Indastering e sa fetoheng ea likoloi, ntlafatso le ntlafatso ea ts'ebetso li ka pele ho baetsi ba baetsi ba bahlahisi’ le ba chesehang’ Mehopolo. Ho na le boqapi bo bong bo joalo bo fumanoang tlhahlobo ea bohlokoa ke tšebeliso ea leqephe la aluminium bakeng sa hood koloi.
Tataiso ena e felletseng e ikemiselitse ho hlakoloa lefats'eng la maqephe a aluminium, Elisa melemo ea bona, mefuta, litlhaloso, le lits'ebetso tse sebetsang, Haholo-holo tsepamisa maikutlo karolo ea bona ho ntlafatso ea bona le ho etsa lintho tse ling tsa koloi.
Hore na u mochine o mongata oa litsebi, motho ea chesehang, kapa lintho tse tloaelehileng, Ho utloisisa linate tsa li-aluminium li tla u matlafatsa ho etsa liqeto tse nang le tsebo le ho fihlela liphetho tse phahameng.
Aluminium Sheet hodima koloi
Aluminium, tšepe e bobebe e nang le karohano e ntle ea ho ba boima ba 'mele, khanyetso ea kutu, le ho feto-fetoha ha maemo, e fetohile thepa e ratoang ho thepa ea likoloi le tloaelo.
Kopo ea eona ho li-hoods tsa koloi ha li fokotse boima ba koloi ka kakaretso empa hape e ntlafatsa ts'ebetso, katleho ea mafura, le polokeho.
| Sebopeho | Melemo | Ts'ehetso ea data |
|---|---|---|
| E bobebe | Fokotsa boima ba koloi ka hoo e ka bang 30-40% bapisoa le tšepe, Ho ntlafatsa ts'ebetso ea mafura | Ho latela U.S. Lefapha la Matla, Ho fokotsa boima ba ho fokotsa 10% e ka ntlafatsa moruo oa mafura ka 6-8% |
| Khanyetso ea Corrosion | E ntlafatsa le ho tšoarella le ho etsa koloi ea koloi | Aluminium ka tlhaho e etsa lera le sireletsang oxide, Ho hanela ho sisinyeha maemong a fapaneng |
| Karolelano ea Matla le Boima | E thibela botšepehi ha ba ntse ba fokotsa boima | Aluminium Alloys Like 6061 le 7075 Bontša matla a phahameng a phahameng haholo a loketseng likarolo tsa sebopeho |
| Recyclability | Ho baballa tikoloho, E nchafatsa ntle le tahlehelo ea boleng | Fetile 75% ea Aluminium e kile ea hlahisoa e ntse e sebelisoa kajeno |
Ho khetha leqephe le nepahetseng la aluminum ke la bohlokoa bakeng sa boipiletso bo nepahetseng le boipiletso bo botle.
Litšoaneleho tsa mantlha li kenyeletsa letoto le fapaneng le lillo tse fapaneng, LITLHAKISO TSA BOPHELO, le bokaholimo ba qetello.
| Alloy Series | Litšobotsi | Lisebelisoa tse Tloaelehileng | Melemo |
|---|---|---|---|
| 6061 | E fapaneng, khanyetso e ntle ea kutu, Ho Teba Hantle | Likarolo tsa sebopeho, ka mor'a ho bala | Tekanyo ea matla, boima, le machanebility |
| 5052 | E babatsehang khanyetso ea corrosion, matla a itekanetseng | Likopo tsa sehlopha sa metsing, Li-hoods tsa moetlo | Ho hanyetsa ha meetso e phahameng ea lihlahisoa libakeng tse thata |
| 7075 | Matla a phahameng, e bobebe, e thibang kutu | Li-hoods tse phahameng | Karolelano ea ho ba boima ba 'mele e ikhethang |
6061 aluminium Sheet hodima koloi
| Khalefo | Tlhaloso | Litsi tsa Tšebeliso |
|---|---|---|
| O (annealed) | Bonolo, ductile | E loketse ho khumama le ho theha |
| T4 | Tharollo mocheso-phekolo le ka tlhaho tsofetseng | Ho qothisana lehlokoa le matla le matla a lekanyelitsoeng |
| T6 | E tsofetse ka mor'a ho rarolla kalafo ea mocheso | Matla a phahameng ka ho fetisisa, sebopeho se fokolang |
| Qeta | Tlhaloso | Kopo |
|---|---|---|
| Mill finish | E tala, e kanna ea ba le mefokolo e nyane | E theko e boima, pele |
| E bentšitsoe | Boreleli, bokantle | Li-kholo tsa Aesthetic |
| Anodized | Phekolo ea motlakase ea electrochemical bakeng sa khanyetso e eketsehang | Merero e sirelletsang le e khabisang |
Ho theha se tšoarellang, e bobebe, 'me ka mokhoa o khahlisang o khahlisa hoo a akaretsang lits'ebetso tse nepahetseng tsa tlhahiso. Tsena li kenyeletsa:
Letlapa la aluminium ea mebala bakeng sa hood ea likoloi
| Karolo | Aluminium Sheets | Li-Hoods tsa Steel Hoods |
|---|---|---|
| Boima ba 'mele | 30-40% bobebe | Bokhabane bo boima haholo |
| Khanyetso ea Corrosion | Ka tlhaho oruoa | Hangata e koaheloa kapa e tšoaroa |
| Recyclability | 100% recyclable/, re boloka thepa | E ka sebelisoa hape, empa matla a matla a matla |
| Rala ho feto-fetoha ha maemo | Ho bonolo ho ba hlopha ka libopeho tse rarahaneng | TLHOKOMELISO E BOTSOANG |
| Litšenyehelo | Litsenyehelo tsa pele tsa pele empa li le ka har'a meputso ea ts'ebetso | Ka kakaretso litšenyehelo tse tlase |
| Thepa | Aluminium (6061) | Tšepe (St12) | Phapang |
|---|---|---|---|
| Botenya | 2.70 g/cm³ | 7.85 g/cm³ | ~ 73% e bobebe |
| Matla a tšepe | 290 MPa | 370 MPa | E tlase hanyane empa e lekane hoods |
| Elastic modulus | 69 GPA | 200 GPA | E feto-fetoha le maemo a mangata ka aluminium |
Sehlopha se tummeng sa Racing se ile sa nkela libaka tsa tšepe tse nang le li-variants tsa aluminium, e bakang a Phokotso ea boima ba nako e ka bang 25 kg ka koloi. Sena se ile sa etsa hore a Keketseho e sa tsotelleng ea ho potlakisa le ho sebetsana le tsona.
