Indastering ea kajeno ea likoloi, Ho sebetsa le ho sebetsa hantle ho bohlokoa ho feta leha e le neng pele. Sebaka se le seng ho na le khopolo e potlakileng ea ho iphetola ha lintho tsa boima - haholo-holo bakeng sa lids tsa koloi. Ha bahlahisi ba batla ho ntlafatsa ts'ebetso ea mafura, ntlafatsa ho sebetsana, 'me u kopane le melao ea tikoloho ea tikoloho, Litharo tsa Sheeminum Sheet li fumane tse tummeng haholo. Empa ha se li-aluminium tsohle tse entsoeng e lekana. Ho notlolla bokhoni bo felletseng ba moralo o bobebe, o hloka tharollo e nepahetseng ea sheet e tla kopanya matla, durability, le ea bohlokoa. Tataiso ena e akaretsang e okamela ho tsohle tseo o hlokang ho li tseba ka lishiti tsa aluminium bakeng sa lisere tsa koloi.
Re hlahloba thepa ea lintho tse bonahalang, Mekhoa ea Masela, Litharollo Tse Ikhethileng, le mehopolo e sebetsang ho u thusa ho etsa liqeto tse nang le tsebo.
Hore na u moenjiniere oa likoloi, moetsi, kapa ka cheseho, Poso ena e fana ka leseli la bohlokoa ho ntlafatsa merero ea hau ea makoloi.
Aluminium Sheet bakeng sa kutu ea koloi
Aluminium e fetohile khetho e kaholimo ho moralo oa likoloi, Haholo-holo bakeng sa lids tsa kutu, Ka lebaka la thepa ea eona e ikhethang:
Ho khetha aluminium ha ho joalo ka ho khetha leqephe lefe kapa lefe.
Bohlokoa ke ho khetha ho khetha lekhoakhoa le nepahetseng, botenya, le ka ho fetisisa ho ts'oaretsoa lids tsa kutu. Ho Lekala Ho Lekala, Ho satalla, 'me ho oa ha ho bonolo ho tšoaea liphoso.
| Boemo / Karolo | Alloy letoto | Limaraka tse tloaelehileng | Bohale bo tloaelehileng | Ts'ebeliso e Tloaelehileng | Likarolo tsa sehlooho / Lintlha |
|---|---|---|---|---|---|
| Phanele e kantle (letlalo) | 6xxx | 6016 | T4 / T6 | Kutu e ntle e kantle, mamati, likobo | Sebopeho se setle, Paint-Bake Hardnelling, boleng bo botle |
| Phanele e kantle (letlalo) | 6xxx | 6111 | T4 | Kutu e ntle e kantle, Motseteli O Kantle | Karabelo e matla ea Paint-Bake, Matla a ho qetela a ho qetela kamora ho phekola |
| Phanele e kantle (letlalo) | 6xxx | 6009, 6014, 6022 | T4 | Mekhahlelo ea Exterior, lids tsa kutu | Ho hloka tsebo e leka-lekaneng le matla, E loketse libopeho tse rarahaneng |
| Panel e ka hare | 5xxx | 5182 | O / H111 / H19 | Kutu ea li-trunk, Ntlo ea kahare e ka hare | Ho theha botumo bo botle haholo, matla a phahameng ho feta 5052 / 5a02, Sehlopha sa Panel se sebelisoang haholo |
| Panel e ka hare | 5xxx | 5754 | O / H22 / H24 | Li-panels tse ka hare, litsietsi, Likarolo tsa Chassis | Matla a mahareng, khanyetso e ntle ea kutu, botle ba weldability |
| Ka hare / dikarolo tsa sebopeho | 5xxx | 5052, 5083 | O / H32 / Ba bang | Litšitiso tsa lehae, masakana, Likarolo tsa Tšehetso | Matla a phahameng le ho hanyetsa ho bola, e sebelisitse tse ngata bakeng sa sebopeho kapa ho tsamaisa thepa |
| Liphetoho tsa lehae | 5xxx | 5182 | Hxx | Libaka tsa Hinge / Lock, Liphetoho tsa Tikoloho | Moea o phahameng haholo oa ho tepella le ho satalla libakeng tsa lehae |
| Liphetoho tsa lehae | 6xxx | 6XXX e phahameng haholo ea xxx e matla kapa profiles | T6 / T7x | Hingee Lirokeke, LITLHAKISO TSA BOPHELO | Matla a phahameng kamora kalafo ea mocheso, e sebelisoa moo u lokelang ho e etsa |
