiso e sebelisa metsi a lumellang a fda-e thehiloeng ho metsi, ka likorapele li tiisa ink khopera le ho se be le ho falla ha chokolete.