Lihahi tsa moetlo li sebelisitsoe 6061 lipampiri tsa aluminium ho bonts'a li-craft tse ntle tse nang le li-curves tse rarahaneng le li-vents, Ho Finyella A motsoako oa li-aesthetics le ts'ebetso Le ha e ntse e fokotsa boima ba 'mele.
Likopo tsa Aluminium Car Hood
Huasung Aluminum e tsoana e le morekisi ea etellang pele oa li-sheet tse phahameng tsa boleng bo holimo. Linyehelo tsa bona li kenyelletsa:
Ho khetha Huaangoum Alominium e netefalitse merero ea hau ea boleng bo botle, Setsebi sa Bohlale, le tharollo e ncha e tšelisoang ho ea ho li-comturization tsa likoloi.
| Sehlahisoa | Alloy | Botenya Range | Surface Finish | Theko (ka m²) | E loketse bakeng sa |
|---|---|---|---|---|---|
| Huasong 6061-T6 | 6061 | 0.8mm – 2.0mm | Mill, anodized | $25 – $40 | Sebopeho, ntlafatso ea aesthetic |
| Huaheng 5052-H32 | 5052 | 1.0mm – 2.0mm | E bentšitsoe | $30 – $45 | Marine-Grade, Hoods ea Corroon |
| Ngoe 7075 | 7075 | 1.0mm – 1.5mm | Anodized | $50 – $70 | Li-hoothe tse matlafatsang tse phahameng |
Ee, Aluminium e fana ka khetho e fapaneng e qobelloang ka lebaka la tlhaho ea eona e bobebe, khanyetso ea kutu, le ho nolofalletsa ho kuta. Leha ho le joalo, e hloka mekhoa e fapaneng ea masela le menahano ea ho tšoarella.
Leha ho le joalo Setšoantšo sa Carbon Boikutlo bo le bobebe bo bobebe le matla a phahameng, Aluminium ka kakaretso e theko e tlase haholo, ho bonolo ho e lokisa, 'me u fokotsehe hape. Khetho e itšetlehile ka moralo, litlhoko tsa ts'ebetso, le likhetho tse ntle.
Ee, ka lisebelisoa le tsebo le tsebo, Aliding Aluminium e ka etsahala. Tig Welding e khethoa bakeng sa ho nepahala le matla. Bakeng sa lits'ebetso tse rarahaneng kapa tsa sebopeho, PUSELETSO EA BOPHELO.
Aluminium ke phoso e ngata ho feta tšepe empa e ka hlaseloa tlasa ts'usumetso e kholo. Moralo o nepahetseng le ts'ebetso o ka fokotsa kotsi ena.
Ho ntlafatsa koloi ea hau ka leqephe la aluminium bakeng sa hodima koloi ha se mokhoa oa ho etsa lintho ka mokhoa oa ho ntlafatsa, aesthetics, le ho tsitsa.
Ka kutloisiso e felletseng ea likhetho tsa alloy, Mekhoa ea Masela, le bokhoni ba mofani oa mofani oa bahlahisi ba tsoang ho ba fuoeng ke Huasung Anuminium, Ba-batsebi le litsebi ka mokhoa o tšoanang ba ka fihlela liphetho tse ntle.
Melemo ea Aluminum e ka lebisa ho bobebe, e tšoarelle haholoanyane, le koloi e shebahalang e le e sa boneng tseleng.
Hlokomela: Tataiso ena e hatisa bohlokoa ba ho khetha mamera e phahameng ea aluminium joaloka eo ho tsoa Huasung Aluminum ho netefatsa polokeho, durability, le ts'ebetso e nepahetseng. Kamehla buisana le litsebi kapa baetsi ba lithanello tsa tharollo e hlophisitsoeng e etselitsoeng koloi ea hau e itseng le litlhoko tsa morero.
Khoasolla PDF：Khoasolla
Henan Huasheng Aluminium Co., Ltd (HHALU ka bokhutšoanyane), thehoa ka 2001, e fumaneha Huiguo Town, motse-moholo o tummeng oa Aluminium Profinseng ea Henan, Ke moetsi ea hloahloa ebile o etsa lipatlisiso, ntshetsopele, tlhahiso, thekiso le ts'ebeletso ea aluminium letlapa la letlapa, khoele ea aluminium, aluminium foil, aluminium strip le selikalikoe sa aluminium.
Holim'a moo, HHALU e boetse e rekisa poleiti ea aluminium bakeng sa kaho le likepe, poleiti ea seipone ea aluminium, le poleiti ea aluminium alloy ea likoloi.
No.53, Tsela ea Dongming, Zhengzhou, Henan, China
Copyright © Huasheng Aluminium 2025. Litokelo tsohle li sirelelitsoe.