| Liphetoho tsa lehae | 7xxx | 7021, 7150, etc. (Ts'ebeliso e lekanyelitsoeng) | T6 / T7x | Li-stiffeners tsa naha tse phahameng | Matla a phahameng haholo; hangata e bolokiloe bakeng sa mefuta ea ts'ebetso, dikarolo tse nyane tsa lehae |
| Boemo / karolo | Boholo bo boholo bo fapaneng (mm) | Hangata e ne e sebelisoa litekanyetso (mm) | Rala Boitšoaro / Maikutlo |
|---|---|---|---|
| Phanele e kantle - koloi e bobebe | 0.65 - 0.75 | 0.65 / 0.70 / 0.75 | Tsepamisa maikutlo ho phokotso ea boima, ka ho ba leta-thata ho tloha boqapi + hemming |
| Phanele ea kantle ea mofuta o tloaelehileng - koloi e tloaelehileng | 0.70 - 0.80 | 0.70 / 0.75 / 0.80 | Boholo bo tloaelehileng bakeng sa sedans / li-SUVs |
| Phanele e kantle - ho satalla ha phahameng | 0.80 - 0.90 | 0.80 / 0.85 / 0.90 | Bakeng sa litenele tse kholo kapa moo ho tsielehileng le ho satalla ho bohlokoa |
| Paneli e ka hare - Moralo o tloaelehileng | 0.70 - 1.00 | 0.80 / 0.90 / 1.00 | Karolo e ka hare ea sebopeho, e hloka ho satalla hantle le motho ea lokelang |
| Panel e ka hare - mohatla o moholo | 0.90 - 1.20 | 1.00 / 1.10 / 1.20 | E sebedisoang bakeng sa li-tailgates tse kholo tsa suv kapa meralo e phahameng |
| Liphetoho tsa lehae | 1.00 - 2.00 | 1.20 / 1.50 / 2.00 | Hinge, Latch, Libaka tsa Striker, kapa likhetla tse nang le tlhokahalo e phahameng ea lehae |
| Kopo / karolo | Kholiso e khothalelitsoeng ea allowe | Khalefo | Botenya (mm) | Lintlha tsa senotlolo tsa ho rekisa |
|---|---|---|---|---|
| Kutu e ntle e kantle (letlalo) | 6016, 6111 | T4 (Paint-Bake) | 0.70 - 0.80 | Boleng bo botle ba bokaholimo, sebopeho se setle, Paint-Bake Hardnente |
| Premium / Sekhahla se phahameng se kantle se kantle | 6016, 6022 | T4 / T6 | 0.80 - 0.90 | Matla a hoqetela a ho qetela, ho ntlafatsoa ha pelo e ntlafalitsoeng bakeng sa tailgium e kholo kapa ea premium |
| Kutu ea li-trunk (maemo) | 5182, 5754 | O / H111 | 0.80 - 1.00 | Sebopeho se setle, Matla a mahareng, worts e ntle le e kholo |
| Kutu ea li-trunk (Tailgate e kholo) | 5182, 5754 | O / H22 / H24 | 0.90 - 1.20 | Ho satalla se phahameng bakeng sa mamati a maholo a Suv / mpv |
| Liphetoho tsa lehae / Sebaka sa Hinge | 5182, 6Letlapa le phahameng la XXX | Hxx / T6 | 1.00 - 1.50 | Matla a phahameng a libaka le ho hanyetsa mekhabiso ea Hinge le Latch |
| Li-stiffeners tsa naha tse phahameng | 6xxx / 7XXX limaraka tse khethiloeng | T6 / T7x | 1.20 - 2.00 | Bakeng sa makoloi a ts'ebetso a hlokang matla a mangata haholo, Libaka tsa bohlokoa |
Li-alloys tse 5xxx le 6xxx li-alloys li qala ho leka-lekana lipakeng tsa matla, sebopehong, le khanyetso ea kutu.
Ke tsona tse sebelisoang haholo bakeng sa lipane tsa 'mele tse kantle ho feta lids tse ling.
Huasheng 6016 Aluminium Sheet bakeng sa kutu ea koloi
Ha o khetha leqephe la aluminium, Shebana le thepa ena:
Ka tloaelo, Maqephe a aluminium a sebelisoang bakeng sa lids tsa kutu li tsoa ho 0.7 mm ho 2.0 mm ho latela moralo, Litlhoko tsa matla, le mekhoa ea tlhahiso.
Mokhoa oa mantlha oa mokoloko o kenyelletsa ho tsitsa, moo masholu a hatelletsoeng ka sebopeho se lakatsehang.
Setšoantšo se tebileng se etsa hore li-contours tse rarahaneng le libui li sebetsa hantle hantle.
Ho ikopanya le li-aluminium bakeng sa lipane tse atolositsoeng kapa matlafatso li kenyelletsa:
Tšebeliso ea likoloi tsa koloi
Lihlooho tse ncha tsa aloy li sutumetsa meeli ea matla a bobebe:
Litlhare tsa mocheso o ntlafatsa thepa ea mochini:
Le ha lishiname li ka ba le litšenyehelo tse phahameng tsa pele ho feta tšepe, Ho Tsamaea ka Pholoso:
Netefatsa hore li-sheet tsa Aluminium li kopana le maemo a joalo:
Iketsetse tšebelisano ka lithunya tse tsebahalang tsa aluminium tse tsejoang ka:
Baqapi ba tlameha ho kenyelletsa ho buseletsoa ka hloko hore ba lule ba le molemo o le bobebe ntle le polokeho:
Sedan e phahameng ea sedan e ile ea nkela thepa ea tšepe e ngata ho lids tse nang le maqephe a 6xxx-letoto la li-aluminium, ho boloka hoo e ka bang 30% Boima ha o ntse o boloka litekanyetso tsa polokeho ea koratseng.
Phello e bile moruo o ntlafalitsoeng oa mafura le boiphihlelo bo boholo ba ho khanna tse ngata.
Moetsi oa moetsi oa Ev o amohetse li-tad tsa li-aluminumum tsa alubum lids ho boima ba lisebelisoa tsa Offset le ntlafatsa mofuta o mong. Lipapatso tse tsoetseng pele li fane ka mokhoa o tšoarellang o hanyetsang mathata a tikoloho, Ho kenya letsoho ho Kholo ea Koloi ea Lifespan.
Lisebelisoa tse hlahang li kenyelletsa li-sensors le bohlale ho beha sekhobo le mokhathala, ho ntlafatsa polokeho le bophelo bo bolelele.
Lisebelisoa tsa AI-Driven li thusa taolo e nepahetseng ea khetho ea khetho ea alloy, phekolo ea holimo, le ho theha, Ho matlafatsa ts'ebetso ea chelete hape.
Litefiso tsa ho nchafatsa li tla ntlafala, 'me litlhaselo tse nang le mekhoa e metle ea eco li tla fetoha tekanyetso, Ho matlafatsa boemo ba aluminium e le khetho e tsitsitseng.
Ho khetha leqephe le nepahetseng la alumunum bakeng sa kutu ea koloi ea koloi e fana ka mokhoa o matlafatsang oa ho ntlafatsa ts'ebetso ea likoloi, polokeho, le setaele.
Ho utloisisa mefuta ea Alloy, thepa ea mochini, Mekhoa ea Boikemisetso, Liphetoho tse nchafatsang li matlafatsa barekisi le barekisi ho ntšetsa pele likarolo tse bobebe tse bobebe.
Ka ho ipeha pele ho matla a phahameng, e thibelang ho bola, le li-sheet tse feto-fetohang tsa aluminium e lumellanang le litlhoko tse ikhethang tsa moralo, Indasteri ea likoloi e ka tsoela pele ho khanna ho ea ho ea sebetsa haholoanyane, ho tshwaraha, le likoloi tsa bareki tsa bareki.
Bokamoso ke ba ba hanyetsang matla a bobebe matla, Ho thata, le e etselitsoeng bokhabane.
Hopola: Ts'ebetso e atlehileng ea li-kuminumu lids li tloha ka tšebelisano lipakeng tsa bo-ramahlale ba thepa, baenjiniere, le bahlahisi.
Boloka bokhachane ba tsoelo-pele ea mahlale, Pele ho boleng, 'me u shebane le ho sebetsa, Moralo oa mosebelisi oa ho notlolla bokhoni ba aluminium e felletseng morerong oa hau oa likoloi.
Matla a bobebe ha se mokhoa feela - ke bokamoso ba li-autothita.
Abelana le PDF: Khoasolla
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
